Posted: Wed Mar 24, 2021 10:17 Post subject: New Build - 03/24/2021 - r46166
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: WRT1900ACSv2 / DD-WRT v3.0-r46166 std (03/24/21)
File/Kernel: ddwrt-linksys-wrt1900acsv2-webflash.bin / Linux 4.9.262 #2509 SMP Wed Mar 24 03:27:57 +07 2021 armv7l
Previous/Reset: r46069 / No
Mode/Status: Gateway, OpenVPN Client, FreeRadius Server
Issues/Errors: Up about 30 minutes so far. GUI is sluggish (about 2.5 seconds to change tabs versus under 0.5 second in r46069), but same since boot to now without any crash. CPU and Memory usage look normal. LMK if I should look for anything in particular in the logs, etc.
EDIT #1: As a follow-up, although I'd intended to let this run all day, fate dealt us an unrelated power failure after a couple of hours up (and I didn't have this unit on a UPS). When power returned, the webif GUI was no better and possibly slower at just over 3.1 seconds per tab change (manually timed with stopwatch). I reset to factory defaults using the webif, but haven't input my settings yet. After reset only, I'm pleased to report that the webif responsiveness is back to normal at less than 0.5 second per tab change. So, no issues so far after the reset. I'll try to notice if/when it slows down as I enter my settings (e.g., Multiple DHCP Servers, etc.), and report back again if anything turns up.
EDIT #2: As a follow-up, a GUI reset and manual reconfiguration of this ACSv2 fully resolved the webif sluggishness. Working well, thanks! Now I'll install r46166 on our ACSv1, which sees more wifi use. _________________ My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Last edited by o2bad455 on Wed Mar 24, 2021 22:23; edited 3 times in total
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r46166 std (03/24/21) (prev. DD-WRT v3.0-r46130 std (03/21/21))
Kernel: Linux 4.9.262 #2509 SMP Wed Mar 24 03:27:57 +07 2021 armv7l
Mode: Gateway, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G, Keep Alive reboot 6:02 in the morning
Reset: No
Status: 2:09h up, ok, load average 0.00, 0.00, 0.00, Temperatures CPU 71.7 °C / WL0 44.9 °C / WL1 46.6 °C.
Unit is working, nothing special. Webif is snappy as always, no slowdowns at all.
Tested multiple wireguard connections, browsing via Wifi 2.4G, 5G and wired. Nothing strange, no jitter, no bloat. According to grep -i taint /var/log/messages nothing special, also greping http does not show anything unusual.
Tested its webif about an hour with waterfox G3 and duckduckgo browser --> each and every menu loaded in an instant.
Finally run routersploit against it, found nothing
Last edited by Zyxx on Wed Mar 24, 2021 18:41; edited 1 time in total
WRT1900ACSV2, serious wifi issues: after a couple of hours devices disconnect and does not connect anymore.
The only access I have is connecting with OpenVPN from mobile network: no http, only ssh. I get this line on /tmp/var/log/messages:
Code:
Mar 24 21:38:00 Router user.info : hostapd : daemon on wlan0 with pid 4776 died, restarting....
[UPDATE] After yesterday reboot it seems everything is working fine. I'll keep an eye on it.
[UPDATE2] here we go again, 24 hours after, same problem.
Last edited by geps on Thu Mar 25, 2021 20:59; edited 2 times in total
Upgraded WRT1200AC v1's from r46130 to r46166 using Brave 1.10.91 (64-bit) running on Linux Mint 20.1 OS hardwired via Cat6.
Successful update and reboot. No reset, nothing disabled prior to update, uptime approx 3 hrs, wired/wireless connected, vpn up immediately (Expressvpn). I do not use NAS. SFE and IPv6 are always disabled. OpenVPN client/DNSMasq, QoS with PIE always enabled. I do not have any Apple devices.
Kernel Version Linux 4.9.262 #2509 SMP Wed Mar 24 03:27:57 +07 2021 armv7l
No issues with a routine update session. Near instant GUI tab change. Wifi devices/phones seems fine will update if issues occur.
Boot brings GUI up again for a short while. (Only minutes - not hours).
Same behaviour as previous build. (46130)
log is incomplete. please provide correct crashlogs and not just one line snippets. beside this. i cannot reproduce such a issue. (ram fault). the webserver does restart itself automatic. no need for reboot. if it doesnt. than you have another serious problem. this can a memory fault or a out of memory because of other custom actions you do. but since you did not provide any details, i cannot help here _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Boot brings GUI up again for a short while. (Only minutes - not hours).
Same behaviour as previous build. (46130)
log is incomplete. please provide correct crashlogs and not just one line snippets. beside this. i cannot reproduce such a issue. (ram fault). the webserver does restart itself automatic. no need for reboot. if it doesnt. than you have another serious problem. this can a memory fault or a out of memory because of other custom actions you do. but since you did not provide any details, i cannot help here
You are right. Flashed back to 46166 from 45993. And I cannot reproduce it again either.
The WRT1900ACS V2 is new. Cannot rule out HW-failure - but runs without issues (besides Wifi problems as described by others) on 45993.
For the sake of clarity. Router replaced TP-link WDR4300 with same setup running DD-WRT a decade or so - all working and stable.
Router setup:
All config entered manually, as advised in this forum. (No restore from the WDR4300).
Router was flashed directly to DD-WRT from stock - so I don't know if there may were issues on stock firmware as well.
Configuration
OpenVPN - tap mode bridged. Utilizing TA-key in addition to certificates. Certificates copied from WDR4300, but entered manually. All working.
Wireguard - configured from scratch. No copy from WDR4300. All done from scratch with new keys. 11 Clients. Non-standard port selected. All working.
Running both Wifi Radios. 5GHZ AC-Only WHT80, 2.4GHZ HT40 Auto Channel NG-Mixed. Security WP2+AES only on both. Clients loosing connection over time. Same issue as described by others. Hits IOS clients first, but the same on a Samsung Mobile (S9+) and 4 Raspberries (2x PI3's, 2x PI4'S). PC's more stable - but also wifi lost eventually.
Running Guest network on both Wifi Radios. Not tested (no guests yet)
Nothing attached or enabled on USB.
Port forwarding utilized for SMTP, IMAP, HTTP and HTTPS. Static leases creates for machines on those services. Issues with one of the static clients (PI4 on Ether, not wifi) but cannot rule out that problem is related to that client. It did run fine on 45993 though.
I have attached messages, after enabling syslog. I also captured the DMESG output from boot. I attached them in a zip. Let me know if there is more I can do. Note - will revert to 45993, but will go back to 46166 if thats needed and is helpful for further development .
Several releases back I noticed a drop in my wifi signal strength. Wifi strength SEEMED to be varying with the releases. It did not affect my wifi connections/streaming but I was concerned at the sudden drop/rise and the possibility that it was connected to firmware builds.
We have had a lot of internet service churn in our neighborhood so I decided to check the channel loads for the 2.4 GHz radio which I use most. I was surprised to see my channel 6 was now the preferred channel in my neighborhood (11 users) where it was completely unused several months ago. Channel 9 was free of users so I switched my 2.4 Ghz radio to that. My Channel quality jumped from 51% to 95% immediately. The solution was so simple it had not occurred to me.
My signal problems were not related to DD-WRT builds. Please disregard my previous mentions of signal strength drops as they were entirely because of my neighborhood channel usage changing over time. If you are experiencing low signal strengths (Status/Wireless/Channel Quality) check the channel usage in your neighborhood.
I'm using Linux Mint so I used the LinSSID app for the check but there are others available for other OS's. Probably not the cause but if you are having wifi drops it may be worth your time to check channel usage in your neighborhood and try using the lowest load channel.
Posting in the new build thread because it's the only place I've mentioned my signal strength drop/rise in the past.
Edit: Actually just use the Site Survey button at the bottom of Status/Wireless tab instead of an app.
...
We have had a lot of internet service churn in our neighborhood so I decided to check the channel loads for the 2.4 GHz radio which I use most. I was surprised to see my channel 6 was now the preferred channel in my neighborhood (11 users) where it was completely unused several months ago. Channel 9 was free of users so I switched my 2.4 Ghz radio to that. My Channel quality jumped from 51% to 95% immediately. The solution was so simple it had not occurred to me.
...
I'm using Linux Mint so I used the LinSSID app for the check but there are others available for other OS's. Probably not the cause but if you are having wifi drops it may be worth your time to check channel usage in your neighborhood and try using the lowest load channel.
...
I know what you mean! My wifi neighborhood is getting worse every day. I've used an Android app called "Coverage" to conveniently survey from a portable device.
But as others' newer hardware does more channel hopping more frequently, I've resorted to Auto Channel settings (Wireless/Basic Settings/Wireless Channel: Auto). I know this used to be buggy (and may still be on different hardware), but it works better than humanly possibly on at least my WRT1900ACSv1! Just checking now, it looks like it's changed 2.4G channel once today, but same 5G channel as yesterday. That's as expected since 2.4G is far more congested than 5G these days. There's no current downside to Auto Channel on at least this device, AFAIK.
I think my only other option would have been to reduce power further (which I've done somewhat for other reasons) and move to a relatively unoccupied but lower power limit channel (e.g., ch. 12 in Canada or ch. 12/13 in USA). But being not far from an airport, that'd be risky business unless I was certain of the rules, radio outputs, and antenna gains. _________________ My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Router/Version: 1900ACS
File/Kernel: r46166 (flashed using FF on W10pro)
Previous/Reset: From 41630, no reset
Mode/Status: Issues/Errors: NO GUI after a few minutes, no accecs to NAS (SMB) at all at the same time. Internet still up on 5Ghz for Windows at time of typing (3rd reboot).
The same issues were in 46166 but that build lasted hours before falling over, this falls over in minutes. I have rebooted 3 times and the same behaviour shows. The GUI seems to appear very quickly when it first comes back up but only stays up for minutes (5-10 if I had to guess
Router/Version: 1900ACS
File/Kernel: r46166 (flashed using FF on W10pro)
Previous/Reset: From 41630, no reset
Mode/Status: Issues/Errors: NO GUI after a few minutes, no accecs to NAS (SMB) at all at the same time. Internet still up on 5Ghz for Windows at time of typing (3rd reboot).
The same issues were in 46166 but that build lasted hours before falling over, this falls over in minutes. I have rebooted 3 times and the same behaviour shows. The GUI seems to appear very quickly when it first comes back up but only stays up for minutes (5-10 if I had to guess
That's really interesting. Assuming you came from 46130 (..you state same behavior in 46166, but I assume you mean 46130 - and that was the previous build?) I also experienced that behavior on both builds. But as you can see from my message above, I'm not able to reproduce it - and therefore cannot provide the logs for investigation. If you can reproduce it, can you share the output from the logs DMESG/Syslog? Seems we are on the same basic hardware, but different variants. And I'm positive that I did experience the httpd - shutdown, several times - so more people with the same experience, indicates that it is not a HW-error which I feared - but something that must have happened in/to the build.
3200ACMv1 (there's no other version to my knowledge) upgraded from previous version, no reset.
So far so good.
The only "error" I found, and it trucks on despite it, is on OpenVPN with OpenSSL (only shows up on the OpenVPN log, so I suspect this might be an OpenSSL/OpenVPN issue and not DDWRT):
19691231 16:00:40 N OpenSSL: error:1416F086:lib(20):func(367):reason(134)
19691231 16:00:40 N TLS_ERROR: BIO read tls_read_plaintext error
Despite that OpenVPN is working, though more than likely with plaintext.
Will update if there's any issues. _________________ Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled
Radar Detection Disabled
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on
Router: Linksys WRT1900ACSv2
Firmware DD-WRT v3.0-r46166 std (03/24/21)
Kernel Linux 4.9.262 #2509 SMP Wed Mar 24 03:27:57 +07 2021 armv7l
Reset: No.
Mode: Shortcut Forwarding Engine - Enable.
SmartDNS: Prefetch Domain - Enable; Serve Expired - Enable; config - /jffs/etc/smartdns.conf.
5 GHz: AP AC/N-Mixed, VNT80, Channel 149+UU, Short Preamble, Short GI, Single User Beamforming.
2.4 GHz: AP NG-Mixed, HT40, Channel 4+U, Short Preamble, Short GI.
Security: WPA2 Personal CCMP-128 (AES) NAS via USB:
/dev/sda - Block device, size 931.5GiB, Partition: 1-Ext4, 2-Ext4 , 3-swap.
NFS Server: Shared the same partitions as in Samba.
Samba: Protocol Version SMB 2.10\SMB 3.11
Issues/Errors:
When you try to connect to the GUI interface, you may lose access to the router, Internet and SMB. The current connection can continue to work, but a new one cannot be received, a reboot of the router is required.
In the log, you can find the following entries (dates are different):
Code:
Mar 25 10:03:35 LinkSYS daemon.info process_monitor[3350]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Mar 25 11:00:06 LinkSYS kern.alert kernel: [82631.938462] Unable to handle kernel NULL pointer dereference at virtual address 00000004
Mar 25 11:00:06 LinkSYS kern.alert kernel: [82631.946620] pgd = de7dc000
Mar 25 11:00:07 LinkSYS kern.alert kernel: [82631.949339] [00000004] *pgd=1d7ed831, *pte=00000000, *ppte=00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82631.955688] Internal error: Oops: 17 [#1] SMP ARM
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82631.960409] Modules linked in: nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre fast_classifier ksmbd ext4 jbd2 mbcache crc32_generic ledtrig_usbport pwrseq_simple pwrseq_emmc ahci_mvebu ahci_platform ahc
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.027751] CPU: 0 PID: 16812 Comm: httpd Not tainted 4.9.262 #2509
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.034042] Hardware name: Marvell Armada 380/385 (Device Tree)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.039985] task: df6fd500 task.stack: dbdee000
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.044581] PC is at sta_set_sinfo+0x9d4/0x1304 [mac80211]
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.050087] LR is at 0x0
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.052628] pc : [<bf02db30>] lr : [<00000000>] psr: 80000013
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.058919] sp : dbdefb78 ip : de180c20 fp : dd2184c0
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.064163] r10: 00000002 r9 : 00000000 r8 : 00000000
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.069407] r7 : 00000000 r6 : d8024150 r5 : d8024000 r4 : dbdefc08
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.075958] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.082511] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.089675] Control: 10c5387d Table: 1e7dc04a DAC: 00000055
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.095443] Process httpd (pid: 16812, stack limit = 0xdbdee210)
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.101473] Stack: (0xdbdefb78 to 0xdbdf0000)
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.105846] fb60: 0000000c dbdefc08
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.114058] fb80: da81cd00 de180c20 d8024150 007da0e9 00000001 d80246b8 d8024150 00000013
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.122269] fba0: 00000000 de181138 00000000 00000001 dbdefc02 dbdefc02 da81cd00 00000002
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.130480] fbc0: 00000000 bf04998c bf04992c dbdefc08 00000001 de096e20 dbdefc02 bf0b2b6c
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.138691] fbe0: dbdefc08 de180000 dd2180c0 dbdefc02 dbdefc08 0000000c de180000 dd2184c8
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.146902] fc00: cd0000d8 9c8ccbfe 1183bf82 00010581 00001cd5 00000078 b617f70b 00004470
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.155113] fc20: 009c0cde 00000000 0450eef1 00000000 00000000 00b4b400 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.163323] fc40: 00000000 00000000 00000000 00000000 00000802 00000002 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.171534] fc60: 00000000 0000b505 0000dcff 00000000 00000000 00000000 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.179745] fc80: 00000000 00000000 00000000 0000001a 00000000 00000000 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.187955] fca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.196166] fcc0: 00000000 00000000 00000000 00000000 00000000 00000000 01000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.204377] fce0: 00000000 00000000 00000000 00000000 de096c00 da81cd00 db053f40 de096e20
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.212588] fd00: 00004000 00000014 de5ee138 c0515f1c de096c00 d829ad00 dbdefd4c d829a300
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.220800] fd20: de096e20 c0517220 bf0d8a10 bf0b2ae0 d829ad00 c0a25540 00000000 c051a5a4
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.229010] fd40: 00000194 00000008 00000000 00000000 bf0b2ae0 00000000 00000000 bf01ef00
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.237221] fd60: 00000000 dbdefd60 d81e6e00 00000001 60000013 d829a300 d829ad00 c051a378
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.245432] fd80: 0000001c c0a05d80 00000000 7fffffff 00000000 c0517088 d829ad00 c0a27860
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.253644] fda0: d829ad00 c05194d0 df4e1c00 de096c00 d829ad00 c0516bb8 0000001c c032e07c
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.261855] fdc0: d829a300 df401d80 d829ad00 c04a3eec ffffffff dbdeff60 d829ad00 00000008
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.270066] fde0: 0000001c de096c00 024000c0 00000000 00000000 c0517c3c dbdefe70 dbdefe04
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.278277] fe00: 0000000c dbdefe70 dbdeff68 dcb56880 00000000 0000067e 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.286489] fe20: dbdefe4c dbdeff60 00000000 df1f7980 00000000 00000000 dbdefe50 dbdefe50
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.294700] fe40: 00000000 c049c284 0000000c 00000000 0000000c c049a8a8 dbdeff60 00000014
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.302911] fe60: 00000000 df1f7980 b6bc4664 c049c3c0 01918fb0 0000001c 01919fc0 00004000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.311122] fe80: dbdee000 656e6e61 00000002 01919000 df0811e0 df662c10 df2937f8 c023c16c
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.319334] fea0: dbdefea0 00000400 01919048 00000010 00000010 00000000 00000000 dd218000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.327545] fec0: 00000033 b6bc46ec 00000024 00000000 b6bc46ec c04daba0 dbdb3180 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.335756] fee0: dbdb3180 dbdb31e4 dbdb321c dc84a488 d9d9ac8c ffffffff ffffffff c0a04450
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.343967] ff00: c0725d90 d9d9ac20 d9d9acc0 fffff000 d9d9ac20 d9d9acc0 c049aa9c d9d9ac20
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.352178] ff20: 00000000 df11ffb8 00000000 df11ff68 00000000 dc84da81 00000000 b6bc46c4
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.360390] ff40: df1f7980 c010bba4 dbdee000 00000128 01913110 c049cb4c 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.368601] ff60: dbdefeb0 0000000c 00000001 00000000 00000000 dbdefe78 00000000 df6fd914
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.376812] ff80: 00000000 00000000 00000000 00000000 dbdeffb0 00000000 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.385023] ffa0: 00000128 c010b9c0 00000000 00000000 00000007 b6bc46c4 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.393234] ffc0: 00000000 00000000 00000000 00000128 b6bc472c b6cd3f94 b6bc4728 01913110
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.401445] ffe0: b6bc4650 b6bc463c b6f7b848 b6f7ad10 60000010 00000007 00000000 00000000
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.409718] [<bf02db30>] (sta_set_sinfo [mac80211]) from [<bf04998c>] (ieee80211_dump_station+0x60/0x78 [mac80211])
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.420252] [<bf04998c>] (ieee80211_dump_station [mac80211]) from [<bf0b2b6c>] (nl80211_dump_station+0x8c/0x110 [mac80211])
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.431458] [<bf0b2b6c>] (nl80211_dump_station [mac80211]) from [<c0515f1c>] (netlink_dump+0x160/0x330)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.440893] [<c0515f1c>] (netlink_dump) from [<c0517220>] (__netlink_dump_start+0x134/0x1cc)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.449367] [<c0517220>] (__netlink_dump_start) from [<c051a5a4>] (genl_rcv_msg+0x22c/0x3c8)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.457840] [<c051a5a4>] (genl_rcv_msg) from [<c0517088>] (netlink_rcv_skb+0x5c/0xc0)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.465702] [<c0517088>] (netlink_rcv_skb) from [<c05194d0>] (genl_rcv+0x24/0x34)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.473216] [<c05194d0>] (genl_rcv) from [<c0516bb8>] (netlink_unicast+0x20c/0x4f0)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.480904] [<c0516bb8>] (netlink_unicast) from [<c0517c3c>] (netlink_sendmsg+0x324/0x36c)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.489203] [<c0517c3c>] (netlink_sendmsg) from [<c049c284>] (___sys_sendmsg+0x238/0x290)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.497416] [<c049c284>] (___sys_sendmsg) from [<c049cb4c>] (SyS_sendmsg+0x68/0xa0)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.505106] [<c049cb4c>] (SyS_sendmsg) from [<c010b9c0>] (ret_fast_syscall+0x0/0x40)
Mar 25 11:00:07 LinkSYS kern.emerg kernel: [82632.512882] Code: e7e31251 e203300f e0822101 e59228cc (e5922004)
Mar 25 11:00:07 LinkSYS kern.warn kernel: [82632.519073] ---[ end trace f7ec9b9dec63b9db ]---
Mar 25 11:03:36 LinkSYS daemon.debug ntpclient[16888]: Connecting to 2.pool.ntp.org [80.249.145.122] ...
Mar 25 11:03:36 LinkSYS daemon.info ntpclient[16888]: Time set from 2.pool.ntp.org [80.249.145.122].
Mar 25 11:03:36 LinkSYS daemon.info process_monitor[3350]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Mar 25 11:15:23 LinkSYS kern.warn kernel: [83548.642781] mroute: pending queue full, dropping entries
Mar 25 11:15:35 LinkSYS kern.warn kernel: [83560.802760] mroute: pending queue full, dropping entries
… many duplicate entries
Mar 25 12:03:37 LinkSYS daemon.debug ntpclient[17411]: Connecting to 2.pool.ntp.org [188.225.9.167] ...
Mar 25 12:03:37 LinkSYS daemon.info ntpclient[17411]: Time set from 2.pool.ntp.org [188.225.9.167].
Mar 25 12:03:37 LinkSYS daemon.info process_monitor[3350]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Mar 25 12:04:02 LinkSYS kern.warn kernel: [86467.682764] mroute: pending queue full, dropping entries
Mar 25 12:04:21 LinkSYS kern.warn kernel: [86486.892759] mroute: pending queue full, dropping entries
… many duplicate entries
Mar 25 12:55:41 LinkSYS authpriv.info dropbear[17848]: Child connection from 192.168.1.106:55855
Mar 25 12:55:42 LinkSYS authpriv.notice dropbear[17848]: Password auth succeeded for 'root' from 192.168.1.106:55855
Mar 25 12:55:45 LinkSYS kern.warn kernel: [89570.402793] mroute: pending queue full, dropping entries
Mar 25 12:55:45 LinkSYS kern.warn kernel: [89571.052766] mroute: pending queue full, dropping entries
Mar 25 12:56:50 LinkSYS kern.warn kernel: [89635.662761] mroute: pending queue full, dropping entries
Mar 25 12:56:52 LinkSYS kern.warn kernel: [89638.162765] mroute: pending queue full, dropping entries
Mar 25 12:56:58 LinkSYS kern.warn kernel: [89643.842771] mroute: pending queue full, dropping entries
Mar 25 12:57:03 LinkSYS kern.warn kernel: [89649.122859] mroute: pending queue full, dropping entries
Mar 25 12:58:01 LinkSYS user.info : init : Terminated....................................
Mar 25 12:58:01 LinkSYS user.info : init : send dhcp lease release signal
Mar 25 12:58:02 LinkSYS user.info : init : Sending SIGTERM to all processes
-------------------------------------------------------------
Mar 26 15:56:09 LinkSYS kern.alert kernel: [97074.132669] Unable to handle kernel NULL pointer dereference at virtual address 00000004
Mar 26 15:56:09 LinkSYS kern.alert kernel: [97074.140901] pgd = dd398000
Mar 26 15:56:10 LinkSYS kern.alert kernel: [97074.143721] [00000004] *pgd=1d050831, *pte=00000000, *ppte=00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.150159] Internal error: Oops: 17 [#1] SMP ARM
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.154881] Modules linked in: nf_nat_pptp nf_conntrack_pptp nf_nat_proto_gre nf_conntrack_proto_gre fast_classifier ksmbd ext4 jbd2 mbcache crc32_generic ledtrig_usbport pwrseq_simple pwrseq_emmc ahci_mvebu ahci_platform ahc
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.222233] CPU: 0 PID: 7526 Comm: httpd Not tainted 4.9.262 #2509
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.228436] Hardware name: Marvell Armada 380/385 (Device Tree)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.234379] task: da2edf80 task.stack: dac3e000
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.238975] PC is at sta_set_sinfo+0x9d4/0x1304 [mac80211]
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.244482] LR is at 0x0
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.247022] pc : [<bf02db30>] lr : [<00000000>] psr: 80000013
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.253313] sp : dac3fb78 ip : de140c20 fp : dde6e4c0
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.258557] r10: 00000002 r9 : 00000000 r8 : 00000000
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.263802] r7 : 00000000 r6 : dabf8150 r5 : dabf8000 r4 : dac3fc08
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.270354] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.276908] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.284072] Control: 10c5387d Table: 1d39804a DAC: 00000055
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.289839] Process httpd (pid: 7526, stack limit = 0xdac3e210)
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.295781] Stack: (0xdac3fb78 to 0xdac40000)
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.300155] fb60: 0000000c dac3fc08
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.308367] fb80: d9660f00 de140c20 dabf8150 0093aa64 00000001 dabf86b8 dabf8150 00000013
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.316578] fba0: 00000000 de141138 00000000 00000001 dac3fc02 dac3fc02 d9660f00 00000002
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.324790] fbc0: 00000000 bf04998c bf04992c dac3fc08 00000001 dcb37220 dac3fc02 bf0b2b6c
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.333000] fbe0: dac3fc08 de140000 dde6e0c0 dac3fc02 dac3fc08 0000000c de140000 dde6e4c8
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.341212] fc00: cd0000d8 9c8ccbfe 1183bf82 00010581 00002793 0000003c 161e9f49 00004f13
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.349423] fc20: 01c5a338 00000000 08581bea 00000000 00000000 00bbba00 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.357633] fc40: 00000000 00000000 00000000 00000000 00000802 00000002 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.365843] fc60: 00000000 0001f501 0001e9c9 00000000 00000000 00000000 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.374054] fc80: 00000000 00000000 00000000 00000018 00000000 00000000 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.382264] fca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.390475] fcc0: 00000000 00000000 00000000 00000000 00000000 00000000 01000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.398687] fce0: 00000000 00000000 00000000 00000000 dcb37000 d9660f00 db6e3f40 dcb37220
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.406899] fd00: 00004000 00000014 de774138 c0515f1c dcb37000 d9660800 dac3fd4c d9660500
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.415111] fd20: dcb37220 c0517220 bf0d8a10 bf0b2ae0 d9660800 c0a25540 00000000 c051a5a4
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.423323] fd40: 00000194 00000008 00000000 00000000 bf0b2ae0 00000000 00000000 bf01ef00
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.431534] fd60: 00000000 dac3fd60 000001f8 00000000 00000001 d9660500 d9660800 c051a378
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.439745] fd80: 0000001c c0a05d80 00000000 7fffffff 00000000 c0517088 d9660800 c0a27860
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.447956] fda0: d9660800 c05194d0 df4e1c00 dcb37000 d9660800 c0516bb8 0000001c c032e07c
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.456167] fdc0: d9660500 df401d80 d9660800 c04a3eec ffffffff dac3ff60 d9660800 00000008
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.464379] fde0: 0000001c dcb37000 024000c0 00000000 00000000 c0517c3c dac3fe70 dac3fe04
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.472591] fe00: 0000000c dac3fe70 dac3ff68 dd7b5740 00000000 00000683 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.480802] fe20: dac3fe4c dac3ff60 00000000 df26d980 00000000 00000000 dac3fe50 dac3fe50
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.489013] fe40: 00000000 c049c284 0000000c 00000000 0000000c c049a8a8 dac3ff60 00000014
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.497224] fe60: 00000000 df26d980 b6bb5664 c049c3c0 008816c0 0000001c 008826d0 00004000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.505435] fe80: dac3e000 656e6e61 00000002 00881700 df0a1340 de5ba110 df13ba18 c023c16c
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.513647] fea0: c022cd4c 00000000 801e001e 024000c0 00000010 00000000 00000000 dde6e000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.521858] fec0: 00000033 b6bb56ec 00000024 00000000 b6bb56ec c04daba0 de09c840 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.530069] fee0: de09c840 de09c8a4 de09c8dc de73f3c8 d20aa08c ffffffff ffffffff c0a04450
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.538281] ff00: c0725d90 d20aa020 d20aa0c0 fffff000 d20aa020 d20aa0c0 c049aa9c d20aa020
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.546493] ff20: 00000000 d201a518 00000000 d201a4c8 00000000 ddf27241 00000000 b6bb56c4
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.554704] ff40: df26d980 c010bba4 dac3e000 00000128 00867100 c049cb4c 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.562915] ff60: dac3feb0 0000000c 00000001 00000000 00000000 dac3fe78 00000000 da2ee394
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.571126] ff80: 00000000 00000000 00000000 00000000 dac3ffb0 00000000 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.579338] ffa0: 00000128 c010b9c0 00000000 00000000 00000007 b6bb56c4 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.587549] ffc0: 00000000 00000000 00000000 00000128 b6bb572c b6cc4f94 b6bb5728 00867100
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.595761] ffe0: b6bb5650 b6bb563c b6f6c848 b6f6bd10 60000010 00000007 00000000 00000000
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.604048] [<bf02db30>] (sta_set_sinfo [mac80211]) from [<bf04998c>] (ieee80211_dump_station+0x60/0x78 [mac80211])
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.614583] [<bf04998c>] (ieee80211_dump_station [mac80211]) from [<bf0b2b6c>] (nl80211_dump_station+0x8c/0x110 [mac80211])
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.625790] [<bf0b2b6c>] (nl80211_dump_station [mac80211]) from [<c0515f1c>] (netlink_dump+0x160/0x330)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.635225] [<c0515f1c>] (netlink_dump) from [<c0517220>] (__netlink_dump_start+0x134/0x1cc)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.643699] [<c0517220>] (__netlink_dump_start) from [<c051a5a4>] (genl_rcv_msg+0x22c/0x3c8)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.652172] [<c051a5a4>] (genl_rcv_msg) from [<c0517088>] (netlink_rcv_skb+0x5c/0xc0)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.660034] [<c0517088>] (netlink_rcv_skb) from [<c05194d0>] (genl_rcv+0x24/0x34)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.667548] [<c05194d0>] (genl_rcv) from [<c0516bb8>] (netlink_unicast+0x20c/0x4f0)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.675236] [<c0516bb8>] (netlink_unicast) from [<c0517c3c>] (netlink_sendmsg+0x324/0x36c)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.683536] [<c0517c3c>] (netlink_sendmsg) from [<c049c284>] (___sys_sendmsg+0x238/0x290)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.691749] [<c049c284>] (___sys_sendmsg) from [<c049cb4c>] (SyS_sendmsg+0x68/0xa0)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.699439] [<c049cb4c>] (SyS_sendmsg) from [<c010b9c0>] (ret_fast_syscall+0x0/0x40)
Mar 26 15:56:10 LinkSYS kern.emerg kernel: [97074.707216] Code: e7e31251 e203300f e0822101 e59228cc (e5922004)
Mar 26 15:56:10 LinkSYS kern.warn kernel: [97074.713702] ---[ end trace 413020f74322cb54 ]---
Mar 26 15:59:12 LinkSYS daemon.debug ntpclient[7602]: Connecting to 2.pool.ntp.org [185.209.85.222] ...
Mar 26 15:59:12 LinkSYS daemon.info ntpclient[7602]: Time set from 2.pool.ntp.org [185.209.85.222].
Mar 26 15:59:12 LinkSYS daemon.info process_monitor[3484]: cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Mar 26 16:05:53 LinkSYS authpriv.info dropbear[7735]: Child connection from 192.168.1.106:49403
Mar 26 16:05:54 LinkSYS authpriv.notice dropbear[7735]: Password auth succeeded for 'root' from 192.168.1.106:49403
Mar 26 16:18:31 LinkSYS authpriv.info dropbear[7735]: Exit (root) from <192.168.1.106:49403>: Error reading: Connection reset by peer
Mar 26 16:20:38 LinkSYS authpriv.info dropbear[7882]: Child connection from 192.168.1.106:63286
Mar 26 16:20:39 LinkSYS authpriv.notice dropbear[7882]: Password auth succeeded for 'root' from 192.168.1.106:63286
Mar 26 16:21:09 LinkSYS user.info : init : Terminated....................................
Mar 26 16:21:09 LinkSYS user.info : init : send dhcp lease release signal
Mar 26 16:21:10 LinkSYS user.info : init : Sending SIGTERM to all processes
Mar 26 16:21:10 LinkSYS kern.notice kernel: klogd: exiting
Mar 26 19:21:10 LinkSYS syslog.info syslogd exiting
