I have been running this version for 5 days and it works flawlessly, the web interface is accessed quickly, wifi without errors, wired internet moves very fast and fluid, the only inconvenience is speed on the wifi side, speed fluctuates in speed test and does not exceed 490Mbps. _________________ Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
I have the Linksys WRT-1900AC v1 (r44483 02/10/2020)
iPhone 11 Pro 512GB iOS 14.01
iPhone tethers correctly, IPv4 & IPv6 address's both showing in router sys-info however for some reason it will not allow "other devices" to connect to the internet via WiFi &/or Wired.
I was using iOS 13.7 & all the previous firmware(s) & always working 100% perfectly.
If i connect my old iPhone 4S 32GB to the router using tethering mode, the internet works 100% perfectly.
It seems this is an iOS 14 issue & NOT a modem/router or DD-WRT firmware issue.
iPhone tethering works A-OK when connected directly to a laptop or computer.
Anyone tried to use the ath2 as another wifi on the latest? is it working already?
I upgraded mine on wrt3200ac and i see the ath2 can be now be configurable but I remember it wasn't implemented a year ago or so since my last upgrade.
I did some search on old threads but didn't found anything related, wanted to check if it was implemented already or not.
Ask Apple for an update to fix bugs they created, confirmed themselves no workaround and to wait for next iOS release.
creizlein wrote:
Anyone tried to use the ath2 as another wifi on the latest?
It is not a radio meant for AP use, or any use at all other than by design for DFS or radar detaction, listening only.
It has no external antenna, useless, so leave it disabled under wireless network mode for stability reasons among others.
It is not a radio meant for AP use, or any use at all other than by design for DFS or radar detaction, listening only.
It has no external antenna, useless, so leave it disabled under wireless network mode for stability reasons among others.[/quote]
Figured that much, thank you for your reply.
There isn't even a way to disable the interface, you can just disable the wireless mode, but it is left in AP mode.
Joined: 30 May 2017 Posts: 582 Location: Rural Manitoba
Posted: Sun Oct 11, 2020 22:48 Post subject:
creizlein wrote:
It is not a radio meant for AP use, or any use at all other than by design for DFS or radar detaction, listening only.
It has no external antenna, useless, so leave it disabled under wireless network mode for stability reasons among others.
Figured that much, thank you for your reply.
There isn't even a way to disable the interface, you can just disable the wireless mode, but it is left in AP mode.
Thanks[/quote]
Setting the "Wireless Network Mode" to disabled shuts the radio down. I run two 3200's and there is no broadcast from either unit from Ath2. _________________ Starlink & DSL -> TPLink TL-R470T+
->
WRT3200acm Master WDS 5GHz 80Mhz CH 100 (+6) r55819
Ath1 2.4Ghz Disabled
99 Static Leases
ExpressVPN
WRT3200acm r55819 WDS Station 5Ghz
Ath1 AP N/G Mixed Channel 11 HT40
WRT1900Ac V1 5Ghz r55819 WDS Station
(Defective, no 2.4Ghz but 5Ghz works great)
WRT1900AC V1 5Ghz AC 80Mhz WDS Station r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT1900ACS SPARE r54914
WRT1900AC SPARE r54914
WRT1900AC V1 5Ghz AC 80Mhz WDS-AP r55819
2.4Ghz AP Ch1 HT20 Mixed
WRT54G DD-WRT v3.0-r37305 micro AP CH 6 Mixed - Not in use
