Posted: Thu Jan 28, 2021 14:13 Post subject: New Build - 01/28/2021 - r45592
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• OpenVPNversion 2.5.0 and Guides
• WireGuard1.0.20200908/Tools: Guides, PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• In-kernel Samba (ksmbd 3.3.3) implemented over the past year and default min/max versions changed, with WSD support.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4.
• DHCP and DNS help (English) updated in 43083. #7091
• WRT54G series WAN lease time approaching zero bug fixed in 43191. #6456
• WNR3500Lv2 NAND flash crash bug fixed in 43219 (r43217). #7098
• Dnsmasq version 2.84-test3 with r45592 (2.83 release at r45563, prerelease since r45036).
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with 40562-40566.Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• Broadcom ARM devices missing 5GHz channels, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Thu Jan 28, 2021 19:56 Post subject:
Router: Netgear R7000P
Kernel: Linux 4.4.253 #1912 SMP Thu Jan 28 17:49:55 +07 2021 armv7l
Previous/Reset: r45563 / no
Mode/Status: Gateway AP Unbound JFFS2 / ok
Issues: running well
thanks BrainSlayer and dd-wrt community
Last edited by itwontbewe on Sun Sep 05, 2021 21:51; edited 1 time in total
Netgear R6250
DD-WRT v3.0-r45592 std (01/28/21)
Kernel Version
Linux 4.4.253 #1906 SMP Thu Jan 28 11:38:16 +07 2021 armv7l
Load Average 0.02, 0.02, 0.00
Temperatures CPU 72.5 °C / WL1 54.2 °C
Works well.
How ever, Wireless->wl0/1-Advanced for Wireless GUI Access both disable, then any device surf 192.168.1.1 should refuse work? No, it still allows to access from iPad.
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Fri Jan 29, 2021 7:58 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r45592 std (01/28/21)
Kernel Version Linux 4.4.253 #1906 SMP Thu Jan 28 11:38:16 +07 2021 armv7l
update: CLI r45563 > r45592
reset: NO
status: Operational 12h+
errors: Nothing new, for my set up...
While flashing via CLI (ssh) i keep seen a strange line during the flash procedure, is this normal..?
....
flash : erase[33292288]
flash : erase[33423360]
linux: Invalid argument
flash : write block [0] at [0x00000000]
flash : write block [131072] at [0x00020000]
............ _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r45592 std (01/28/21) (prev. DD-WRT v3.0-r45454 std (01/15/21))
Kernel: Linux 4.4.253 #1906 SMP Thu Jan 28 11:38:16 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 1d up, ok.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45592_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r45592 big (01/28/21) (prev. DD-WRT v3.0-r45454 big (01/15/21))
Kernel: Linux 4.4.253 #6445 Thu Jan 28 18:51:38 +07 2021 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 1d up, ok.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Fri Jan 29, 2021 18:41 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45592_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r45592 mega (01/28/21)
Kernel: Linux 4.4.253 #6449 Thu Jan 28 18:57:19 +07 2021 mips
Mode: Gateway/USB/bwmon
Previous: r45493
Reset?: N
Status: Working
Router/Version: Linksys E3200
File: dd-wrt.v24-45592_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r45592 mega (01/28/21)
Kernel: Linux 4.4.253 #6449 Thu Jan 28 18:57:19 +07 2021 mips
Mode: Guest Gateway/QOS
Previous: r45493
Reset?: N
Status: Working
Joined: 13 Aug 2013 Posts: 6870 Location: Romerike, Norway
Posted: Fri Jan 29, 2021 19:29 Post subject:
Router Name Fjellbu-2
Router Model Asus RT-AC66U
Firmware Version DD-WRT v3.0-r45592 giga (01/28/21)
Kernel Version Linux 4.4.253 #6433 Thu Jan 28 18:33:16 +07 2021 mips
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45592 std (01/28/21)
Kernel Version: Linux 4.4.253 #1906 SMP Thu Jan 28 11:38:16 +07 2021 armv7l
Previous Version: DD-WRT v3.0-r45563
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Reboot: no
Uptime: 1 day, 22:24
Temperatures: CPU 48.0 °C
Errors: as reported in the syslog below
Dec 31 20:00:20 DD-WRT user.err wsdd2[1211]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1217]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1218]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1218]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jan 28 18:38:20 DD-WRT user.err wsdd2[1211]: Terminated received.
Jan 28 18:38:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1217]: ERROR: WARNING: child process exited abnormally: 1218
Jan 28 18:38:22 DD-WRT local5.err ksmbd: [ksmbd-worker/2273]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jan 28 18:38:22 DD-WRT local5.err ksmbd: [ksmbd-worker/2273]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jan 28 18:38:25 DD-WRT local5.err ksmbd: [ksmbd-manager/2772]: ERROR: Failed to create lock file: File exists
Jan 28 18:44:15 DD-WRT daemon.err httpd[1416]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
Jan 28 18:52:01 DD-WRT daemon.err httpd[1416]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jan 28 20:06:59 DD-WRT daemon.err openvpn[4863]: event_wait : Interrupted system call (code=4)
Firmware: v3.0-r45592 std (01/28/21)
Router/Version: Netgear R7000 Kernel: Linux 4.4.253 #1906 SMP Thu Jan 28 11:38:16 +07 2021 armv7l
Previous: v3.0-r45563 std (01/24/21)
Mode/Status: AP wired and wireless, Up and running for 1 1/2 days.
Reset: Soft boot before and after upgrade
Temperatures: CPU 54.1 °C / WL0 43.5 °C / WL1 48.6 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens.
There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Jan 31, 2021 17:09 Post subject:
hurleyp wrote:
There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens.
There should be a master switch to turn on or off that page. There should also be a Reset To Default button once the page is turned on.
Frankly, I am not ready to use that page, other than those what look like iptables settings.... _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Posted: Sun Jan 31, 2021 17:12 Post subject: WRT54GSv1
I tried this build on my WRT54GSv1 still soft brick issue as other posts, no ping, no UI, only switching works. Attached is the cli from first boot on 45229 upgrade and recovery - 45592.txt
I also tried the std, mini, and micro builds with the same results.
For testing I also flashed the mipsel32r1 test build with far worse results, no ping, no WL0, no switching, and could not even login to the router through serial CLI. Results attached as well.
