Posted: Fri Dec 25, 2020 11:21 Post subject: New Build - 12/25/2020 - r45109
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Joined: 29 Sep 2020 Posts: 260 Location: United States
Posted: Fri Dec 25, 2020 17:20 Post subject:
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.248 #1632 SMP Fri Dec 25 10:01:25 +07 2020 armv7l
Previous/Reset: r45073 / nvram erase && reboot
Mode/Status: Gateway AP 2.4 GHz AP 5 GHz Unbound USB / working
Issues/Errors: known
Status/LAN
Active Clients
no stats now
Last edited by itwontbewe on Wed Jan 13, 2021 18:24; edited 2 times in total
Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:21 folio local5.err ksmbd: [ksmbd-manager/1209]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Jan 1 02:00:21 folio user.err wsdd2[1206]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 26 11:30:52 folio user.err wsdd2[1206]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 26 11:30:53 folio user.err wsdd2[1206]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Dec 26 11:30:53 folio user.err wsdd2[1206]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Dec 26 11:31:11 folio user.err wsdd2[1206]: Terminated received.
Dec 26 11:31:11 folio local5.err ksmbd: [ksmbd-manager/1209]: ERROR: WARNING: child process exited abnormally: 1210
Dec 26 11:31:14 folio local5.err ksmbd: [ksmbd-manager/2448]: ERROR: Failed to create lock file: File exists
Dec 26 11:31:14 folio local5.err ksmbd: [ksmbd-manager/2509]: ERROR: Failed to create lock file: File exists
Dec 26 12:18:11 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:17:32 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:17:32 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:35:12 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:36:25 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:06:38 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:08:12 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:15:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:03 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:58 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:59 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:59 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:01 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:01 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:17 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:26:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:29:27 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:07 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:07 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:14 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:14 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:16 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:56 folio daemon.err httpd[1983]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Dec 26 14:42:37 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:37 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:43 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:43 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45109 std (12/25/20)
Kernel Version: Linux 4.4.248 #1634 SMP Fri Dec 25 10:13:11 +07 2020 armv7l
Previous Version: DD-WRT v3.0-r45073 std (12/21/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 22:03
Errors: as reported in the syslog below
Dec 31 20:00:19 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 25 12:40:56 DD-WRT user.err wsdd2[1217]: Terminated received.
Dec 25 12:40:56 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: WARNING: child process exited abnormally: 1224
Dec 25 12:40:59 DD-WRT local5.err ksmbd: [ksmbd-manager/2515]: ERROR: Failed to create lock file: File exists
Dec 26 10:39:43 DD-WRT daemon.err httpd[1396]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45109 std (12/25/20)
Kernel Version: Linux 4.4.248 #1634 SMP Fri Dec 25 10:13:11 +07 2020 armv7l
Previous Version: DD-WRT v3.0-r45073 std (12/21/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 22:03
Errors: as reported in the syslog below
Dec 31 20:00:19 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 25 12:40:56 DD-WRT user.err wsdd2[1217]: Terminated received.
Dec 25 12:40:56 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: WARNING: child process exited abnormally: 1224
Dec 25 12:40:59 DD-WRT local5.err ksmbd: [ksmbd-manager/2515]: ERROR: Failed to create lock file: File exists
Dec 26 10:39:43 DD-WRT daemon.err httpd[1396]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Posted: Sat Dec 26, 2020 16:28 Post subject: WRT54GSv1 WNDR4500v2 RT-N66R
Router/Version: RT-N66R
Mode: Gateway
File: dd-wrt.v24-45109_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.248 #5649 Fri Dec 25 15:50:03 +07 2020 mips
Status: 256Mb RAM is displayed and so far working well
Uptime: 18 min
Temps: WL0 53.0 °C / WL1 51.3 °C
Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-45109_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.248 #5637 Fri Dec 25 15:34:38 +07 2020 mips
Status: Working
Uptime: 30min
Temps: WL0 44.6 °C / WL1 46.7 °C
Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 45109
Kernel: Linux 2.4.37 #63162 Thu Dec 17 09:38:43 +07 2020 mips
Status: Error - Incorrect build (45036)displayed flashed from 45109 broadcom folder
Uptime: 34 min
The WRT54GSv1 has been flashed from WebUI and CLi without getting the new build and Linux version applied. Flashing from the CLi shows one error at the start of the flash "free memory is not enough" but flashing from WebUI shows "The free memory is enough, writing image once." I haven't tried the other build editions (micro or special for example) to see if they show the same issue. _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
Router/Version: Dlink 890L
Status: Working
Uptime: 8hr
I noticed few issues:
1) I have a set up for guest network, the definition of the dhcpd is missing under networking
2) I have new features disabled but still see the speed checker under services.
Except this looks like the version is stable for me. _________________ Netgear R9000 main router
RAX80 as AP
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sun Dec 27, 2020 12:07 Post subject: New Build - 12/25/2020 - r45109
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.248 #5637 Fri Dec 25 15:34:38 +07 2020 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: Tab Status -> Lan -> Active clients stats information is still 0
Status: Working
Uptime: ~45h
Device working good generally. I'm update it via ssh. I don't see any significant problems.
Posted: Mon Jan 18, 2021 22:56 Post subject: AC1450 traffic stops after a couple of days
I have 2 Netgear AC1450s that I've tried on the 45109 build, both hang when configured as the gateway after a couple of days of use. Used as a router (not gateway) elsewhere in the network seems to be ok. Was using a WNDR4300 (dd-wrt 40559) as gateway without incident.