Posted: Sat Mar 06, 2021 15:27 Post subject: New Build - 03/06/2021 - r45928
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specificrecovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs in40562 - 40566. Effective startup commandsdiscussion thread is here.
• If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
• Broadcom ARM devices if 5 GHz channels are missing, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!
Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r45928 std (03/06/21) (prev. DD-WRT v3.0-r45891 std (03/04/21))
Kernel: Linux 4.4.259 #2191 SMP Fri Mar 5 23:25:06 +07 2021 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 42m up, ok.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45928_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r45928 big (03/06/21) (prev. DD-WRT v3.0-r45891 big (03/04/21))
Kernel: Linux 4.4.258 #7285 Thu Mar 4 17:55:52 +07 2021 mips
Mode: Gateway, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 38m up, ok.
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45928 std (03/06/21)
Kernel Version: Linux 4.4.259 #2199 SMP Sat Mar 6 12:11:15 +07 2021 armv7l
Previous Version: DD-WRT v3.0-r45891 std (03/04/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 23 min
Load Average: 0.40, 0.33, 0.28
Temperatures: CPU 49.1 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1220]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Mar 6 11:38:58 DD-WRT user.err wsdd2[1217]: Terminated received.
Mar 6 11:39:04 DD-WRT local5.err ksmbd: [ksmbd-manager/2862]: ERROR: Failed to create lock file: File exists
Mar 6 11:41:53 DD-WRT user.err wsdd2[2947]: Terminated received.
Mar 6 11:42:06 DD-WRT local5.err ksmbd: [ksmbd-worker/3372]: ERROR: treecon: user account not found:
Mar 6 11:42:25 DD-WRT kern.err kernel: ksmbd: smb2_query_dir:4101: error while processing smb2 query dir rc = 1
Warnings at March 06 but they were some dated Dec 31 also:
Mar 6 11:39:02 DD-WRT kern.warn kernel: EXT4-fs (sda5): Ignoring removed nobh option
Mar 6 11:39:03 DD-WRT kern.warn kernel: EXT4-fs (sda6): warning: mounting fs with errors, running e2fsck is recommended
Observations:
I did not clean the usb after the upgrade and ntfs mounted
I placed two (2) usernames and passwords in nas
You are asked for a username and password on using windows explorer to access the usb
You cannot access the usb after giving the username and password
I did not tick the box: remember my credentials
Follow up:
I have used a different external hard drive and was able to access the usb from windows explorer. The data on the current external drive is less than 5G but on the previous one, the data size was close to 2T. I do not know if the file size makes a difference.
Additional information:
I saved information on the new drive with data size x given from windows explorer. On looking at the size of the information by the usb tab(dd-wrt), it said the size of that drive is 11x. That increase in size is explained by a '.meta' folder. Is not that strange, a difference of ten (10) times the size of the saved data?
nas.png
Description:
Filesize:
30.11 KB
Viewed:
3094 Time(s)
Last edited by Abboo on Sun Mar 07, 2021 23:21; edited 2 times in total
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sat Mar 06, 2021 19:15 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-45928_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r45928 mega (03/06/21)
Kernel: Linux 4.4.259 #7319 Sat Mar 6 19:58:31 +07 2021 mips
Mode: Gateway/USB
Previous: r45849
Reset?: N
Status: Working
Router/Version: Linksys E3200
File: dd-wrt.v24-45928_NEWD-2_K3.x_mega-e3200.bin
Firmware: DD-WRT v3.0-r45928 mega (03/06/21)
Kernel: Linux 4.4.259 #7319 Sat Mar 6 19:58:31 +07 2021 mips
Mode: Guest Gateway/QoS
Previous: r45849
Reset?: N
Status: Working... QoS issue fixed from previous version
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Mon Mar 08, 2021 7:00 Post subject:
Abboo wrote:
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45928 std (03/06/21)
Kernel Version: Linux 4.4.259 #2199 SMP Sat Mar 6 12:11:15 +07 2021 armv7l
Previous Version: DD-WRT v3.0-r45891 std (03/04/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working with the exception of accessing usb from win7 explorer
Updated: via webgui
Mode: AP/gateway
Issues: cannot access the usb from win7 explorer
Reset: no
Reboot: yes
Uptime: 23 min
Load Average: 0.40, 0.33, 0.28
Temperatures: CPU 49.1 °C
Errors: as reported in the syslog below
Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1220]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send: Network unreachable
Dec 31 20:00:23 DD-WRT kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Mar 6 11:38:58 DD-WRT user.err wsdd2[1217]: Terminated received.
Mar 6 11:39:04 DD-WRT local5.err ksmbd: [ksmbd-manager/2862]: ERROR: Failed to create lock file: File exists
Mar 6 11:41:53 DD-WRT user.err wsdd2[2947]: Terminated received.
Mar 6 11:42:06 DD-WRT local5.err ksmbd: [ksmbd-worker/3372]: ERROR: treecon: user account not found:
Mar 6 11:42:25 DD-WRT kern.err kernel: ksmbd: smb2_query_dir:4101: error while processing smb2 query dir rc = 1
Warnings at March 06 but they were some dated Dec 31 also:
Mar 6 11:39:02 DD-WRT kern.warn kernel: EXT4-fs (sda5): Ignoring removed nobh option
Mar 6 11:39:03 DD-WRT kern.warn kernel: EXT4-fs (sda6): warning: mounting fs with errors, running e2fsck is recommended
Observations:
I did not clean the usb after the upgrade and ntfs mounted
I placed two (2) usernames and passwords in nas
You are asked for a username and password on using windows explorer to access the usb
You cannot access the usb after giving the username and password
I did not tick the box: remember my credentials
Follow up:
I have used a different external hard drive and was able to access the usb from windows explorer. The data on the current external drive is less than 5G but on the previous one, the data size was close to 2T. I do not know if the file size makes a difference.
Additional information:
I saved information on the new drive with data size x given from windows explorer. On looking at the size of the information by the usb tab(dd-wrt), it said the size of that drive is 11x. That increase in size is explained by a '.meta' folder. Is not that strange, a difference of ten (10) times the size of the saved data?
if you want to run it with authentication. do not set the share to "public" public = guest authentication. do not use NT1 protocol with windows 10. use smb 2.10 as minimum _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Mon Mar 08, 2021 16:05 Post subject: New Build - 03/06/2021 - r45928
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.259 #7303 Sat Mar 6 19:33:19 +07 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: kern.warn kernel: br0: received packet on eth1 with own address as source address
Status: Working
[b]Uptime: [/b}~42h
I'm update device via ssh. Generally router work rather good. I have an error in log: "kern.warn kernel: br0: received packet on eth1 with own address as source address" When I'm turn on STP function problem isn't solve.
