RT-AC1200G
ARM CPU 800 MHz
BCM47189 (ac + eth) + BCM43217 (n)
256 MB DDR3 RAM
16 MB FLASH
4x Gbit lan, 1x wan
1x USB 2.0
2x 5 dbi 2,4 GHz
2x 5 dbi 5 GHz
DC 12V, 2A
I will buy this week in action for 80$, no matter if will be supported or not
I just bought this two of these unit (one as a router and the other as bridge) and now my entire (4000sqft) house gets 90 - 100Mbps down WIRELESS speed without DD-WRT. These units are solid!
As it has gigabit ports and I can find it for a reasonable price in spain. However, I have some doubts, which I don't know if someone can answer (@mominn8266?):
-How is the wifi range?
-IGMP snooping (both in LAN and WLAN) in asuswrt works correctly?
-Will it be compatible with dd-wrt? It already has asuswrt so it should be possible, right?
Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Wed Feb 03, 2016 14:21 Post subject: 128MB
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 admin@192.168.1.1
ASUSWRT RT-AC1200G+_3.0.0.4 Tue Dec 1 01:55:01 UTC 2015
admin@(none):/tmp/home/root# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 1795.68
Features : swp half thumb fastmult edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
looks like only have 128MB RAM do not known, how to disable 2,4 Ghz network, maybe possible thru wl cmd 5Ghz speed reached 100Mbit - Samsung S4 (i9506), have only 100Mbit network @work
I will test 3G dongle and USB speeds @home.
About support dd-wrt, i do not known how to deal with:
SoCs BCM47189 the first to integrate a 2x2 802.11ac radio on a single chip with a CPU and Ethernet switch, which reduces cost while delivering the powerful benefits of 5G WiFi to the entry-level segment.
Posted: Wed Feb 03, 2016 16:01 Post subject: Re: 128MB
gouryella wrote:
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 admin@192.168.1.1
ASUSWRT RT-AC1200G+_3.0.0.4 Tue Dec 1 01:55:01 UTC 2015
admin@(none):/tmp/home/root# cat /proc/cpuinfo
Processor : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 1795.68
Features : swp half thumb fastmult edsp
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
Hardware : Northstar Prototype
Revision : 0000
Serial : 0000000000000000
looks like only have 128MB RAM do not known, how to disable 2,4 Ghz network, maybe possible thru wl cmd 5Ghz speed reached 100Mbit - Samsung S4 (i9506), have only 100Mbit network @work
I will test 3G dongle and USB speeds @home.
About support dd-wrt, i do not known how to deal with:
SoCs BCM47189 the first to integrate a 2x2 802.11ac radio on a single chip with a CPU and Ethernet switch, which reduces cost while delivering the powerful benefits of 5G WiFi to the entry-level segment.
I don't think it will have dd-wrt support as it is a Broadcom device. However, as you already have it, could you tell me about wifi range and wifi N performance in 2.4Ghz? It uses same platform as RT-AC56U and I have read several complaints about really low performance (and nowadays most of my gadgets still use wifi N @2.4Ghz)
Joined: 06 Mar 2010 Posts: 107 Location: Plzeň, CZE
Posted: Wed Feb 03, 2016 22:01 Post subject:
Old brick house, big square flat 144 m2, RT-AC1200G+ in the middle.
About ~20x overlapped 2,4Ghz on wifi analyzer, only my 5Ghz channel (not overlapped)
odroid c1 arch linux as server with iperf3 (192.168.1.16)
I have only mobiles devices @home.
Magic iperf android aplication as client.
iperf3 -c 192.168.1.16 -i 10
sender/receiver [Mbit / s]
Joined: 06 Jun 2006 Posts: 7492 Location: Dresden, Germany
Posted: Tue May 03, 2016 15:13 Post subject:
its now in progress, but may take a while. alot of driver troubles _________________ "So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
I got also an RT-AC1200G+ model, perfect router! with Broadcom BCM47189 (800 MHz) chip. and i am happy when you have n DD-WRT firmware ready for this model.
thank you.. and how many days, weeks or months you need to make this firmware for us?