New Build - 12/25/2020 - r45109

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3155

PostPosted: Fri Dec 25, 2020 11:21    Post subject: New Build - 12/25/2020 - r45109 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


WireGuard users read this first!

Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45073 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 144

PostPosted: Fri Dec 25, 2020 17:20    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.248 #1632 SMP Fri Dec 25 10:01:25 +07 2020 armv7l
Previous/Reset: r45073 / nvram erase && reboot
Mode/Status: Gateway AP 2.4 GHz AP 5 GHz Unbound USB / working
Issues/Errors: known
Status/LAN
Active Clients
no stats now


Last edited by itwontbewe on Wed Jan 13, 2021 18:24; edited 2 times in total
turmoil77
DD-WRT Novice


Joined: 06 Jan 2013
Posts: 10

PostPosted: Fri Dec 25, 2020 17:46    Post subject: Reply with quote
itwontbewe wrote:

Status/LAN
Active Clients
no stats now



Does offline/idle or inative clients continues on table?
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 144

PostPosted: Fri Dec 25, 2020 18:19    Post subject: Reply with quote
yeah they still stay in the active clients too
flyzipper
DD-WRT Guru


Joined: 21 Feb 2016
Posts: 504

PostPosted: Fri Dec 25, 2020 20:40    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45109 std (12/25/20)
Kernel: Linux 4.4.248 #1626 SMP Thu Dec 24 15:43:15 +07 2020 armv7l
Previous: r45073
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 3hrs 7mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.4 °C / WL0 46.0 °C / WL1 52.0 °C

Special notes: Merry Christmas all!
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 320

PostPosted: Sat Dec 26, 2020 6:14    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.248 #1626 SMP Thu Dec 24 15:43:15 +07 2020 armv7l
Previous/Reset: DD-WRT v3.0-r45073 std (12/21/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none

EDIT: there is Sysctl tab under Administration (/Sysctl.asp), not sure if this is intended.
syslog attached.



266.jpg
 Description:
/Sysctl.asp
 Filesize:  33.83 KB
 Viewed:  2032 Time(s)

266.jpg



syslog.txt
 Description:

Download
 Filename:  syslog.txt
 Filesize:  8.11 KB
 Downloaded:  47 Time(s)



Last edited by IONK on Sat Dec 26, 2020 14:24; edited 5 times in total
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 70
Location: Ukraine

PostPosted: Sat Dec 26, 2020 12:45    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
Mode: Gateway/AP
Firmware: DD-WRT v3.0-r45109 std (12/25/20)
Kernel: Linux 4.4.248 #1626 SMP Thu Dec 24 15:43:15 +07 2020 armv7l
Previous: DD-WRT v3.0-r45073 std (12/21/20)
Reset: No.
Issues/Errors: Syslog is below.

Syslog:

Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 folio daemon.info mstpd[684]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 folio daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:21 folio local5.err ksmbd: [ksmbd-manager/1209]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Jan 1 02:00:21 folio user.err wsdd2[1206]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 26 11:30:52 folio user.err wsdd2[1206]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 26 11:30:53 folio user.err wsdd2[1206]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Dec 26 11:30:53 folio user.err wsdd2[1206]: error: llmnr-tcp-v6: open_ep: SO_BINDTODEVICE
Dec 26 11:31:11 folio user.err wsdd2[1206]: Terminated received.
Dec 26 11:31:11 folio local5.err ksmbd: [ksmbd-manager/1209]: ERROR: WARNING: child process exited abnormally: 1210
Dec 26 11:31:14 folio local5.err ksmbd: [ksmbd-manager/2448]: ERROR: Failed to create lock file: File exists
Dec 26 11:31:14 folio local5.err ksmbd: [ksmbd-manager/2509]: ERROR: Failed to create lock file: File exists
Dec 26 12:18:11 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:17:32 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:17:32 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:35:12 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 13:36:25 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:06:38 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:08:12 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:15:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:03 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:47 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:58 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:59 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:18:59 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:00 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:01 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:01 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:19:17 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:26:46 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:29:27 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:07 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:07 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:14 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:14 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:16 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:41:56 folio daemon.err httpd[1983]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Dec 26 14:42:37 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:37 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:43 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Dec 26 14:42:43 folio daemon.err dnsmasq[1776]: failed to send packet: Address family not supported by protocol
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 171

PostPosted: Sat Dec 26, 2020 14:54    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45109 std (12/25/20)
Kernel Version: Linux 4.4.248 #1634 SMP Fri Dec 25 10:13:11 +07 2020 armv7l
Previous Version: DD-WRT v3.0-r45073 std (12/21/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 22:03
Errors: as reported in the syslog below

Dec 31 20:00:19 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 25 12:40:56 DD-WRT user.err wsdd2[1217]: Terminated received.
Dec 25 12:40:56 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: WARNING: child process exited abnormally: 1224
Dec 25 12:40:59 DD-WRT local5.err ksmbd: [ksmbd-manager/2515]: ERROR: Failed to create lock file: File exists
Dec 26 10:39:43 DD-WRT daemon.err httpd[1396]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 171

PostPosted: Sat Dec 26, 2020 14:56    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45109 std (12/25/20)
Kernel Version: Linux 4.4.248 #1634 SMP Fri Dec 25 10:13:11 +07 2020 armv7l
Previous Version: DD-WRT v3.0-r45073 std (12/21/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 22:03
Errors: as reported in the syslog below

Dec 31 20:00:19 DD-WRT user.err wsdd2[1217]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1224]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 25 12:40:56 DD-WRT user.err wsdd2[1217]: Terminated received.
Dec 25 12:40:56 DD-WRT local5.err ksmbd: [ksmbd-manager/1223]: ERROR: WARNING: child process exited abnormally: 1224
Dec 25 12:40:59 DD-WRT local5.err ksmbd: [ksmbd-manager/2515]: ERROR: Failed to create lock file: File exists
Dec 26 10:39:43 DD-WRT daemon.err httpd[1396]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 191

PostPosted: Sat Dec 26, 2020 16:28    Post subject: WRT54GSv1 WNDR4500v2 RT-N66R Reply with quote
Router/Version: RT-N66R
Mode: Gateway
File: dd-wrt.v24-45109_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.248 #5649 Fri Dec 25 15:50:03 +07 2020 mips
Status: 256Mb RAM is displayed and so far working well
Uptime: 18 min
Temps: WL0 53.0 °C / WL1 51.3 °C

Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-45109_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.248 #5637 Fri Dec 25 15:34:38 +07 2020 mips
Status: Working
Uptime: 30min
Temps: WL0 44.6 °C / WL1 46.7 °C

Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 45109
Kernel: Linux 2.4.37 #63162 Thu Dec 17 09:38:43 +07 2020 mips
Status: Error - Incorrect build (45036)displayed flashed from 45109 broadcom folder
Uptime: 34 min

The WRT54GSv1 has been flashed from WebUI and CLi without getting the new build and Linux version applied. Flashing from the CLi shows one error at the start of the flash "free memory is not enough" but flashing from WebUI shows "The free memory is enough, writing image once." I haven't tried the other build editions (micro or special for example) to see if they show the same issue.

_________________
Asus RT-N66R 45229 big
Netgear WNDR4500v2 45229 mega
Linksys WRT-54GSv1 45229 std
blaser
DD-WRT Guru


Joined: 16 Jul 2006
Posts: 519

PostPosted: Sat Dec 26, 2020 17:20    Post subject: Reply with quote
Router/Version: Dlink 890L
Status: Working
Uptime: 8hr

I noticed few issues:
1) I have a set up for guest network, the definition of the dhcpd is missing under networking
2) I have new features disabled but still see the speed checker under services.

Except this looks like the version is stable for me.

_________________
Netgear R9000 main router
RAX80 as AP
falcon111
DD-WRT User


Joined: 22 Feb 2014
Posts: 74

PostPosted: Sat Dec 26, 2020 18:01    Post subject: Reply with quote
blaser wrote:

1) I have a set up for guest network, the definition of the dhcpd is missing under networking

@45124 brainslayer fix missing mdhcp
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 144

PostPosted: Sat Dec 26, 2020 18:07    Post subject: Reply with quote
https://svn.dd-wrt.com/changeset/45124
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 223
Location: Szczecin, Poland EU

PostPosted: Sun Dec 27, 2020 12:07    Post subject: New Build - 12/25/2020 - r45109 Reply with quote
Router: Netgear WNR3500L v2
Kernel: Linux 4.4.248 #5637 Fri Dec 25 15:34:38 +07 2020 mips
Reset: No
Mode: Internet gateway, WIFI AP, Dnsmasq server
Errors: Tab Status -> Lan -> Active clients stats information is still 0
Status: Working
Uptime: ~45h

Device working good generally. I'm update it via ssh. I don't see any significant problems.
jeffjohnson123
DD-WRT Novice


Joined: 02 Oct 2017
Posts: 2

PostPosted: Mon Jan 18, 2021 22:56    Post subject: AC1450 traffic stops after a couple of days Reply with quote
I have 2 Netgear AC1450s that I've tried on the 45109 build, both hang when configured as the gateway after a couple of days of use. Used as a router (not gateway) elsewhere in the network seems to be ok. Was using a WNDR4300 (dd-wrt 40559) as gateway without incident.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum