johnnyNobody999
DD-WRT Guru
Joined: 10 Jan 2014
Posts: 504
|
 Posted: Sat Mar 27, 2021 19:19 Post subject: |
 |
| ho1Aetoo wrote: | pity, that was certainly not necessary
I had actually also linked you the correct procedure
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1232623#1232623
| Quote: | 1 Turn off the power, push and hold the reset button (in a hole on backside) with a pin
2 While still holding the reset button, turn on the power, and the power led starts flashing white (after it first flashes orange for a while)
3 Release the reset button after the power led flashes white (for at least 10 times), execute the tftp command on your computer. (Note: There is no requirement to wait for 10 flashes although Netgear apparently says that in official advice. You can release the button once it starts to flash white (after the orange flashing if over).)
4 The power led will stop flashing if you succeeded in transferring the image, and the router reboots rather quickly with the new firmware. |
|
Maybe I'll get a chance to try that.  |
|
