New Build - 04/09/2021 - r46316

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Sat Apr 10, 2021 21:49    Post subject: Reply with quote
Reload the page.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
Woothie
DD-WRT Novice


Joined: 10 Apr 2021
Posts: 5

PostPosted: Sun Apr 11, 2021 10:44    Post subject: Reply with quote
Router/Version: Linksys EA6350 / v2
File/Kernel: linksys-ea6350-webflash.bin / Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Previous/Reset: First flash from stock via serial
Mode/Status: Client mode / Uptime about 8 hours, still doing OK*.
Issues/Errors: First ever flash with DD-Wrt! Desktop connected via LAN gets nearly full downstream bandwidth, but quite limited upstream to the Internet (original is about 250/250, desktop gets ~250/~30). Also tried in repeater mode, works good save for the expected 50% bandwidth reduction over wifi but same upstream issue over LAN. Could be issue w/ desktop, have not tested a lot. Have not tried most other modules, but I plan to use USB printer, VPN and 6in4. Will report results of these. Disabled 2.4GHz wireless, only using 5GHz

_________________
Routers:
Linksys EA6350v2 - dd-wrt r51506 (Client/Station mode), how-to flash
Ubiquiti UniFi U6 LR - Stock (active AP)
TP-Link Archer C2 v1 - OpenWRT (gathering dust)
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Mon Apr 12, 2021 12:47    Post subject: Reply with quote
Firmware: v3.0-r46316 std (04/09/21)
Router/Version: Netgear R7000
Kernel: Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Previous: v3.0-r46259 std (04/03/21)
Mode/Status: AP wired and wireless, Up and running for 1.5 days.
Reset: Soft boot before and after upgrade
Temperatures: CPU 58.6 °C / WL0 45.4 °C / WL1 50.7 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
mj666
DD-WRT User


Joined: 26 Nov 2010
Posts: 58

PostPosted: Tue Apr 13, 2021 5:20    Post subject: Reply with quote
Router/Version: Asus RT-AC88U
File DD-WRT v3.0-r46316 std (04/09/21)
Kernel: Linux 4.4.265 #2475 SMP Fri Apr 9 08:05:47 +07 2021 armv7l
Previous/Reset: 46069/no
Mode/Status: running with issues
Issues/Errors: The 2.4 GHz Wlan does not show up in GUI and is also not working reliably. Sometimes after a reboot it is there again. Router looks up after a few days (one to multiple days randomly) of operation using builds starting around January 2021. In this situation established connections are still working but new connections are not possible. Also access via GIU or SSH will not work and only power switching will resolve the problem. I have seen this problems with various of the previous builds already. I don't use the experimental build.
The 5Ghz network is now using wl0 instead of wl1 as before. Looks to be the settings are also messed up with 2.4GHz setting. Network interface et1 looks to be the 5GHz now and eth2 is not available anymore when checking with CLI access. Likely the drive is not properly detecting the Wlan devices anymore?

Router/Version: RT-AC68U
File DD-WRT v3.0-r46316 std (04/09/21)
Kernel: Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Previous/Reset: 46069/no
Mode/Status: running
Issues/Errors: none

Router/Version: RT-AC66U
File DD-WRT v3.0-r46316 giga (04/09/21)
Kernel: Linux 4.4.265 #8079 Fri Apr 9 12:06:32 +07 2021 mips
Previous/Reset: 46069/no
Mode/Status: running
Issues/Errors: Wlan may get unreliably and disconnects after a few days. Seen with a few of the latest t releases.

Router/Version: Linksys E3000
File DD-WRT v3.0-r46316 mega (04/09/21)
Kernel: Linux 4.4.265 #8095 Fri Apr 9 12:21:40 +07 2021 mips
Previous/Reset: 46069/no
Mode/Status: running
Issues/Errors: None

I configured a weekly restart to get around some of the problems. May need to go to a nightly restart for more reliability at the moment.

_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 597

PostPosted: Thu Apr 15, 2021 18:46    Post subject: Reply with quote
SirSilentBob wrote:

Cosmetic / UI Error on the management page though? I'm assuming its the new bootfail options people are mentioning maybe? (Photo attached.)

Anyone else with a R7000 have this issue on the management page?


Had the same issue on R7000P, a reboot through web gui solved it.
mj666
DD-WRT User


Joined: 26 Nov 2010
Posts: 58

PostPosted: Sun Apr 25, 2021 16:19    Post subject: Reply with quote
Is there anybody out there who is running an Asus RT-AC88U with an recent DDWRT build without problems? May be my router is slowly dying? The lookups and the "random" unavailability of the 2.4GHz Wlan may be the first symptom's. I need to find an older build which was running well for a while and downgrade to see if this will fix my issues.

mj666 wrote:
Router/Version: Asus RT-AC88U
File DD-WRT v3.0-r46316 std (04/09/21)
Kernel: Linux 4.4.265 #2475 SMP Fri Apr 9 08:05:47 +07 2021 armv7l
Previous/Reset: 46069/no
Mode/Status: running with issues
Issues/Errors: The 2.4 GHz Wlan does not show up in GUI and is also not working reliably. Sometimes after a reboot it is there again. Router looks up after a few days (one to multiple days randomly) of operation using builds starting around January 2021. In this situation established connections are still working but new connections are not possible. Also access via GIU or SSH will not work and only power switching will resolve the problem. I have seen this problems with various of the previous builds already. I don't use the experimental build.
The 5Ghz network is now using wl0 instead of wl1 as before. Looks to be the settings are also messed up with 2.4GHz setting. Network interface et1 looks to be the 5GHz now and eth2 is not available anymore when checking with CLI access. Likely the drive is not properly detecting the Wlan devices anymore?

_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum