Some kind of pass thru WRT3200 amazon recast

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
bhill21
DD-WRT Novice


Joined: 25 Mar 2020
Posts: 34

PostPosted: Sat Oct 31, 2020 18:50    Post subject: Some kind of pass thru WRT3200 amazon recast Reply with quote
I have a Netgear R7450 as main router (192.168.1.1) with a wrt3200(192.168.2.1) as an ap with dd wrt (r440048) running Wireguard. I have a amazon recast on the 3200 as well as all fire sticks. It plays well but If I go back to the Netgear on firesticks, I can’t view anything on the Fire sticks from the recast because it’s on a different network.

Is there a way to allow use of the amazon recast on both networks or some kind of pass thru?

Thanks in advance for any input
Sponsor
bhill21
DD-WRT Novice


Joined: 25 Mar 2020
Posts: 34

PostPosted: Mon Nov 02, 2020 23:30    Post subject: Reply with quote
Anybody?
bhill21
DD-WRT Novice


Joined: 25 Mar 2020
Posts: 34

PostPosted: Fri Nov 06, 2020 0:11    Post subject: Reply with quote
Ok I’ve been reading and it looks like I need to make a lan to lan between the two to keep everything on the same network. I’ve tried this by attempting to change the IP address of 3200 (made it 192.168.1.5) to that of the Netgear router (192.16.1.1) And disabled DHCP on the 3200. I made sure the Ethernet was plugged into a lan port of the 3200 not the wan. This doesn’t work and also can’t access the web GUI of the 3200 Forcing me to reset and restore config.

Am I missing some steps or do I need to create a bridge between routers or something? I just want to use my 3200 (vpn for Firesticks via Wireguard tunnel) while being able to use my amazon recast which is on the Netgear router as the recast and firesticks must be on the same network.

Any help in the right direction would be greatly appreciated
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12834
Location: Netherlands

PostPosted: Fri Nov 06, 2020 8:07    Post subject: Reply with quote
See the wiki
https://wiki.dd-wrt.com/wiki/index.php/Wireless_Access_Point

For wireguard on a WAP see the wg advanced setup guide

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum