[blkt]

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45948 (GitHub mirror)

Notes:
• OpenVPN 2.5.1: Setup Guides, Server, PBR, update tips, scripts and more.
• WireGuard 1.0.20210219/Tools: Setup Guides, Client, Server, Advanced, update tips, scripts and more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• Dnsmasq 2.84 • SmartDNS update • MiniDLNA 1.3.0 • Privoxy 3.0.31 • Unbound 1.13.1 • CoovaChilli 1.6 • OpenSSL 1.1.1j
• In-kernel Samba (ksmbd 3.3.5+): default min/max versions changed. • WSD updated. • ANTFS/NTFS3 kernel mode drivers.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:

[o2bad455]

Router/Version: Linksys WRT1900ACS; DD-WRT v3.0-r45955 std (03/09/21)
File/Kernel: webflash; Linux 4.9.260 #2475 SMP Tue Mar 9 03:13:01 +07 2021 armv7l
Previous/Reset: r45948; No
Mode/Status: FreeRAdius Server; OpenVPN Client
Uptime: 12:11 hours
Issues/Errors: No new issues; Performance is solid, thanks!
Syslog (just for radiusd):
Dec 31 19:00:23 WRT1900ACSv1 daemon.warn radiusd[1590]: Please use tls_min_version and tls_max_version instead of disable_tlsv1
Dec 31 19:00:23 WRT1900ACSv1 daemon.warn radiusd[1590]: Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
Dec 31 19:00:23 WRT1900ACSv1 daemon.info radiusd[1590]: Loaded virtual server
Dec 31 19:00:23 WRT1900ACSv1 daemon.warn radiusd[1590]: Ignoring "sql" (see raddb/mods-available/README.rst)
Dec 31 19:00:23 WRT1900ACSv1 daemon.warn radiusd[1590]: Ignoring "ldap" (see raddb/mods-available/README.rst)
Dec 31 19:00:23 WRT1900ACSv1 daemon.info radiusd[1590]: Loaded virtual server default
Dec 31 19:00:23 WRT1900ACSv1 daemon.info radiusd[1590]: # Skipping contents of 'if' as it is always 'false' -- /jffs/etc/freeradius/sites-enabled/inner-tunnel:336
Dec 31 19:00:23 WRT1900ACSv1 daemon.info radiusd[1590]: Loaded virtual server inner-tunnel

[Argenis]

Upgraded WRT3200ACM from previous version, no reset.

All good so far.

Like the previous release (though this could technically be a device issue not following standards), renewing DHCP lease can lead to not gaining a new DHCP lease if the router didn't have an IP previously registered at least on the GUI side of the house. Syslogd doesn't show a lease either when this happens.

Something to keep an eye out for people that have battery-based devices that don't necessarily wake up for these things and lose their lease.

[o2bad455]

I'm now having a tiny bit of wifi weirdness. I don't have any WPA3 clients of my own, but I'd set up a WPA3-Personal-SAE on 5G for a visiting Dell laptop with Intel AC9560 wireless. To my disappointment, it couldn't connect on WPA3 (and I didn't see any obvious reason in the syslog at the time, unfortunately now wiped after useless reboot); so I added the checkbox for WPA2-Personal-SHA256. Of course the client then connected just fine, but later I noticed that the Status/Wireless/Encryption indicated "disabled" whenever any combination of WPA2-Personal-SHA256 plus one or both of WPA3-Personal and/or WPA2-Personal are enabled. The issue is just for Personal, and NOT present for similar combinations of WPA2/3 Enterprise.

EDIT: The incorrect display status of "disabled" seems to be a bug, although not critical since I think that at least some encryption is actually enabled. Either way, I've opened a ticket here: https://svn.dd-wrt.com/ticket/7366