DD-WRT :: View topic - New Build - 01/31/2021

New Build - 01/31/2021 - r45632

DD-WRT Forum Index -> Broadcom SoC based Hardware

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 5700

Posted: Sun Jan 31, 2021 22:17 Post subject: New Build - 01/31/2021 - r45632

[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45592 (GitHub mirror)

Notes:
• OpenVPN version 2.5.0 and Guides
• WireGuard 1.0.20200908/Tools: Guides, PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• Broadcom MIPS devices are now on kernel 4.4.
• In-kernel Samba (ksmbd 3.3.3), default min/max versions changed, with WSD support and ANTFS kernel mode driver.
• Dnsmasq version 2.84 release with r45632 (2.83 at r45563, prerelease since r45036).

Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI, but v2 (not compatible) requires Golang and thus Entware. #6246
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at boot fixed for unbridged VAPs with 40562-40566. Effective startup commands discussion thread is here.
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• Broadcom ARM devices missing 5GHz channels, via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

flyzipper
DD-WRT Guru

Joined: 21 Feb 2016
Posts: 504

Posted: Mon Feb 01, 2021 0:30 Post subject:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r45632 std (01/31/21) Kernel: Linux 4.4.253 #1930 SMP Sat Jan 30 15:46:46 +07 2021 armv7l Previous: r45592 Mode/Status: Gateway / working Issues/Errors: Working well so far. Uptime: 12mins Upgrade: via web UI, no issues Reset: no Temperatures: CPU 67.5 °C / WL0 46.5 °C / WL1 52.6 °C

twindragon6
DD-WRT User

Joined: 29 Jun 2008
Posts: 332

Posted: Mon Feb 01, 2021 3:37 Post subject: Netgear Nighthawk R7000

Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45632 std (01/31/21)
Kernel: Linux 4.4.253 #1930 SMP Sat Jan 30 15:46:46 +07 2021 armv7l
Mode: Gateway, Wireless AP.
Reset: Nope.
Previous: 01-28-2021-r45592
Status: Working well so far.

Dnsmasq V2.84 Release is out.

http://www.thekelleys.org.uk/dnsmasq/dnsmasq-2.84.tar.xz

The version in the logs shown is 2.84rc2
with these build options:

compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset no-auth cryptohash DNSSEC loop-detect no-inotify no-dumpfile

Logs.txt

Description:

Full System Logs

Download

Filename:

Logs.txt

Filesize:

139.91 KB

Downloaded:

88 Time(s)

itwontbewe
DD-WRT User

Joined: 29 Sep 2020
Posts: 260
Location: United States

Posted: Mon Feb 01, 2021 11:04 Post subject:
Router: Netgear R7000P Kernel: Linux 4.4.253 #1936 SMP Sun Jan 31 07:03:25 GMT 2021 armv7l Previous/Reset: r45592 / no Mode/Status: Gateway AP Unbound JFFS2 static leases / ok Issues: running well thanks BrainSlayer and dd-wrt community Last edited by itwontbewe on Thu Feb 04, 2021 21:39; edited 1 time in total

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7492
Location: Dresden, Germany

Posted: Mon Feb 01, 2021 12:14 Post subject: Re: Netgear Nighthawk R7000

twindragon6 wrote:

2.84 is already integrated in this release. the published release by thekelleys.org just contains the wrong version information. its not a issue in my side. see 45651 change
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

twindragon6
DD-WRT User

Joined: 29 Jun 2008
Posts: 332

Posted: Mon Feb 01, 2021 12:58 Post subject: Re: Netgear Nighthawk R7000

BrainSlayer wrote:

2.84 is already integrated in this release. the published release by thekelleys.org just contains the wrong version information. its not a issue in my side. see 45651 change

Ahh, I see. Thanks BrainSlayer!

jrscs
DD-WRT User

Joined: 09 Aug 2010
Posts: 425

Posted: Mon Feb 01, 2021 14:02 Post subject:

Router/Version: RT-AC87U A1
Firmware: DD-WRT v3.0-r45632 std (01/31/21)
Kernel: Linux 4.4.253 #1938 SMP Sun Jan 31 07:15:55 GMT 2021 armv7l
Previous: DD-WRT v3.0-r45592 std (01/28/21))
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, NTP TimeSync, PPTP, and Wake-on-WAN (internet)
Issues/Errors: Yes, PPTP will not connect from the Internet (WAN) to the PPTP server, but will connect from the LAN. Not sure which release this started as it’s seldom used. Below is the syslog output when it fails to connect from the WAN.

Syslog:
Feb 1 06:30:21 Idaho daemon.info pptpd[1783]: CTRL: Client 65.102.xxx.xxx control connection started
Feb 1 06:30:21 Idaho daemon.info pptpd[1783]: CTRL: Starting call (launching pppd, opening GRE)
Feb 1 06:30:21 Idaho daemon.notice pppd[1784]: pppd 2.4.8 started by root, uid 0
Feb 1 06:30:21 Idaho daemon.debug pppd[1784]: using channel 1
Feb 1 06:30:21 Idaho daemon.info pppd[1784]: Using interface ppp0
Feb 1 06:30:21 Idaho daemon.notice pppd[1784]: Connect: ppp0 <--> /dev/pts/0
Feb 1 06:30:21 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:24 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:27 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:30 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:33 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:36 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:39 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:42 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:45 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:48 Idaho daemon.debug pppd[1784]: sent [LCP ConfReq id=0x1 ]
Feb 1 06:30:51 Idaho daemon.warn pppd[1784]: LCP: timeout sending Config-Requests
Feb 1 06:30:51 Idaho daemon.notice pppd[1784]: Connection terminated.
Feb 1 06:30:51 Idaho daemon.notice pppd[1784]: Modem hangup
Feb 1 06:30:51 Idaho daemon.info pppd[1784]: Exit.
Feb 1 06:30:51 Idaho daemon.err pptpd[1783]: GRE: read(fd=6,buffer=26470,len=8196) from PTY failed: status = -1 error = I/O error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Feb 1 06:30:51 Idaho daemon.err pptpd[1783]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Feb 1 06:30:51 Idaho daemon.debug pptpd[1783]: CTRL: Reaping child PPP[1784]
Feb 1 06:30:51 Idaho daemon.info pptpd[1783]: CTRL: Client 65.102.xx.xxx control connection finished
_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp

dwardo
DD-WRT User

Joined: 07 Feb 2013
Posts: 126
Location: France

Posted: Mon Feb 01, 2021 19:32 Post subject:
Router/Version: TP-Link Archer C9 v1 File/Kernel: archer-c9v1-webflash.bin/Linux 4.4.253 #1932 SMP Sun Jan 31 06:40:33 GMT 2021 armv7l Previous/Reset: r45592/no Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding/ipv4 & ipv6 Issues/Errors: None

BrainSlayer
Site Admin

Joined: 06 Jun 2006
Posts: 7492
Location: Dresden, Germany

Posted: Tue Feb 02, 2021 16:26 Post subject:

jrscs wrote:

check if sfe is enabled and more important. check if "filter wan nat redirection" enabled / disabled. try to play with these
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s

IONK
DD-WRT Guru

Joined: 19 Aug 2011
Posts: 967

Posted: Tue Feb 02, 2021 16:33 Post subject:

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.253 #1930 SMP Sat Jan 30 15:46:46 +07 2021 armv7l
Previous/Reset: DD-WRT v3.0-r45592 std (01/28/21) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
▫ easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)

jrscs
DD-WRT User

Joined: 09 Aug 2010
Posts: 425

Posted: Tue Feb 02, 2021 17:10 Post subject:

BrainSlayer wrote:

check if sfe is enabled and more important. check if "filter wan nat redirection" enabled / disabled. try to play with these

SFE & filter WAN NAT redirection: both on, both off, one on the other off (save, apply, reboot between settings) could not find a solution that worked...but thanks for the suggestion and idea
_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp

Abboo
DD-WRT User

Joined: 03 Apr 2016
Posts: 175

Posted: Tue Feb 02, 2021 23:16 Post subject:

Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45632 std (01/31/21)
Kernel Version: Linux 4.4.253 #1938 SMP Sun Jan 31 07:15:55 GMT 2021 armv7l
Previous Version: DD-WRT v3.0-r45592 std (01/28/21)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Reboot: no
Uptime: 1 day, 17 min
Temperatures: CPU 46.9 °C
Errors: as reported in the syslog below

Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1183]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:20 DD-WRT local5.err ksmbd: [ksmbd-worker/1183]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:20 DD-WRT user.err wsdd2[1176]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Feb 1 18:49:09 DD-WRT user.err wsdd2[1176]: Terminated received.
Feb 1 18:49:10 DD-WRT local5.err ksmbd: [ksmbd-worker/2228]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Feb 1 18:49:10 DD-WRT local5.err ksmbd: [ksmbd-worker/2228]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Feb 1 18:49:13 DD-WRT local5.err ksmbd: [ksmbd-manager/2508]: ERROR: Failed to create lock file: File exists
Feb 2 19:04:54 DD-WRT daemon.err httpd[1411]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases

Display posts from previous:

Page 1 of 1

DD-WRT Forum Index -> Broadcom SoC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum

Log in

New Build - 01/31/2021 - r45632

Quick Links

Log in