Tuya smart sockets do not work with DDWRT?

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
Author Message
baxtex
DD-WRT User


Joined: 30 Dec 2014
Posts: 79

PostPosted: Sun Jan 24, 2021 10:22    Post subject: Tuya smart sockets do not work with DDWRT? Reply with quote
Do anyone have smart sockets that are Tuya based? I cannot seem to get them detected in the app even though they are connected to my DDWRT router. I have read some reports that turning off WMM might work but it does not seem to work for me. I have also tried setting up a VAP but its the same thing there. Are there any settings I should be aware of?
Sponsor
scope2
DD-WRT User


Joined: 12 Jul 2017
Posts: 181

PostPosted: Sun Jan 24, 2021 15:26    Post subject: Re: Tuya smart sockets do not work with DDWRT? Reply with quote
baxtex wrote:
Do anyone have smart sockets that are Tuya based? I cannot seem to get them detected in the app even though they are connected to my DDWRT router. I have read some reports that turning off WMM might work but it does not seem to work for me. I have also tried setting up a VAP but its the same thing there. Are there any settings I should be aware of?


I've got a few, no problems at all. Just make sure they are able to connect to the 2.4ghz wifi, they dont work on 5ghz.
jose_rui_sa
DD-WRT Novice


Joined: 24 Apr 2012
Posts: 33

PostPosted: Mon Jun 28, 2021 13:06    Post subject: Reply with quote
i have problems too... but im trying to connect a gateway by cable... and wait 2 minuts to finish the "paring" and app says time exceed


tuya support not helping
mwbuss8
DD-WRT Guru


Joined: 23 Feb 2015
Posts: 751

PostPosted: Fri Jul 02, 2021 5:57    Post subject: Reply with quote
I have several tuya devices. I find EZ Mode setup rarely works. If you haven't tried already, switch to app mode for setup. I've run into similar issues with other brands as well.
jose_rui_sa
DD-WRT Novice


Joined: 24 Apr 2012
Posts: 33

PostPosted: Fri Jul 02, 2021 9:41    Post subject: Reply with quote
Ok. Will try thanks
jose_rui_sa
DD-WRT Novice


Joined: 24 Apr 2012
Posts: 33

PostPosted: Fri Jul 30, 2021 9:36    Post subject: Reply with quote
dont have such "mode"
TCB13
DD-WRT User


Joined: 06 Jun 2010
Posts: 260
Location: Portugal

PostPosted: Fri Jul 30, 2021 10:27    Post subject: Reply with quote
Hi,

I'm also trying to setup a Tuya Zemismart Gateway TZ01 (https://pt.aliexpress.com/i/1005002033179841.html) under a R7000 running DD-WRT v3.0-r47000.

The device is connected over ethernet and as described the phone app always reports "time exceed" after a few minutes. Interestingly the same device works just fine with the same phone and a standard ISP router.

- Enabled UPnP > doesn't work
- Changed DNS to ISP provided servers > doesn't work
- Changed DNS to 1.1.1.1 > doesn't work

The device doesn't seem to be trying to do anything, no connections:



The phone does some DNS queries before the timeout such as:



I tried to manually resolve those records with dig and I got results.

Any ideas? Thank you.

_________________
1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Sat Jul 31, 2021 15:19    Post subject: Reply with quote
I have 3x2 different types that work with the Tuya app. I have them connected to a VAP where WMM Support is disabled. They will not connect if WMM Support is enabled.
_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
TCB13
DD-WRT User


Joined: 06 Jun 2010
Posts: 260
Location: Portugal

PostPosted: Sat Jul 31, 2021 15:26    Post subject: Reply with quote
plawer wrote:
I have 3x2 different types that work with the Tuya app. I have them connected to a VAP where WMM Support is disabled. They will not connect if WMM Support is enabled.


Interesting but in my case I'm trying to connect an Ethernet Zigbee gateway so no Wifi involved.

Did you change any other setting your router such as UPNP, Multicast filtering etc in order for your devices to work?

Thank you.

_________________
1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Sat Jul 31, 2021 15:37    Post subject: Reply with quote
UPNP is disabled. Multicast Filter is enabled. The only thing that changed my ability to connect the outlets to wifi was the WMM setting.
_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
jose_rui_sa
DD-WRT Novice


Joined: 24 Apr 2012
Posts: 33

PostPosted: Tue Aug 03, 2021 16:23    Post subject: Reply with quote
hi there

Tuya notify me for a new update and fix it.... both versions (two same devices) start working

dont know the the different versions....

Using iPhone


[/img]



Captura de ecrã 2021-08-03, às 17.20.46.png
 Description:
 Filesize:  92.56 KB
 Viewed:  2958 Time(s)

Captura de ecrã 2021-08-03, às 17.20.46.png



Captura de ecrã 2021-08-03, às 17.20.53.png
 Description:
 Filesize:  87.85 KB
 Viewed:  2958 Time(s)

Captura de ecrã 2021-08-03, às 17.20.53.png


Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum