Posted: Thu Dec 31, 2020 12:54 Post subject: New Build - 12/31/2020 - r45219
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Upgraded WRT1200AC v1's from r45073 to r45219 using Brave Version 1.10.97 (64-bit) running on Linux Mint 20 OS hardwired via Cat6.
Successful update and reboot. No reset, nothing disabled prior to update, up time approx 1 hr, wired/wireless connected, vpn up immediately (Expressvpn). I do not use NAS. SFE and IPv6 are always disabled. OpenVPN client/DNSMasq, QoS with PIE always enabled. I do not have any Apple devices.
Kernel Version Linux 4.9.248 #2288 SMP Thu Dec 31 01:30:29 +07 2020 armv7l
No issues with all devices and phones connected to wireless. GUI issues are gone for me, all tabs working with no detected problems. Seems very quick on GUI / Browser response.
Posted: Thu Dec 31, 2020 21:46 Post subject: Services->USB
Linksys WRT1900AC v1 - upgraded from factory to r45219 today but did not have the USB tab under the Services tab. Tried flashing r44048 but still no USB options. In searching the forums it looked like others had these options on r44048. Has USB support been removed?
Currently:
Firmware VersionDD-WRT v3.0-r44048 (08/02/20)
Kernel VersionLinux 4.9.231 #1980 SMP Sun Aug 2 03:46:09 +03 2020 armv7l
Posted: Thu Dec 31, 2020 23:51 Post subject: Re: Services->USB
BlueWalleye wrote:
Linksys WRT1900AC v1 - upgraded from factory to r45219 today but did not have the USB tab under the Services tab. Tried flashing r44048 but still no USB options. In searching the forums it looked like others had these options on r44048. Has USB support been removed?
Currently:
Firmware VersionDD-WRT v3.0-r44048 (08/02/20)
Kernel VersionLinux 4.9.231 #1980 SMP Sun Aug 2 03:46:09 +03 2020 armv7l
It's present for me (and functional, I have YAMon and optware both installed).
Posted: Tue Jan 05, 2021 16:30 Post subject: No issues atm
I'll comment what I did to have this version stable.
You will have to save all your settings before following any of this steps, just to prevent any lost.
1️⃣what I did was, from a previous version of r44048 I disable the antenna 2, and upgrade to this version from web GUI no reset.
2️⃣After upgrading to this version and setting up all my settings if any has changed I continue upgrading the next version.
3️⃣Upgrade (from GUI with reset settings) to r45192, I've to setup account and password and save my settings again, I saw the wlan2 come back to the Wireless Tab, the antenna is disable
4️⃣Then I upgrade to this version from web GUI no reset. I can access all settings no issues.
Now, I don't know if I did anything wrong from r44048 to r45192, but without reset settings I couldn't see the Wireless tab correctly.
My router if on my signature if you ask which router model I own. _________________ Linksys WRT3200ACM
CPU: Marvell Armada 385 / Features: VFP VFPv3 NEON VFPD32 EDSP
1866 MHz
2 Cores
Posted: Tue Jan 05, 2021 22:20 Post subject: Re: Unable to copy file from NAS
tom2tom wrote:
Linksys WRT 1900AC V1 - Upgraded from r44048 -> r45219
No reset, started up OK. No major issues.
Issue:
1. Issue is whilst copying files from NAS.
Receive error 0x8007003A (Refer attachment)
Does anyone know why is this error?
2. WAN access for ftp isn't working, LAN access is working fine
Both these issues doesn't occur whilst using r44048.
I'm also getting this error (0x8007003A on Win10 computer) when attempting to copy files from NAS (USB flash drive). This didn't happen with previous firmware (41892).
Router/Version: Netgear R7000/DD-WRT v3.0-r45073 std (12/21/20)
Posted: Thu Feb 04, 2021 15:08 Post subject: Re: Unable to copy file from NAS
jimbehr wrote:
tom2tom wrote:
Linksys WRT 1900AC V1 - Upgraded from r44048 -> r45219
No reset, started up OK. No major issues.
Issue:
1. Issue is whilst copying files from NAS.
Receive error 0x8007003A (Refer attachment)
Does anyone know why is this error?
2. WAN access for ftp isn't working, LAN access is working fine
Both these issues doesn't occur whilst using r44048.
I'm also getting this error (0x8007003A on Win10 computer) when attempting to copy files from NAS (USB flash drive). This didn't happen with previous firmware (41892).
Router/Version: Netgear R7000/DD-WRT v3.0-r45073 std (12/21/20)
Try to change the smb Maximum Protocol Version from 3.x to 2.10, it should works fine. Or update to r45667 and use smb Maximum Protocol Version 3.11(new smb version in this update).