Asus RT-AC5300

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4
Author Message
hachiroku
DD-WRT User


Joined: 30 Jan 2014
Posts: 53

PostPosted: Sat Sep 10, 2022 6:19    Post subject: Reply with quote
EDIT: i was able to get 9/3/2022 working without issue. i had to flash up from the older versions. it seems that one of the older versions had to be flashed to ensure newer versions would work without issue. i started with 12-30-2021-r47942 and began to flash up in version 2-3 months apart until i was able to reach 9/3/2022.

edit again:
version 09-03-2022-r50057 would freeze the router after about 10 minutes of running great. I'll have to spend the next few days figuring out which firmware works best without locking up the router completely.

---------------------


what firmware have you all been most successful with? I have tried a few and seem to have issues.

09-03-2022-r50057
-becomes unresponsive. GUI stops being accessible and all networking locks up

08-31-2022-r50012
-becomes unresponsive. GUI stops being accessible and all networking locks up

07-09-2022-r49467
-Not all wifi devices while connected are seeing internet access. some do and some don't. LAN devices can access the internet.

Firmware: DD-WRT v3.0-r49081 (06/04/22)
-Not all wifi devices while connected are seeing internet access. some do and some don't. LAN devices can access the internet.

Firmware: DD-WRT v3.0-r48414 (02/23/22)
-seems stable but networking seems slow, GUI continues to work, but not all wifi devices can connect as they show "connected but no internet"

Firmware: DD-WRT v3.0-r48255 (02/01/22)
-all wifi devices connect and internet works

asus_rt-ac5300-firmware 12-30-2021-r47942
-all wifi devices can connect and internet works

Firmware: DD-WRT v3.0-r44715 (11/03/20) - ORIGINAL RELEASE for AC5300
-all wifi devices can connect and internet works
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sat Sep 10, 2022 13:20    Post subject: Reply with quote
Please test builds only after webUI factory defaults or nvram erase && reboot manually reconfigure.
Also if you are using the experimental driver build from subfolder do not nvram set brcm_unlock=1.
Finally, do not use auto channel so please configure set or fix both radio channels so they are static.
hachiroku
DD-WRT User


Joined: 30 Jan 2014
Posts: 53

PostPosted: Sat Sep 10, 2022 17:27    Post subject: Reply with quote
thanks!

ya, I'm always clearing all settings and restoring defaults. never use auto channel either.

currently now on

Firmware: DD-WRT v3.0-r45219 (12/31/20)
Time: 19:25:07 up 4:31, load average: 0.00, 0.02, 0.00

and seems to be the most stable for me. 9/3/2022 ran great and fast for 10 minutes! then the router froze along with all networking. 12/30/2020 only seems to be using 2.4Ghz for connectivity though. all wireless devices are connecting to wl0 and nothing else. will be testing each version from there upward to figure out which is best for me.
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Sat Sep 10, 2022 18:11    Post subject: Reply with quote
hachiroku wrote:
Firmware: DD-WRT v3.0-r44715 (11/03/20) - ORIGINAL RELEASE for AC5300
-all wifi devices can connect and internet works

The original release was 27944, which was released after you first joined this forum:
Supported Devices Wiki wrote:
Code:
rt-ac5300
build 27944
20151009

I suspect your configuration to be faulty. Please post screenshots of your entire setup on the current release (50146). It is policy that we cannot support fixing previous releases or help you troubleshoot older releases. Thanks for understanding.

https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2022/09-10-2022-r50146/asus-rt-ac5300/

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
hachiroku
DD-WRT User


Joined: 30 Jan 2014
Posts: 53

PostPosted: Sat Sep 10, 2022 18:53    Post subject: Reply with quote
my postings are intended to identify a stable release not to fix past versions.

the firmware I pulled was from the database for router search and info page. thanks for sharing that it was not the first release.

it has been my experience with older hardware, there will be a break point where newer releases cause issues on older devices like system lock up. so I am looking to identify a stable release, new or old.

also, with my last experience with my Archer C9, there was a specific mid point release that needed to be flashed before loading of newer releases. that firmware package was a requirement to move forward as certain items were no longer being included with the newer firmwares and caused issues if they were missing. I'm hoping that isn't the case.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sat Sep 10, 2022 19:06    Post subject: Reply with quote
downloads/betas/2022/09-10-2022-r50146/asus-rt-ac5300/experimental_driver/

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1266785#1266772 Mile-Lile
hachiroku
DD-WRT User


Joined: 30 Jan 2014
Posts: 53

PostPosted: Sat Sep 10, 2022 23:55    Post subject: Reply with quote
thanks for the direction and help guys.

after spending about 6 hours today flashing and still running into issues with firmwares i ended up bricking my AC5300. don't seem to be able to get into recovery/rescue mode as i held the reset button for over 5 minutes in multiple attempts. i'll try again one more time but am stuck with only the power led.

regarding wifi settings i only did the very basic, WPK, AES128, 2.4Ghz N Only, 5Ghz AC Only. defined some static IP addresses and that is it. did not setup anything else. when the router locks up or freezes even the LAN locks up and all LEDs stay on and stop flashing.

what i can tell you is that...when i flash to specific older firmware then new firmware the wireless is called wlan0, wlan1, wlan2 after flashing the newest firmware like displayed on older firmware. when i flash up through the different releases in consecutive order in pretty broad jumps from a older flash to the latest firmware, wlan0/1/2 is renamed to wl0/wl1/wl2 so i'm clearly seeing specific firmwares effecting what is flashed next.

Firmware: DD-WRT v3.0-r45219 (12/31/20) was the only firmware that was stable for me although not the best in performance, it didn't lock up or freeze at all. i even flashed from 9/10/2022 firmware to Firmware: DD-WRT v3.0-r45219 (12/31/20) and it resolved my issue with all wifi devices only going to wl0 that i had last night. same network and wifi configuration.
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Sun Sep 11, 2022 0:38    Post subject: Reply with quote
Now we're seeing a small part of the picture; N-only and AC-only are not recommended settings...
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
muminovtm
DD-WRT Novice


Joined: 07 Jul 2023
Posts: 1

PostPosted: Fri Jul 07, 2023 18:37    Post subject: Reply with quote
hachiroku wrote:
version 09-03-2022-r50057 would freeze the router after about 10 minutes of running great.

I did trying:
48255 - not all clients be able to connect
49976 - Do not support VAP's, and really slow
52720 - all clients be able to connect, 27 min for now, works fine.

ASUS RT-AC5300
Goto page Previous  1, 2, 3, 4 Display posts from previous:    Page 4 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum