New Build - 04/09/2021 - r46316

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2
Author Message
Argenis
DD-WRT User


Joined: 18 Feb 2019
Posts: 159

PostPosted: Tue Apr 13, 2021 3:32    Post subject: Reply with quote
I upgraded from the 03 April 2021 build, but mine shows what I put on it: 0.0.0.0 for gateway and local DNS (it gets those from the modem, and I believe those are default values if nothing is specified).

I do have a WAN IP and I am on the same local DNS network as my modem (otherwise the router doesn't work.

_________________
Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled 
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled 
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled 
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled 
Radar Detection Disabled 
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on
Sponsor
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Tue Apr 13, 2021 3:33    Post subject: Reply with quote
savagepa9an's issue wasn't an issue here for r46316 on either our WRT1900ACSv1 (now reverted for Apple compatibility, including full manual settings due to different radio parameters in last year's builds such as "ath0" versus "wlan0", etc.) or on our WRT1900ACSv2.

We just lost the webif on the ACSv2 after connecting an iPhone X (on 14.4.2 firmware just after update from 13.x) and an iPad Air 2 (on 13.x f/w), both via WPA3-EAP (previoisly via WPA2-EAP on the ACSv1). ACSv2 logs attached. The ACSv1 on now reverted f/w (see my sig below) has been rock solid with the Apple (and other) devices, both earlier today with WPA2-EAP and later today with WPA3-EAP.

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Tue Apr 13, 2021 4:13    Post subject: Reply with quote
savagepa9an wrote:
Has there be a serious change with these builds? I just updated from a very old build from 2020 on my 3200acm, and suddenly, the the router gateway address, local dns and subnet mask are no longer displayed. The fields are just blank. When I do the "ipconfig /all" in windows 10 everything looks fine. Is this normal with the new builds. Also, I noticed the same thing with my r7800. Reseting did not help. I have not problem loging into the router via firefox.

In Basic Settings, Subnet Mask would only have its own line for an old (e.g., last year's) build, so your flash was incomplete. Current build displays it differently! Picture? My guess is you might have better luck trying others' suggestions for particular version of FF browser (e.g., ESR) more carefully, or use Pale Moon or command line.

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum