New Build - 02/11/2021 - r45735

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 10010
Location: Texas, USA

PostPosted: Thu Feb 11, 2021 15:25    Post subject: New Build - 02/11/2021 - r45735 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45729 (GitHub mirror)

Notes:
OpenVPN version 2.5.0 and Guides
WireGuard 1.0.20200908/Tools: Guides, PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• Dnsmasq version 2.84 released with r45632 (2.83 at r45563, prerelease since r45036).
In-kernel Samba (ksmbd 3.3.4+): default min/max versions changed, WSD support, ANTFS and NTFS3 kernel mode drivers.

Issues:
• There may be remaining issues for Samba.

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 470

PostPosted: Thu Feb 11, 2021 16:50    Post subject: Reply with quote
Update method: SSH
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r45735 std (02/11/21)
Previous/Reset: DD-WRT v3.0-r45729 std (02/10/21) / No
Mode/Status: Gateway / Working Normally / Clock 2000MHz
Issues/Errors: None

Thank you, BS!

_________________
Netgear R9000 X10
DD-WRT v3.0-r47381 std (09/08/21)
Gateway, AP, DNSMasq, SFE, Clock 2000MHz
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled
Vanilla, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 3150, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 3160, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
egorenar
DD-WRT Novice


Joined: 26 Dec 2019
Posts: 30

PostPosted: Thu Feb 11, 2021 17:16    Post subject: Reply with quote
Update: Web UI
It works.

_________________
Netgear R9000
-------------------------------------------------------------
Firmware: DD-WRT v3.0-r45767 std (02/17/21)
Overclocking Frequency 1700 MHz
-------------------------------------------------------------
2.4 GHz - Disabled
5 GHz VHT80 AC/N-Mixed Channel 100 UU(+6)
ACK Timing 450, Tx Power 30dbm
SU Beamforming ON, MU Beamforming OFF, U-APSD ON
Protection Mode RTS/CTS, RTS Threshold 784
Beacon Interval 300, DTIM Interval 2
-------------------------------------------------------------
External USB3 drive (extra PSU) + Entware
VPN client, dnsmasq, samba(Entware), nginx, znc
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7493
Location: YWG, Canada

PostPosted: Thu Feb 11, 2021 18:37    Post subject: Reply with quote
Router Model: dir-862L(x2), wndr4300, x86_64(2x qca9984 ,1x qca9888)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

pointless commit r45727 ruining ng-mixed, make sure to override it manually...

(on the other hand.. fixed my qca9888 crash issue finally)

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ------> r47183 std
[QUALCOMM] DIR-862L --------------------------------> r47461 std
▲ ACTIVE / INACTIVE ▼
[QUALCOMM] WNDR4300 v1 --------------------------> r46350 std
[BROADCOM] DIR-860L A1 ----------------------------> r46329 std


Sigh.. why do i exist anyway.. | I love you Anthony.. never forget that.. my other 99% ill never see again..
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5514
Location: Texas

PostPosted: Thu Feb 11, 2021 20:45    Post subject: Reply with quote
Linksys EA8500 ... main router
DD-WRT v3.0-r45735 std (02/11/21)
Linux 4.9.255 #1121 SMP Thu Feb 11 00:51:24 +07 2021 armv7l
GUI install over r44786 using Version 88.0.4324.146 (Developer Build) built on Debian bullseye/sid, running on Debian bullseye/sid (64-bit)
took 2.4 off NG-Mixed & set to mixed before install so we'll see how it does Rolling Eyes
working so far

#

Netgear WNDR3700 V4
DD-WRT v3.0-r45735 std (02/11/21)
Linux 3.18.140-d5 #106500 Thu Feb 11 07:47:43 +06 2021 mips
GUI install over r45667
all worky for what this unit does
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 298

PostPosted: Thu Feb 11, 2021 21:24    Post subject: Reply with quote
Router/Version: R7800
Firmware: DD-WRT v3.0-r45729 std (02/10/21)
Kernel: Linux 4.9.255 #1119 SMP Wed Feb 10 02:02:03 +07 2021 armv7l
Previous: DD-WRT v3.0-r45711 std (02/08/21)
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, NTP TimeSync, VNC Repeater, and Wake-on-WAN (internet)
Issues/Errors: OK

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridges(s)
Netgear R6400v2otp
Asus AC68Ra1, AC66Ua1
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3139

PostPosted: Thu Feb 11, 2021 23:21    Post subject: Reply with quote
Router/Version: Linksys EA8500 / Box Rev.A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r45735 (02/11/21)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.255 #1121 SMP Thu Feb 11 00:51:24 +07 2021 armv7l
Previous/Reset: r45729 (02/10/21) / No
Mode/Status: AP Gateway / Mixed, 20 MHz, Channels 1 and 149, TX Power 30 dBm, Short Preamble
Issues/Errors: None / Uptime 18 minutes

firmware ver 10.4-ddwrt-9980-tW-13-6051M api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 43832ad4
madmark
DD-WRT Novice


Joined: 29 Jul 2019
Posts: 27

PostPosted: Fri Feb 12, 2021 7:17    Post subject: Reply with quote
Router ModelTP-Link ARCHER-C5 v1
Kernel VersionLinux 3.18.140-d5
Previous/Reset: r45036 std (12/18/20) / No
Mode/Status: Gateway /2.4 GHz,5.0 GHz, IPv4, Port Forwarding, NTP TimeSync, Samba, VPN
Issues/Errors: Reset router about every 2 min, Noting in syslog
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 409
Location: Italy

PostPosted: Fri Feb 12, 2021 7:53    Post subject: Reply with quote
R7800 updated via ssh, all works fine here!

Thanks to devs Cool
hansidm
DD-WRT Novice


Joined: 03 Dec 2018
Posts: 2

PostPosted: Fri Feb 12, 2021 14:01    Post subject: Reply with quote
Router/Version: TP-Link ARCHER-C7 v4
File/Kernel: DD-WRT v3.0-r45735 std (02/11/21) / Linux 3.18.140-d5 #106480
Previous/Reset: r45729 / Yes
Mode/Status: 2.4GHz AP NG-Mixed / 5GHz AP N/AC-Mixed
Issues/Errors: See below


1. Setting 2.4GHz to NG-Mixed or Mixed won't enable 802.11n (only b/g). See macOS wireless diagnostics picture below.

2. Manually setting 2.4GHz channel (I tried 1, 6, and 11) will drastically decrease speed, to the same levels as seen in this post: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=328189 . Setting channel to AUTO will make 2.4GHZ at reasonable b/g speeds (still no N).
randan
DD-WRT Novice


Joined: 20 Oct 2020
Posts: 1

PostPosted: Fri Feb 12, 2021 19:23    Post subject: Reply with quote
Router/Version: Netgear X4S R7800.
File/Kernel: r45735 std, Linux 4.9.255 #1123.
Previous/Reset: Netgear v1.0.2.80 (current for R7800), reset to Netgear factory defaults before installing *.img file via Netgear web GUI.
Mode/Status: In service 6+ hours, Ethernet, 2.4GHz, 5GHz, good speed, low error rate.
Issues/Errors: None I'm aware of.
Thank you for builds and wealth of instructions.
James Greystone
DD-WRT User


Joined: 20 Nov 2011
Posts: 169

PostPosted: Sat Feb 13, 2021 1:35    Post subject: Reply with quote
tatsuya46 wrote:
Router Model: dir-862L(x2), wndr4300, x86_64(2x qca9984 ,1x qca9888)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154
https://svn.dd-wrt.com/ticket/7222 *
https://svn.dd-wrt.com/ticket/7226
https://svn.dd-wrt.com/ticket/7246
https://svn.dd-wrt.com/ticket/7284
https://svn.dd-wrt.com/ticket/7331
https://svn.dd-wrt.com/ticket/7338

pointless commit r45727 ruining ng-mixed, make sure to override it manually...

(on the other hand.. fixed my qca9888 crash issue finally)


I started a new post, I discovered that on same build on my R7800, and brand new toy the R9000, if I have the exact same settings and have 5ghz set for AC/N Mixed my devices can see the 5ghz of the R9000 but not the R7800. Only way to have the 5GHZ show up for R7800 is change to mixed. Question
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 409
Location: Italy

PostPosted: Sat Feb 13, 2021 7:58    Post subject: Reply with quote
Edit, found a trouble on R7800:

On this release the LAN stats doesn't report the correct MB in-out

ArjenR49
DD-WRT User


Joined: 05 Oct 2008
Posts: 433
Location: Helsinki, Finland

PostPosted: Sat Feb 13, 2021 10:53    Post subject: Reply with quote
R7800 upgraded via GUI without reset.
No problems.

Thumb drive with two ext4 partitions - JFFS and Optware - attached to USB port get mounted and are accessible by router (dnsmasq.leases & reserved IP file) and my Linux Mint laptop client via SMB (latest version 3.11 for min & max).

2.4 (NG-mixed) & 5 GHz (AC/N-mixed) WLAN OK. 5 GHz speeds up to 433 Mbps as per the gui.

LAN Active client stats look generally ok, but it's hard to verify whether the numbers are correct.
However ... my laptop is sometimes listed with two IP's, one being the reserved IP and the other 169.xxx.xxx.xxx (always the same one). In such case, the # of connections is erroneously shown as 0, but the in/out/totals are going up over time and the connections table does show numerous connections, which is as expected.

UPDATE: in this case - two IP's - the hostname is not shown in the Active Clients list.
Indeed, according to the DNS server's network list the laptop has two different names, the one for 169.xxx.xxx.xxx given as <hostname>.local, whereas the name for the reserved IP is listed as <hostname>.<local domain name>

Whenever the laptop is shown with only its reserved IP after it, the # of connections is non-zero and looks reasonable.

Local clients that use Wireguard VPN (running on a raspberry pi which runs the DNS server, too) sometimes show zero connections, sometimes one (to the WAN IP). Some low traffic totals, but not likely everything (it's a smartphone, chattering or attempting to chatter incessantly)
johnnyNobody999
DD-WRT User


Joined: 10 Jan 2014
Posts: 443

PostPosted: Sat Feb 13, 2021 20:56    Post subject: Reply with quote
Router/Version: R7800
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r45735.bin
Previous/Reset: dd-wrt-webupgrade-netgear_r7800-r44772.bin / no reset
Mode/Status: WDS AP with 4 stations / Working
Issues/Errors: wireguard rate dropped from 320 Mb to 160 Mb - reboot did not fix the problem

uptime 3:06
Feb 13 11:03:27 r7800master user.err wsdd2[2325]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Feb 13 11:03:28 r7800master daemon.info mstpd[493]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 19
Feb 13 11:03:28 r7800master user.err wsdd2[2285]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum