New Build - 02/06/2021 - r45690

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2779

PostPosted: Sat Feb 06, 2021 15:21    Post subject: New Build - 02/06/2021 - r45690 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45677 (GitHub mirror)

Notes:
OpenVPN version 2.5.0 and Guides
WireGuard 1.0.20200908/Tools: Guides, PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4.
In-kernel Samba (ksmbd 3.3.4): default min/max versions changed with WSD support, ANTFS & NTFS3 kernel mode drivers.
• Dnsmasq version 2.84 release with r45632 (2.83 at r45563, prerelease since r45036).

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with 40562-40566. Effective startup commands discussion thread is here.
If start-up scripts do not work from USB add a delay, e.g. wait script or 'sleep 25'.
Broadcom ARM devices missing 5GHz channels, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 175

PostPosted: Sat Feb 06, 2021 16:00    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45690 std (02/06/21)
Kernel: Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Mode: Gateway, Wireless AP.
Reset: Nope.
Previous: 02-04-2021-r45677
Status: Working so far.
Temperatures: CPU 55.2 °C / WL0 45.3 °C / WL1 50.7 °C



Logs.txt
 Description:
Full System Logs

Download
 Filename:  Logs.txt
 Filesize:  121.97 KB
 Downloaded:  22 Time(s)

Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Sat Feb 06, 2021 17:58    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45690 std (02/06/21)
Kernel Version: Linux 4.4.255 #1980 SMP Sat Feb 6 10:53:10 +06 2021 armv7l
Previous Version: DD-WRT v3.0-r45677 std (02/04/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: can access usb from internet explorer form Windows 7 computer hardwired to a lan port to the router. There is the message: this folder is empty. I cannot access the folder from the television; the message: No stored files found
Reset: no
Reboot: yes
Uptime: 8 min
Temperatures: CPU 48.0 °C
Errors: as reported in the syslog below

Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:20 DD-WRT user.err wsdd2[1218]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Feb 6 13:40:19 DD-WRT user.err wsdd2[1218]: Terminated received.
Feb 6 13:40:19 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: WARNING: child process exited abnormally: 1224
Feb 6 13:40:20 DD-WRT local5.err ksmbd: [ksmbd-worker/2261]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 6 13:40:20 DD-WRT local5.err ksmbd: [ksmbd-worker/2261]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 6 13:40:21 DD-WRT local5.err ksmbd: [ksmbd-manager/2397]: ERROR: Failed to create lock file: File exists

Reverting back to r45592
Having reverted it is working like a charm
download speed 52 mbps from 80 mbps
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 468

PostPosted: Sat Feb 06, 2021 19:15    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45690 std (02/06/21)
Kernel: Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Previous: r45677
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 32mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 67.5 °C / WL0 46.5 °C / WL1 52.5 °C
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 216

PostPosted: Sun Feb 07, 2021 1:24    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Previous/Reset: DD-WRT v3.0-r45677 std (02/04/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases: https://feed43.com/ddwrt-downloads.xml (unofficial)
easyddup - A simple upgrade/downgrade utility by yoyoma2
saphirely
DD-WRT Novice


Joined: 13 Dec 2020
Posts: 28

PostPosted: Sun Feb 07, 2021 15:02    Post subject: Reply with quote
Router/Version: Netgear R6250 v1
Firmware: DD-WRT v3.0-r45690 std (02/06/21)
Kernel: Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Mode: Gateway, Wireless AP
Reset: No
Previous:r45677

Upgrade: Web and 1st succeed without reset.

Load Average 1.22, 0.54, 0.21

Works well so far. CPU 75.8 °C / WL1 56 °C
if Administration Overclocking Frequency CPU chosn to 600MHZ instead of 800MHZ and reboot, CPU 75.8 °C / WL1 56 °C same!

DHCP Server: Enabled - Running (no need to dial-up like DSL, it is cable connection after modem)
Disable (Samba, WRT-radauth, WRT-rflow, MAC-upd,CIFS Automount, Sputnik Agent)

But if choose Recursive DNS Resolving (Unbound), it cannot be saved in status after booting?
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1035

PostPosted: Sun Feb 07, 2021 22:06    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r45690 std)
Kernel: Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Status: Working
Reset: No
Notes on configuration:

    Media Network
    DNSMasq
    Port Forwarding
    DHCP reservation
    DNSSEC

Errors:

    None
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 309
Location: Ottawa, Ontario, Canada

PostPosted: Mon Feb 08, 2021 14:39    Post subject: Reply with quote
Firmware: v3.0-r45690 std (02/06/21)
Router/Version: Netgear R7000
Kernel: Linux 4.4.255 #1972 SMP Fri Feb 5 20:52:38 +06 2021 armv7l
Previous: v3.0-r45677 std (02/04/21)
Mode/Status: AP wired and wireless, Up and running for 1.5 days.
Reset: Soft boot before and after upgrade
Temperatures: CPU 54.7 °C / WL0 43.8 °C / WL1 49.2 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

There is a mysterious "Sysctl" tab in the Administration tab that seems to allow a lot of fine-tuning. It is very tempting to change some of these just to see what happens. Wink

There is a minor issue with the packet count on wl0.1 and "Connected Clients" stuck at zero. The wl0 and wl1 counts seem correct.
Upload and Download speeds are to ISP spec. Nothing unexpected in the syslog.

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- SFE - On
- STP - On
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 149, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- NO: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- NO: UPnP, DMZ, QoS
- NO: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r46166 std (03/24/21)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 1
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 174
Location: Szczecin, Poland EU

PostPosted: Mon Feb 08, 2021 18:02    Post subject: New Build - 02/06/2021 - r45690 Reply with quote
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.255 #6673 Sat Feb 6 18:48:22 +06 2021 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: Feb 7 23:32:34 kern.warn kernel: br0: received packet on eth1 with own address as source address and more small warnings in logs.
Status: Working
Uptime: ~48h

Device is updated via ssh. I'm update it from previously beta (Feb 6, 2021). Router working rather good. I don't see any significant problem.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum