Posted: Wed Mar 24, 2021 10:16 Post subject: New Build - 03/24/2021 - r46166
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Linksys EA8500 / Box Rev.A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r46166 (03/24/21)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.262 #60 SMP Tue Mar 23 03:05:33 +07 2021 armv7l
Previous/Reset: r46130 (03/21/21) / nuked from orbit reset button 10 seconds then later nvram erase && reboot
Mode/Status: AP Gateway / VANILLA, Mixed 20 MHz, Ch 1 & 149, TX Power 30 dBm, Short Preamble, ttraff disabled
Issues/Errors: None / No
DD-WRT ver 10.4-ddwrt-9980-tW-13-6144M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 5506e25d
VANILLA ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 e2c838df
Router/Version: Netgear R7800 / r46166 (03/24/21)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.262 #62 SMP Wed Mar 24 03:15:12 +07 2021 armv7l
Previous/Reset: r46130 (03/21/21) / No
Mode/Status: AP Gateway / VANILLA, Mixed 20 MHz, Ch 1 & 149, TX Power 30 dBm, Short Preamble, ttraff disabled
Issues/Errors: None / No
DD-WRT ver 10.4-ddwrt-9984-tW-13-6144M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 f0f9dc32
VANILLA ver 10.4-3.15-00015 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps,peer-fixed-rate crc32 1aa7bcdd
EDIT: Wanted to try an uptime test so here is the result; R7800 ran as gateway for little over a week and zero issues.
Last edited by blkt on Wed Mar 31, 2021 16:20; edited 1 time in total
R7500v2
DD-WRT v3.0-r46166 std (03/24/21)
Linux 4.9.262 #61 SMP Wed Mar 24 03:05:40 +07 2021 armv7l
CLI upgrade over 46159
No reset
Uptime 16:06
Working wlan0 WDS sta - wlan0 WDS AP vap - wlan1 AP DD-WRT fw - ondemand - up_threshold 20
R7800
DD-WRT v3.0-r46166 std (03/24/21)
Linux 4.9.262 #62 SMP Wed Mar 24 03:15:12 +07 2021 armv7l
CLI upgrade over 46060
No reset
Uptime 15:52
Working GW AP - DD-WRT fw - DDNS - WG server - OVPN client - SMB - ProFTPD - Stubby - ondemand - up_threshold 20
R7800
DD-WRT v3.0-r46166 std (03/24/21)
Linux 4.9.262 #62 SMP Wed Mar 24 03:15:12 +07 2021 armv7l
Main Router
CLI upgrade
No reset
uptime 15:40
Working wlan0 WDS AP - wlan1 AP - OVPN client - SMB - ProFTPD - Stubby - ondemand - up_threshold 35
EDIT: tatsuya46 r45727 workaround required running ng-mixed with DD_WRT firmware for some devices
Previous: RIP44715 You have served me well.
Uptime would be a lot higher if not for the fool who crossed the road
to take out my mailbox and the big utility pole by it one cold night back around christmas.
And against all odds made an escape trailing fluids and parts.
Router/Version: Linksys EA8500
Previous/Reset: r46069 (GUI update) / No
Status: OK
Issues: Yes
I upgraded to r46166 this morning.
My laptop and mobile worked fine.
But in the afternoon, when I went to view Youtube on my Samsung Q70T TV, it could not be accessed, nor Prime Video.
These both worked fine on my laptop.
The TV is connected via ethernet, not wifi.
I tried:
restart TV
Reboot router
reboot switch to TV
change DNS on TV to 1.1.1.1
Nothing worked.
I reflashed router back to r46069 and TV internet now works. _________________ ------------------------------------
Linksys WRT3200ACM DD-WRT r56029 (Gateway)
Linksys EA8500 OpenWrt-23.05.3 (Wired AP)
Netgear WNDR3700v4 DD-WRT r55819 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
Qos doesn't work..it is "broken" on more time..what ever values i put in download and upload section and do speedtest it always exceeds these values to full speeds like it is disabled!
My speeds are 15099kbps Download 852kbps Upload and i setup
MAC Priority for my computer wired to test it.
If you know any solution or something i do wrong please tell me. _________________ Tp-Link WR-1043ND v3
Firmware:DD-WRT v3.0-r47040 (07/12/21)
Qos doesn't work..it is "broken" on more time..what ever values i put in download and upload section and do speedtest it always exceeds these values to full speeds like it is disabled!
My speeds are 15099kbps Download 852kbps Upload and i setup
MAC Priority for my computer wired to test it.
If you know any solution or something i do wrong please tell me.
pointless commit r45727 ruining ng-mixed, make sure to override it manually...
Has BS indicated whether or not this will ever be fixed? Seems like a PITA to have to manually fix this for every new build. _________________ --Netgear R7800--
DD-WRT v3.0-r49492 std (07/14/22)
Qos doesn't work..it is "broken" on more time..what ever values i put in download and upload section and do speedtest it always exceeds these values to full speeds like it is disabled!
My speeds are 15099kbps Download 852kbps Upload and i setup
MAC Priority for my computer wired to test it.
If you know any solution or something i do wrong please tell me.
apparently the apply button in the QoS tab does not work anymore
but if i press the apply button in the firewall tab then the QoS settings are applied
Thank you..one problem solved...i press apply in firewall tab.
When i run cat /proc/net/ip_conntrack
I dont see mark=10 as for Premium priority for my laptop...i see mark=218112 so none priority taking place....any solution for that? _________________ Tp-Link WR-1043ND v3
Firmware:DD-WRT v3.0-r47040 (07/12/21)