Posted: Sat Oct 03, 2020 2:08 Post subject: New Build - 10/02/2020 - r44483
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WireGuard 1.0.20200908 & Tools: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks BS & egc!
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Flashed it! it came back up, im tired thats all for now.
Update 10-3-20: no issues for my setup what so ever that i can find. _________________ Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021 SVN Timeline:
https://svn.dd-wrt.com/timeline Commands: Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &
WRT1900ACv1: WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Last edited by PIZZEDMEOFF on Sun Oct 04, 2020 1:18; edited 1 time in total
I have the Linksys WRT-1900AC v1 (r44483 02/10/2020)
iPhone 11 Pro 512GB iOS 14.01
iPhone tethers correctly, IPv4 & IPv6 address's both showing in router sys-info however for some reason it will not allow "other devices" to connect to the internet via WiFi &/or Wired.
I was using iOS 13.7 & all the previous firmware(s) & always working 100% perfectly.
If i connect my old iPhone 4S 32GB to the router using tethering mode, the internet works 100% perfectly.
It seems this is an iOS 14 issue & NOT a modem/router or DD-WRT firmware issue.
iPhone tethering works A-OK when connected directly to a laptop or computer.
Joined: 27 Apr 2016 Posts: 112 Location: Down down .... under
Posted: Sun Oct 04, 2020 8:02 Post subject:
I lose access to the Web GUI with this build after a while. _________________ Linksys WRT1900ACv2 - My new go to build: DD-WRT v3.0-r44048 std (08/02/20) - STABLE
My WRT1900ACv2 has now been serving me for more than 5years Most reliable router I have ever owned!
Upgraded from 44048 without issues via GUI and no reset.
Issues: Wifi is still unreliable for me. With 5ghz 80-wide channels, performance is great and stable for a while but then wifi connections go into a zombie state for iphones and macbooks (maybe others as well). Recycling the wifi on the client fixes it right away but it doesn't last long. With 5ghz 40-wide channels, I don't see the zombie connections as often but performance is all over the map with high buffer bloat. Tried a bunch of different things but had to fall back to 44048.
Wireguard client: Using Mullvad client config following parts of Hellakenut's "idiots guide for commercial clients" and egc's updated guide to eliminate the startup script.
Kernel: Linux 4.9.231 #1979 SMP Sun Aug 2 03:35:09 +03 2020 armv7l
Router/Version: wrt32x
File/Kernel: Linux 4.9.236 #2100 SMP Fri Sep 18 11:06:48 +03 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44406 std (09/18/20)
Mode/Status: AP only
Issues/Errors: Web upgrade without reset to default. It looks ok after update. After few hours back to home, the wireless becomes unstable and cannot connect. I tried using firefox login into router and no response but SSH without problem. Also, i cannot see "httpd -n -S -p 80 -m 443" in SSH top.
I tried to hard reset to factory default. it seems no help at all.
NTP server also problematic during start up. It cannot connect NTP server via IP (not hostname). It is necessary to stop and start process monitor then get back to normal.
Upgraded WRT1200AC v1's from r44467 to r44483 using Brave Version 1.10.97 (64-bit) running on Linux Mint 20 OS.
Successful update and reboot. No reset, nothing disabled prior to update, uptime aproximatly 21 hrs, wired/wireless connected, vpn up immediately (Expressvpn). I do not use NAS. SFE is always disabled. OpenVPN client/DNSMasq, QoS with PIE always enabled.
Kernel Version Linux 4.9.237 #2128 SMP Fri Oct 2 00:43:25 +03 2020 armv7l
Wired/wireless/VPN/VPN passthru/DNSMasq/QoS working with no issues. Wirelessly streamed several hours with multiple devices yesterday with no drops or buffering. GUI and browser response time seems noticably faster.
Joined: 04 Oct 2020 Posts: 12 Location: 127.0.0.1, Virginia, USA
Posted: Sun Oct 04, 2020 21:45 Post subject:
Router/Version: Linksys WRT1900ACv1
File/Kernel: webflash
Previous/Reset: v3.0-r44048 std (08/02/20)
Mode/Status: Gateway
Issues/Errors: Router information shows 600Mhz for processor speed instead of 1200MHz. Otherwise so far it has been stable. Will update if this changes.
Code:
root@CYBERDEATH:/opt# cat /proc/cpuinfo
model name : ARMv7 Processor rev 2 (v7l)
processor : 0
BogoMIPS : 25.00
Features : half thumb fastmult vfp edsp vfpv3 tls idiva idivt vfpd32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
model name : ARMv7 Processor rev 2 (v7l)
processor : 1
BogoMIPS : 25.00
Features : half thumb fastmult vfp edsp vfpv3 tls idiva idivt vfpd32 lpae
CPU implementer : 0x56
CPU architecture: 7
CPU variant : 0x2
CPU part : 0x584
CPU revision : 2
Hardware : Marvell Armada 370/XP (Device Tree)
Revision : 0000
Serial : 0000000000000000
Router/Version: WRT1900 AC V1
File/Kernel: ddwrt-linksys-wrt1900ac-webflash.bin
Previous/Reset: R43471, no reset
Mode/Status: Gateway, 2.4Ghz, 5Ghz, PPPoE; running YaMon, DHCP, have an NFS-mounted directory
up 22 min, load average: 0.00, 0.08, 0.08
5GHz reports 111.16 Mb/s speed ~1m from router
Internet download speed is nominal. Upload is inline with recent results (below rated, however).
Issues/Errors: None yet
Reverted to 43471; while the WiFi, for most devices, seemed stable, the Google Nest doorbell was reported offline for up to 15 minutes multiple times (at least four) since upgrading. I'm presuming this was an issue with the 2.4Ghz WiFi and not an issue with the Google servers themselves. (Interestingly, though, we also have a WiFi security camera streaming to a different device; it had no issues.)
DD-WRT
Waterfox 2020.09
Router Model Linksys WRT1900ACS
Firmware Version DD-WRT v3.0-r44483 std (10/02/20)
Kernel Version Linux 4.9.237 #2128 SMP Fri Oct 2 00:43:25 +03 2020 armv7l
Current Time Mon, 05 Oct 2020 18:19:41
Uptime 2 days, 8:56
Connection Type:PPPoE 1Gbps
IPv6:DHCPV6 with prefix delegation -on- IPv4/IPv6 dual-stack -OK
Avoid DHCP6 client release on reconnect-Enable!!!
Port Forwarding:OK
5GHz wpa2(AES)Channel width 80MHz Mixed, wireless channel 48 Radio Time Restrictions On Short GI-on, Single User Beamforming-on,- All Ok
2.4GHz wpa2(AES)Channel width 20/40 MHz Mixed, wireless channel 11 Radio Time Restrictions On, Disable LDPC (ESP8266 Workaround)on, TurboQAM (QAM256) support on, - All Ok
wireless region-Romania
On the ETHERNET side things move very well, it runs without problems 1Gbps,in the speed test it has a value somewhere at 934 Mbps..
in the link below some screenshots with my settings:
http://s.go.ro/s728kyks
wifi without errors, wired internet moves very fast and fluid, the only inconvenience is speed on the wifi side, speed fluctuates in speed test and does not exceed 490Mbps, speed on wifi fluctuates not constant, this is the only minus!
_________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
root@DD-WRT:~# cat /proc/cpuinfo
model name : ARMv7 Processor rev 1 (v7l)
processor : 0
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1
model name : ARMv7 Processor rev 1 (v7l)
processor : 1
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1
Hardware : Marvell Armada 380/385 (Device Tree)
Revision : 0000
Serial : 0000000000000000
root@DD-WRT:~# _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
