Frakko DD-WRT Guru
Joined: 06 May 2016 Posts: 518
|
Posted: Sat Dec 12, 2020 18:15 Post subject: Netgear R6400 Vlans |
|
Hi, I wanted to know if the Netgear R6400 manages the Vlans via switch config. As long as it worked I wasn't able to set them up.
Should you replace it, do you advise me to keep it?
Thanks. |
|
egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
|
Posted: Sat Dec 12, 2020 18:28 Post subject: |
|
It manages vlans fine but not via the GUI see:
https://wiki.dd-wrt.com/wiki/index.php/Switched_Ports
I administer a couple of R6400v1's and v2's and R7000's.
Running fine, here in Europe the R6400v2 is reasonable priced with enough flash RAM in contrast to the C7-v5 which is Atheros.
But if you have some money to spend I would go for a Netgear R7800 but Atheros/Qualcomm also need the CLI to setup VLAN's
But it is just my personal opinion _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|