Posted: Mon Apr 19, 2021 12:08 Post subject: New Build - 04/19/2021 - r46395
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Little bug on authentication from wireless devices when using repeater mode, they doesn't connect to virtual ap when is used any of the type of security(wep/wpa/wpa2), only can be fixed temporally(lasts till reboot) by applying the current security settings.
Little bug on authentication from wireless devices when using repeater mode, they doesn't connect to virtual ap when is used any of the type of security(wep/wpa/wpa2), only can be fixed temporally(lasts till reboot) by applying the current security settings.
Router/Version: Netgear R8000
File: experimental_driver/netgear-r8000-webflash.bin
Kernel: Linux Netgear-R8000 4.4.267 #2543 SMP Mon Apr 19 09:50:54 +07 2021 armv7l DD-WRT
Previous/Reset: r46316 Standard / Reset router settings many time
Mode/Status: Pure AP (No DHCP,WAN Disabled)
Issues/Errors:
1. wlan0 and wlan2 (5G) only can set [Wireless Channel] to 36,40,44,48,149,153,157,161,165 (Regulatory Domain set to TAIWAN or UNITED_STATES)
2. I set wlan1 [Channel Width] to HT40,but only work HT20 . wlan0 and wlan2 work well at HT40.
3. While open Syslogd and Klogd,lots of [brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)] generated...
4. Status doesn't show the Temperatures of wlan0,wlan1,wlan2
Joined: 08 May 2018 Posts: 14125 Location: Texas, USA
Posted: Thu Apr 22, 2021 2:31 Post subject:
You have to do the settings in the proper order:
Per Yngve Berg wrote:
It's not broken, it's by design.
1) set the Channel Width and Save.
2) Set the Extension Channel UU, LL or UL and save
3) The channel list will now show legal channels with the settings 1-2. Select channel and apply.
1) set the Channel Width and Save.
2) Set the Extension Channel UU, LL or UL and save
3) The channel list will now show legal channels with the settings 1-2. Select channel and apply.
Even in HT20?
1.Select Wireless Mode -> Save
2.Select Channel Width -> Save
3.Select Extension Channel -> Save