D LINK DIR-882 AC2600 EXO MU-MIMO Wi-Fi Router

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Author Message
karunale
DD-WRT Novice


Joined: 22 Feb 2021
Posts: 3

PostPosted: Mon Feb 22, 2021 14:58    Post subject: D LINK DIR-882 AC2600 EXO MU-MIMO Wi-Fi Router Reply with quote
Hi guys
Im new and excited to joy the community...


I have purchase new DIR 882 router
its running latest firmware 1.30B06
I was planning flash dd-wrt firmware.

DD-WRT: Factory flash factory-to-ddwrt.bin 2020-11-03 15,21 MB
DD-WRT: Webupgrade dlink-dir882-a1-webflash.bin 2020-11-03 15,21 MB

ixplore 192.168.0.2
I get a time out once I select factory-to ddwrt.bin
time out
I follow these steps

2: You will need to statically assign your computer an IP address of 192.168.0.2 (255.255.255.0).
select the file upload
am I missing a step ?
or is it due to running latest d-link firmware
I tried to downgrade to 1.01 thru factory default gate way select 1.01 it was saying cant downgrade

any help pls Smile
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8384
Location: Texas, USA

PostPosted: Mon Feb 22, 2021 15:27    Post subject: Reply with quote
I presume this is a DIR-882 A1, that *IS* supported by DD-WRT:

https://deviwiki.com/wiki/D-Link_DIR-882_rev_A1

https://wiki.dd-wrt.com/wiki/index.php/Supported_Devices#D-Link

And I am 1000% positive you read through this ENTIRE thread:

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=310590

You will likely have to use the D-Link Emergency Room to downgrade / flash the router. There is an issue with later versions of Internet Explorer, and somewhere in the forum, there is a post about a workaround for this to get Emergency Room to comply that I don't have bookmarked and can't seem to find via Google Embarassed Rolling Eyes

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
karunale
DD-WRT Novice


Joined: 22 Feb 2021
Posts: 3

PostPosted: Mon Feb 22, 2021 18:35    Post subject: Reply with quote
how do I get to D-Link emergency to downgrade original firmware
pls help thanks
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2790

PostPosted: Mon Feb 22, 2021 19:19    Post subject: Reply with quote
Milax wrote:
Did you try reset to Recovery Mode ?

Press and hold the reset button on the router. While keeping that pressed, pull the power cable out and insert it back after 5-10 seconds.
Now let go of the reset button. Wait for about a minute or two and you will see the LEDs blinking .

Assign your computer an IP address of 192.168.0.2 manually. You have to do this by going in the network settings and setting it as ‘manual’. Connect a network cable from your WAN port on the router to the Ethernet port on computer.

Now open Firefox browser and goto http://192.168.0.1. This is the IP of your router and 192.168.0.2 is the IP of your computer.

You should be able to flash your router again

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1228490#1228487

Quote:
. Hold the reset button down.
. While still holding the reset button down, press the power button (to turn the router off) for 5 seconds and then press the button again to turn the router on while still holding down the button. You can also pull the power plug out and back in instead of using the power button.
. Wait 10 seconds and then release. Allow about 90 seconds for the router to boot. The power LED will blink red.

4. You will need to statically assign your computer an IP address of 192.168.0.2 (255.255.255.0).

5. Open Internet Explorer (do not use chrome, firefox, or edge). Go to http://192.168.0.1. The D-Link recovery page will appear. If it doesn't, you did not do the crash recovery properly. Repeat the process.

6. Browse to factory-to-ddwrt.bin file and click Upload.

7. Upgrade process should take 3-5 minutes.

8. When the success page appears, close your browser.

9. Change your IP settings on your computer to either DHCP or statically assign to 192.168.1.xxx (255.255.255.0). The default IP of the router will be 192.168.1.1.

10. Open Internet Explorer and enter 192.168.1.1. DD-WRT will now be installed. You will be prompted to create a username and password.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1145344#1145344

Quote:
Internet Explorer works sometimes however users have reported that FF has better results and works 100% of the time. For IE, lower the IE security settings, add the 192.168.0.1 or .50 to the trusted sites under "sites" in security tab of the Internet Options.

http://forums.dlink.com/index.php?topic=44909.0

Pale Moon, Waterfox ( Classic 56 or 3rd Gen 78 ), Firefox ESR 78 or Release 85 ( 78 reliable, 85 YMMV )

Quote:
ERROR - the image you uploaded failed to pass verification.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1217737#1217737
karunale
DD-WRT Novice


Joined: 22 Feb 2021
Posts: 3

PostPosted: Wed Feb 24, 2021 16:28    Post subject: Reply with quote
so it was the anti virus was holding up firmware update
it got it working nicely now
I notice that wifi icon on windows 10 showing dir 882 wrt 54mbps speed

how do I correct It Im noob to this lol...


Dual-band Wireless AC2600 (1,733 Mbps on 5 GHz + 800 Mbps on 2.4 GHz)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8384
Location: Texas, USA

PostPosted: Wed Feb 24, 2021 16:33    Post subject: Reply with quote
I have never had an issue with Win10 native A/V or even Norton on Mac being an issue with firmware flashing, weird.

You should probably review your wireless settings on the router, perhaps.

https://wiki.dd-wrt.com/wiki/index.php/Basic_Wireless_Settings

https://wiki.dd-wrt.com/wiki/index.php/Advanced_wireless_settings

And again, if you didn't read the thread I linked earlier in this thread, then you probably should Wink Cool Rolling Eyes

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2790

PostPosted: Wed Feb 24, 2021 17:27    Post subject: Reply with quote
Knew I was forgetting something, to mention security software and firewall though it happens less these days.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum