Posted: Fri Mar 12, 2021 14:33 Post subject: New Build - 03/12/2021 - r45993
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r45993 std (03/12/21) (prev. DD-WRT v3.0-r45928 std (03/06/21))
Kernel: Linux 4.4.261 #2248 SMP Fri Mar 12 09:59:49 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 4h up, ok.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45993_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r45993 big (03/12/21) (prev. DD-WRT v3.0-r45891 big (03/04/21))
Kernel: Linux 4.4.261 #7465 Fri Mar 12 17:56:10 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 4h up, ok.
Posted: Sat Mar 13, 2021 1:42 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r45993 std (03/12/21) Kernel: Linux 4.4.261 #2248 SMP Fri Mar 12 09:59:49 +07 2021 armv7l Mode: Gateway, Wireless AP. Reset: Nope. Previous: 03-09-2021-r45955 Status: Working so far, still testing. Startup scripts and Custom scripts in the GUI don't run unless I execute them manually either via the web GUI or Telnet. I'm currently not using a USB drive or SAMBA because they are stupid buggy so...That's new.
https://svn.dd-wrt.com/ticket/7355 https://svn.dd-wrt.com/ticket/7356 https://svn.dd-wrt.com/ticket/7357 https://svn.dd-wrt.com/ticket/7374 Temperatures: CPU 56.9 °C / WL0 46.5 °C / WL1 51.7 °C
Logs.txt
Description:
Full system Logs. MAC scrubbed, the fun stuff at the bottom as usual!
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45993 std (03/12/21)
Kernel Version: Linux 4.4.261 #2256 SMP Fri Mar 12 10:58:46 +07 2021 armv7l
Previous Version: DD-WRT v3.0-r45955 std (03/09/21)
Drivers: Experimental
Services: samba, dlna server, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issue(s): growth in .meta folder and associated file
Reset: no
Reboot: yes
Uptime: 11:02
Load Average: 2.93, 12.83, 21.47
Temperatures: CPU 48.6 °C
Errors: as reported in the syslog below (with external drive of 4T and data 2.5T stored attached to router)
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1178]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT user.err wsdd2[1175]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:21 DD-WRT user.err wsdd2[1175]: error: wsdd-mcast-v6: wsd_send_soap_msg: send: Address not available
Mar 12 22:08:20 DD-WRT user.err wsdd2[1175]: Terminated received.
Mar 12 22:08:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1178]: ERROR: WARNING: child process exited abnormally: 1179
Mar 12 22:08:24 DD-WRT local5.err ksmbd: [ksmbd-manager/2856]: ERROR: Failed to create lock file: File exists
Mar 12 22:09:20 DD-WRT daemon.err httpd[1430]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
Mar 12 22:11:43 DD-WRT user.err wsdd2[3977]: error: wsdd-http-v4: open_ep: SO_BINDTODEVICE: No such device
Mar 13 08:12:45 DD-WRT daemon.err httpd[1430]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Warnings: as reported in the syslog below (with external drive of 4T and data 2.5T stored attached to router)
Dec 31 20:00:19 DD-WRT daemon.warn dnsmasq[1095]: warning: ignoring resolv-file flag because no-resolv is set
Actions and observations:
I placed 14G of data on a 4T clean external drive; windows explorer and dd-wrt usb tab agreed with the size data on the ntfs. There were eleven folders in total accessible across the network from windows explorer. Shortly after connecting the usb to the router the .meta folders appeared and started to grow. Normally these .meta folders would grow to a size of 171 bytes. These folders were growing for in excess of 9 hours and at the time of disconnecting the drive, the size data on the ntfs was 962.3G.
As to accessing from another medium other than windows explorer, of the eleven folders that were saved, only seven, 7, were accessible even after nine hours.
I copied the eleven folders without the .meta folders to a 16G thumb drive and connected to the router. There was no problem. Dd-wrt usb is still reading 14.0G used and all eleven folders are accessible to all network media almost instantaneously.
As to the 2T external drive with data of 1.8T on the ntfs, it cannot be accessed from the windows explorer but it mounts and can be accessed by other media simultaneously.
Update
I have reverted to a build before the new ntfs drivers, an older build, with no issues with the usb, nas, dlna, accessing it from windows explorer or any other medium; the size of the data remains the same whether reported by windows or ddwrt usb tab and there is no delay in accessing the data. In fact, I have 2 external drives attached and I can access each by any means.
What I have lost by giving up this newer build is the download speed; a trade-off that is worth it.
Thanks BS
meta1.png
Description:
Filesize:
4.55 KB
Viewed:
6192 Time(s)
samba.png
Description:
Filesize:
32.45 KB
Viewed:
6192 Time(s)
dlna.png
Description:
Filesize:
35.96 KB
Viewed:
6192 Time(s)
Last edited by Abboo on Mon Mar 15, 2021 0:04; edited 1 time in total
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sat Mar 13, 2021 17:00 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r45993 mega (03/12/21)
Kernel: Linux 4.4.261 #7469 Fri Mar 12 18:02:17 +07 2021 mips
Mode: Gateway/USB
Previous: r45928
Reset?: N
Status: Working
Router/Version: Linksys E3200
File: dd-wrt.v24-#####_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r45993 mega (03/12/21)
Kernel: Linux 4.4.261 #7469 Fri Mar 12 18:02:17 +07 2021 mips
Mode: Guest Gateway/QoS
Previous: r45928
Reset?: N
Status: Working
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Sat Mar 13, 2021 22:37 Post subject:
Router: Netgear R7000P
Kernel: Linux 4.4.261 #2254 SMP Fri Mar 12 10:45:57 +07 2021 armv7l
Reset: no
Mode/Status: Gateway AP 2.4GHz 5Ghz Unbound JFFS2 SFE:Disable static leases / working
Issues: running well thanks BrainSlayer and dd-wrt community
Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Sun Mar 14, 2021 11:26 Post subject:
Router Model: Netgear R6400v1
Firmware Version: DD-WRT v3.0-r45993M Community Build (03/13/21)
Kernel Version: Linux 4.4.261 #1 SMP Sat Mar 13 11:46:56 CET 2021 armv7l
Upgraded from: DD-WRT v3.0-r45948 Community Build (03/08/21)
Reset: No not this time
Status: Up and running for 24 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
Errors: No
Posted: Sun Mar 14, 2021 23:50 Post subject: So Far So Good, With One Potential Security Concern.
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r45993M Community Build (03/13/21)
Kernel Version: Why are we bothering to record this for anything other than custom compilations?
Upgraded from: DD-WRT v3.0-r45863 Community Build (02/28/21)
Reset: GUI reset followed by a few reboots then an NVRam Erase after install.
Configuration:
1. Wireless Access Point Mode
2. WireGuard Client Configured.
3. PBR disabled and Fancy DNS Disabled for testing.
4. 2.4GHz & 5GHz bridged networks.
5. VAP Configured using GUI
a. AP Isolation: Enabled
b. Network Configuration: Unbridged
c. Net Isolation: Enabled
6. VLAN Configured on Port 4 for Work PC:
a. Networking tab, Port 4 moved from vlan1 to vlan3, assigned to bridge “None”
a. Nvram settings corrected.
Wireless Performance:
Wl0-2.4GHz: 54Mb/s WiFi tested on iPhone 11 Pro using the built-in speed checker.
Wl0.1-2.4 GHz VAP: 61.3Mb/s
Wl1-5GHz: 197Mb/s WiFi tested on iPhone 11 Pro using the built-in speed checker.
Internet Performance, about 95Mb/s with or without wireguard.
One thing I noticed was that I could ping the PC on the port 4 wired VLAN which was on a separate subnet until I turned on Net Isolation. That does not seem right, if I am only being protected by a routing script what is the point of the VLAN? _________________ Netgear R7000 Updated ≈ Monthly Wireguard, PBR, VAP
Adblocking & Authoritative, Validating, Recursive Caching DNS Server with DNSSEC via Unbound Verified with ddwrt-dns-monitor.sh and dig Tutorial: How to monitor DNS traffic in real-time
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Wed Mar 17, 2021 13:16 Post subject: New Build - 03/12/2021 - r45993
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.261 #7453 Fri Mar 12 17:36:10 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: kern.warn kernel: br0: received packet on eth1 with own address as source address. That's repeated many times.
Status: Working
Uptime: ~112h
Device is updated via ssh. Router workin rather good. I have problem with MACs still. I don't know how to fix it.