New Build - 12-21-2020-r45073

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8464
Location: Texas, USA

PostPosted: Mon Dec 21, 2020 23:09    Post subject: New Build - 12-21-2020-r45073 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


WireGuard users read this first



Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r45036 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
• OpenVPN Version 2.5.0

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 123

PostPosted: Mon Dec 21, 2020 23:17    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.248 #1608 SMP Mon Dec 21 15:52:35 +07 2020 armv7l
Previous/Reset: r45036 / no
Mode/Status: Gateway [AP 2.4GHz] [AP 5GHz] Unbound USB / working
Issues/Errors: known


Last edited by itwontbewe on Wed Jan 13, 2021 18:24; edited 1 time in total
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 471

PostPosted: Mon Dec 21, 2020 23:59    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r45073 std (12/21/20)
Kernel: Linux 4.4.248 #1602 SMP Sun Dec 20 10:16:32 +07 2020 armv7l
Previous: r45036
Mode/Status: Gateway / working
Issues/Errors: Working well so far.

Uptime: 2hrs 10mins
Upgrade: via web UI, no issues
Reset: no
Temperatures: CPU 66.9 °C / WL0 46.4 °C / WL1 52.2 °C
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7471
Location: Netherlands

PostPosted: Tue Dec 22, 2020 15:49    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r45073 Community Build (12/22/20)
Kernel Version: Linux 4.4.248 #1 SMP Tue Dec 22 11:00:40 CET 2020 armv7l

Upgraded from: DD-WRT v3.0-r44980 std (12/12/20)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, DynDNS, 2.4 GHz and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
Errors: No

Big Thanks to the devs

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Wed Dec 23, 2020 1:45    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r45073 std (12/21/20)
Kernel Version: Linux 4.4.248 #1610 SMP Mon Dec 21 16:03:56 +07 2020 armv7l
Previous Version: DD-WRT v3.0-r45036 std (12/18/20)
Drivers: Experimental
Services: samba, wireguard client, openvpn client, dhcp, wifi 2.4 ghz, usb, nas
Status: working
Updated: via webgui
Mode: AP/gateway
Issues: none
Reset: no
Uptime: 1 day, 22 min
Errors: as reported in the syslog below

Dec 31 20:00:19 DD-WRT user.err wsdd2[1180]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1200]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1200]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 21 21:25:26 DD-WRT user.err wsdd2[1180]: Terminated received.
Dec 21 21:25:28 DD-WRT local5.err ksmbd: [ksmbd-worker/2016]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 21 21:25:28 DD-WRT local5.err ksmbd: [ksmbd-worker/2016]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 21 21:25:30 DD-WRT local5.err ksmbd: [ksmbd-manager/2294]: ERROR: Failed to create lock file: File exists
Dec 22 07:42:47 DD-WRT daemon.err httpd[1312]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
falcon111
DD-WRT User


Joined: 22 Feb 2014
Posts: 74

PostPosted: Wed Dec 23, 2020 12:58    Post subject: After settings reset unable to set Multiple DHCPD option Reply with quote
Router Model: ASUS RT-AC68U
Firmware Version: DD-WRT v3.0-r45073 std (12/21/20)
Previous Version: 44863
Status: Guest network won't give IPs
Updated: via webgui
Reset: Yes

After settings reset and setting everithing up back again, i'm unable to set dhcp for wl0.1
Is there any way to make missing "multiple dhcpd" block to appear in settings? Or i'll have to revert back to 44863 ?



45073_0x25.png
 Description:
45073 have no Multiple DHCP option
 Filesize:  67.77 KB
 Viewed:  1923 Time(s)

45073_0x25.png


egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 7471
Location: Netherlands

PostPosted: Wed Dec 23, 2020 13:25    Post subject: Reply with quote
I just checked could be a bug Sad
_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
WireGuard Documents & Guides:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327397
OpenVPN Documents & Guides: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327398
IPSET: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=327261
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 84
Location: France

PostPosted: Wed Dec 23, 2020 15:46    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.248 #1604 SMP Mon Dec 21 15:31:53 +07 2020 armv7l
Previous/Reset: r45036/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding
Issues/Errors: None
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 123

PostPosted: Wed Dec 23, 2020 22:33    Post subject: Reply with quote
Status/LAN
Active Clients

disconnected devices remain until lease time expires
technoside2
DD-WRT User


Joined: 25 Oct 2018
Posts: 64

PostPosted: Thu Dec 24, 2020 0:13    Post subject: EA6350 V2 Reply with quote
Router/Version: Linksys EA6350 v2
File: linksys-ea6350-webflash.bin
Firmware: DD-WRT v3.0-r45073 std (12/21/20)
Kernel: Linux 4.4.248 #1602 SMP Sun Dec 20 10:16:32 +07 2020 armv7l
Mode: Router/Client
Reset?: N
Status: Working

_________________
WRT54GL v1.1 - Flashed
Linksys WRT54G2 v1 - Flashed
EA6350 v2 - Flashed
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 226

PostPosted: Thu Dec 24, 2020 3:12    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.248 #1602 SMP Sun Dec 20 10:16:32 +07 2020 armv7l
Previous/Reset: DD-WRT v3.0-r45036 std (12/18/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
turmoil77
DD-WRT Novice


Joined: 06 Jan 2013
Posts: 8

PostPosted: Thu Dec 24, 2020 4:05    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v2
File/Kernel: Linux 4.4.248 #1604 SMP Mon Dec 21 15:31:53 +07 2020 armv7l
Previous/Reset: r43055/no
Mode/Status: Gateway/2.4GHz & 5GHz AP, Port forwarding, QOS (htb/cake)
Issues/Errors: on (tab status), (active clients) that disconnects( poweroff) continues on table entries.
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 66
Location: Ukraine

PostPosted: Thu Dec 24, 2020 9:05    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
Mode: Gateway/AP
Firmware: DD-WRT v3.0-r45073 std (12/21/20)
Kernel: Linux 4.4.248 #1602 SMP Sun Dec 20 10:16:32 +07 2020 armv7l
Previous: DD-WRT v3.0-r45036 std (12/18/20)
Reset: No.
Issues/Errors: Working.

Flashed from GUI. Syslog is below.

Jan 1 02:00:11 Linksys daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 Linksys daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:11 Linksys daemon.info mstpd[684]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 Linksys daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 Linksys daemon.info mstpd[684]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:22 Linksys local5.err ksmbd: [ksmbd-manager/1241]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Jan 1 02:00:22 Linksys user.err wsdd2[1238]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 24 09:08:16 Linksys user.err wsdd2[1238]: Terminated received.
Dec 24 09:08:16 Linksys local5.err ksmbd: [ksmbd-manager/1241]: ERROR: WARNING: child process exited abnormally: 1242
Dec 24 09:08:20 Linksys local5.err ksmbd: [ksmbd-manager/1985]: ERROR: Failed to create lock file: File exists
Dec 24 09:08:20 Linksys local5.err ksmbd: [ksmbd-manager/2055]: ERROR: Failed to create lock file: File exists
Dec 24 09:53:25 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:21:28 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:44:04 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:50:13 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:58:48 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:58:48 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:59:08 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:59:11 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 10:59:12 Linksys daemon.err dnsmasq[1282]: failed to send packet: Address family not supported by protocol
Dec 24 11:01:19 Linksys daemon.err httpd[1522]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 123

PostPosted: Thu Dec 24, 2020 15:13    Post subject: Reply with quote
itwontbewe wrote:
Status/LAN
Active Clients

disconnected devices remain until lease time expires
i assumed it was going to leave once lease time ran out. it did not. it remains in the list
turmoil77
DD-WRT Novice


Joined: 06 Jan 2013
Posts: 8

PostPosted: Thu Dec 24, 2020 15:59    Post subject: Reply with quote
itwontbewe wrote:
itwontbewe wrote:
Status/LAN
Active Clients

disconnected devices remain until lease time expires
i assumed it was going to leave once lease time ran out. it did not. it remains in the list


Same, here! The offline clients continues on "active clients" table.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum