Posted: Fri Apr 09, 2021 8:58 Post subject: New Build - 04/09/2021 - r46316
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 18 Mar 2014 Posts: 12839 Location: Netherlands
Posted: Fri Apr 09, 2021 13:06 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r46316M Community Build (04/09/21)
Kernel Version: Linux 4.4.265 #2 SMP Fri Apr 9 12:39:35 CEST 2021 armv7l
Upgraded from: DD-WRT v3.0-r46177M Community Build (03/25/21)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client to Keepsolid working.
Router/Version: D-Link DIR-868L Rev.A1 File/Kernel: dir868a-webflash.bin/ Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r46301 std (04/07/21)/ no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd/ working
Issues/Errors: none
Edit: I just saw the "Bootfail Handling" section under Administration > Management. The first 2 options are clear, but what is the last option "Keep IP after Bootfail"?
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r46316 std (04/09/21) (prev. DD-WRT v3.0-r46301 std (04/07/21))
Kernel: Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: testing since yesterday, 5h:44 up, ok.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-46301_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r46316 big (04/09/21) (prev. DD-WRT v3.0-r46301 big (04/07/21))
Kernel: Linux 4.4.265 #8091 Fri Apr 9 12:18:09 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: testing since yesterday, 4h:40 up, ok.
Joined: 08 May 2018 Posts: 14126 Location: Texas, USA
Posted: Sat Apr 10, 2021 14:01 Post subject:
IONK wrote:
Edit: I just saw the "Bootfail Handling" section under Administration > Management. The first 2 options are clear, but what is the last option "Keep IP after Bootfail"?
Edit: I just saw the "Bootfail Handling" section under Administration > Management. The first 2 options are clear, but what is the last option "Keep IP after Bootfail"?
It means that if you changed the router IP address to something else than 192.168.1.1, it won't change it if you enable that.
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r46316 std (04/09/21)
Kernel Version: Linux 4.4.265 #2470 SMP Thu Apr 8 08:35:46 +07 2021 armv7l
Reset: no (prev build: 45592)
Issues/Errors: Only using as wifi access point, no routing, so my testing is a bit limited.
Cosmetic / UI Error on the management page though? I'm assuming its the new bootfail options people are mentioning maybe? (Photo attached.)
Anyone else with a R7000 have this issue on the management page?