New Build - 08/13/2020 - r44187

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1604

PostPosted: Thu Aug 13, 2020 13:38    Post subject: New Build - 08/13/2020 - r44187 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44112 (GitHub mirror)

Notes:
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
tatsuya46
DD-WRT Guru


Joined: 03 Jan 2010
Posts: 7373
Location: YWG, Canada

PostPosted: Thu Aug 13, 2020 14:37    Post subject: Reply with quote
Router Model: dir-862L(x2), wndr4300, x86_64(2x qca9984 ,1x qca6174)

Status: it runs
Reset: no
Errors: see tickets below

https://svn.dd-wrt.com/ticket/5225 *
https://svn.dd-wrt.com/ticket/5603 *
https://svn.dd-wrt.com/ticket/5848
https://svn.dd-wrt.com/ticket/5938
https://svn.dd-wrt.com/ticket/6286
https://svn.dd-wrt.com/ticket/6315
https://svn.dd-wrt.com/ticket/6481 *
https://svn.dd-wrt.com/ticket/6495 *
https://svn.dd-wrt.com/ticket/6655
https://svn.dd-wrt.com/ticket/6842
https://svn.dd-wrt.com/ticket/6903 *
https://svn.dd-wrt.com/ticket/6921
https://svn.dd-wrt.com/ticket/7154


wds stations connected to qca6174 wds ap transfer no data no ping nothing.

_________________
LATEST FIRMWARE(S)

BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers

[x86_64] Haswell i3-4150/QCA9984/QCA9882 ----> DD-WRT v3.0-r44586 std
[QUALCOMM] DIR-862L ------------------------------> DD-WRT v3.0-r44586 std
[QUALCOMM] WNDR4300 v1 ------------------------> DD-WRT v3.0-r44586 std
[QUALCOMM] DIR-862L ------------------------------> DD-WRT v3.0-r44586 std
▲ ACTIVE / INACTIVE ▼
[BROADCOM] DIR-860L A1 --------------------------> DD-WRT v3.0-r44583 std


If you use DSLReports please enable hi-res bufferbloat.


Sigh.. why do i exist anyway..
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7245
Location: Texas, USA

PostPosted: Thu Aug 13, 2020 15:13    Post subject: Reply with quote
Not sure if the webUI fix for start IP address of dhcp range is fixed in this release or not.

https://svn.dd-wrt.com/changeset/44188

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 315

PostPosted: Thu Aug 13, 2020 15:32    Post subject: Reply with quote
SSH update, no issues

Router/Version: Netgear R9000 X10
File/Kernel: DD-WRT v3.0-r44187 std (08/13/20) / Linux 4.9.232 #495 SMP Wed Aug 12 05:18:35 +03 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44112 std (08/09/20) / No
Mode/Status: Gateway
Issues/Errors: None / None

_________________
Netgear R9000 X10
DD-WRT v3.0-r44538 std (10/13/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
QoS: HTB w/CAKE & ACK, SYN, FIN & RST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0
Xfinity 1Gbps(max)/42Mbps
05dyna
DD-WRT Guru


Joined: 25 Jan 2008
Posts: 911

PostPosted: Thu Aug 13, 2020 17:15    Post subject: Reply with quote
kernel-panic69 wrote:
Not sure if the webUI fix for start IP address of dhcp range is fixed in this release or not.

https://svn.dd-wrt.com/changeset/44188


Just for fun I reset a spare ea8500 and flashed with this build and changed local ip and saved, the end result was the dhcp start address did update properly so you’d be correct.
madmark
DD-WRT Novice


Joined: 29 Jul 2019
Posts: 13

PostPosted: Thu Aug 13, 2020 19:02    Post subject: Reply with quote
Router ModelTP-Link TL-WR740N v4
Firmware Version DD-WRT v3.0-r44187 std (08/13/20)
Kernel VersionLinux 3.10.108-d10 #56017 Thu Aug 13 03:05:18 +04 2020 mips


The upnp is not working and some other logs of errors :
Aug 13 20:44:27 DD-WRT daemon.info hostapd: ath0: STA ac:d1:b8:e3:4b:39 WPA: pairwise key handshake completed (RSN)
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection started
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Starting call (launching pppd, opening GRE)
Aug 13 20:46:45 DD-WRT daemon.notice pppd[1631]: pppd 2.4.8 started by root, uid 0
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: EOF or bad error reading ctrl packet length.
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: couldn't read packet header (exit)
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: CTRL read failed

Aug 13 20:46:51 DD-WRT daemon.debug pptpd[1630]: CTRL: Reaping child PPP[1631]
Aug 13 20:46:51 DD-WRT daemon.info pppd[1631]: Exit.
Aug 13 20:46:51 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection finished

The proof of upnp is not working is file jpg with dc++. In firmware 06-23-2020-r43502 the upnp is working. I have the same settings and configuration.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7245
Location: Texas, USA

PostPosted: Thu Aug 13, 2020 20:23    Post subject: Reply with quote
05dyna wrote:
kernel-panic69 wrote:
Not sure if the webUI fix for start IP address of dhcp range is fixed in this release or not.

https://svn.dd-wrt.com/changeset/44188


Just for fun I reset a spare ea8500 and flashed with this build and changed local ip and saved, the end result was the dhcp start address did update properly so you’d be correct.


I was referring to if the netmask was anything but 255.255.255.0.

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1516
Location: Belgrade

PostPosted: Fri Aug 14, 2020 5:53    Post subject: Reply with quote
madmark wrote:
Router ModelTP-Link TL-WR740N v4
Firmware Version DD-WRT v3.0-r44187 std (08/13/20)
Kernel VersionLinux 3.10.108-d10 #56017 Thu Aug 13 03:05:18 +04 2020 mips


The upnp is not working and some other logs of errors :
Aug 13 20:44:27 DD-WRT daemon.info hostapd: ath0: STA ac:d1:b8:e3:4b:39 WPA: pairwise key handshake completed (RSN)
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection started
Aug 13 20:46:45 DD-WRT daemon.info pptpd[1630]: CTRL: Starting call (launching pppd, opening GRE)
Aug 13 20:46:45 DD-WRT daemon.notice pppd[1631]: pppd 2.4.8 started by root, uid 0
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: EOF or bad error reading ctrl packet length.
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: couldn't read packet header (exit)
Aug 13 20:46:51 DD-WRT daemon.err pptpd[1630]: CTRL: CTRL read failed

Aug 13 20:46:51 DD-WRT daemon.debug pptpd[1630]: CTRL: Reaping child PPP[1631]
Aug 13 20:46:51 DD-WRT daemon.info pppd[1631]: Exit.
Aug 13 20:46:51 DD-WRT daemon.info pptpd[1630]: CTRL: Client 5.173.104.94 control connection finished

The proof of upnp is not working is file jpg with dc++. In firmware 06-23-2020-r43502 the upnp is working. I have the same settings and configuration.


about pptp log:
Somebody is hammering your pptp port (1723) and trying to connect from IP 5.173.104.94 (whois tells me he/she is from Amsterdam)...
about upnp: picture you attached tells me your client couldn't start mini-upnp...
xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 79

PostPosted: Fri Aug 14, 2020 8:37    Post subject: Reply with quote
Router Model / Version: Linksys EA8500
Previous Firmware: DD-WRT v3.0-r44112 std (08/09/20)
Current Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
Reset: No
Mode: Wireless - Client, Operating - Gateway
Setup: SFE, NTP, DDNS (inadyn-Entware), DNSMasq (GUI+ additional options on USB, Syslog, SSH,
Telnet, USB, ProFTPD (with users), Samba (with users), CoovaChilli (with local users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn)
Uptime: up 16:53, load average: 0.06, 0.01, 0.00
Status: OK
Issues: CoovaChilli/GUI WAN link down
Temperature: CPU 53.545 °C / ath0 47 °C / ath1 48 °C


Router Model / Version: Netgear WNDR3700v1 X 2
Previous Firmware: DD-WRT v3.0-r44112 std (08/09/20)
Current Firmware: DD-WRT v3.0-r44187 std (08/13/20)
File: dd-wrt-webflash.bin
Kernel: Linux 3.10.108-d10 #56039 Thu Aug 13 04:38:08 +04 2020 mips
Reset: No
Mode: Wireless - Client, Operating - Router
Setup: NTP, DNSMasq, Syslog, SSH, Telnet, Remote Access (HTTPS & SSH)
Uptime:
    Rouer #1 up 16:53, load average: 0.07, 0.03, 0.05
    Router #2 up 16:53, load average: 0.04, 0.02, 0.04

Status: OK
Issues: CoovaChilli/GUI WAN link down


Unfortunately I'm still having issues when I Click on the Apply Settings button under the Hotspot tab. Although the firewall entries (See Ticket #7193 https://svn.dd-wrt.com/ticket/7193) are correct the wan link seems to be down.

This happens every time. I'm able to get the wan link up by manually running udhcpc or Clicking on the Apply Settings button under the Basic Setup tab.

Please see Ticket #7197 (https://svn.dd-wrt.com/ticket/7197) for details.

Updated on issues from Build 44112
The issues reported relating to formating with the localusers file 'fonusers.local' have been resolved. See post for build r44112 at (https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1213822#1213822) for details. The reference ticket (https://svn.dd-wrt.com/ticket/7189) has been closed.


The issues reported relating to the nat rules being wiped/erased after hitting the 'Apply Settings' button from the Gui under the Hotspot tab have been resolved. See post for build r44112 at (https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1213822#1213822) for details. The reference ticket (https://svn.dd-wrt.com/ticket/7193) has been closed.


Just want to say thanks once again to BS for working on this. Everything else on this build is great Very Happy.
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 215

PostPosted: Fri Aug 14, 2020 9:05    Post subject: Reply with quote
Router: Netgear R7800
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
Températures: CPU 49.866 °C / ath0 45 °C / ath1 44 °C
Status: Working
Reset: No
Previous: 43652
Errors: No

Working very well :
Router mode : DHCP
SFE Enable
STP Disable
SmartDNS Resolver Enabled
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)

without VPN


with VPN


Last edited by Bernadoe on Fri Aug 14, 2020 14:53; edited 1 time in total
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6361
Location: Netherlands

PostPosted: Fri Aug 14, 2020 12:59    Post subject: Reply with quote
Router Model: Netgear R7800

Firmware Version: DD-WRT v3.0-r44187 std (08/13/20)
Kernel Version: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l

Upgraded from: DD-WRT v3.0-r43652 std (07/03/20)

Reset: No, not this time

Status: Up and running for 8 hours , basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz, USB storage NAS working, OpenVPN server working,
WireGuard working with Policy Based Routing.

Errors: None

Thanks BS!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 170
Location: Maine, USA

PostPosted: Fri Aug 14, 2020 17:42    Post subject: Reply with quote
Router/Version: Netgear WNR2000v3
File: wnr2000v3-webflash.bin
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 3.10.108-d10 #56043 Thu Aug 13 04:52:03 +04 2020 mips
Mode: AP
Previous: r43904
Reset?: N
Status: Working
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1594
Location: Canada

PostPosted: Fri Aug 14, 2020 21:13    Post subject: Reply with quote
Router: 2x Netgear R7800 (Gateway + WiFi Routers)
Firmware: DD-WRT v3.0-r44187 std (08/13/20) [From: DD-WRT v3.0-r44112 std (08/09/20)]
Linux Rel: Linux 4.9.232 #627 SMP Tue Aug 11 2020 armv7l [From: Linux 4.9.232 #622 SMP Fri Aug 7 armv7l]
WiFi Firmware: ver 10.4-3.9.0.2-00101
WireGuard: WireGuard 1.0.20200712 loaded
Reset: NO, did Power Cycle after loading new firmware via CLI
Status & Uptime: Working over 5 hours
Issues/Fixes: none/none

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44483 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44483 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44483 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r44483 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 72

PostPosted: Sat Aug 15, 2020 2:48    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using SSH
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r44112 std (08/09/20)
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, USB, NTP TimeSync, wireguard
Status: Working Fine

Thank you BrainSlayer for Wonderful firmware.

Thanks kernel-panic & egc for your help in forums.

Update: Just encountered in httpd.
Aug 15 08:20:06 R7800 user.err : Caught SIGSEGV (11) in unl_genl_msg
Aug 15 08:20:06 R7800 user.err : Fault at memory location 0x0000001c due to address not mapped to object (1).
Aug 15 08:20:06 R7800 user.err : Thread 1769: httpd
Aug 15 08:20:06 R7800 user.err : === Context:
Aug 15 08:20:06 R7800 user.err : TRAPNO:0000000e ERRCODE:00000017 OLDMASK:00000000 R0:00c3c490
Aug 15 08:20:06 R7800 user.err : R1:00000000 R2:00000000 R3:00000010 R4:00c3c490
Aug 15 08:20:06 R7800 user.err : R5:00000001 R6:b6c37170 R7:00000000 R8:00000028
Aug 15 08:20:06 R7800 user.err : R9:b6c388d9 R10:00000002 FP:00000000 IP:b6fc433c
Aug 15 08:20:06 R7800 user.err : SP:b6c36fe8 LR:b6f74a84 PC:b6c902cc CPSR:60000010
Aug 15 08:20:06 R7800 user.err : FAULTADDR:0000001c
Aug 15 08:20:06 R7800 user.err : === Backtrace:
Aug 15 08:20:06 R7800 user.err : # Searching frame 0 (FP=0x00000000, PC=0xb6c902cc)
Aug 15 08:20:06 R7800 user.err : # PC-37c[0xb6c8ff50]: 0xe92d4ff0 stmfd sp!
Aug 15 08:20:06 R7800 user.err : # Stack at 0x00000000 is not mapped; terminating backtrace.
Aug 15 08:20:06 R7800 user.err : /usr/lib/libnl-tiny.so[0xb6c8b000](unl_genl_msg+0x00000038)[0xb6c902cc]
Aug 15 08:20:06 R7800 user.err : === Code:
Aug 15 08:20:06 R7800 user.err : b6c9028c: e1a00005 e8bd8070 e92d40f0 e24dd014 e1a06000 e1a05001 e1a07002 ebfff320
Aug 15 08:20:06 R7800 user.err : b6c902ac: e2504000 0a00000e e5962008 e3570000 e6ef5075 03a01000 13a01c03 e1a00004
Aug 15 08:20:06 R7800 user.err : b6c902cc: >e592301c e2133001 11d232b0 e3a02000 e58d2000 e98d0022 e1a01002 e58d200c
Aug 15 08:20:06 R7800 user.err : b6c902ec: ebfff321 e1a00004 e28dd014 e8bd80f0 e92d47ff e1a06000 e3a00003 e1a05001
Aug 15 08:22:00 R7800 user.info : httpd : maybe died, we need to re-exec it
Aug 15 08:22:00 R7800 daemon.info httpd[1785]: httpd : httpd server started at port 80
Aug 15 08:22:00 R7800 user.info : httpd : http daemon successfully started
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7029
Location: Dresden, Germany

PostPosted: Sat Aug 15, 2020 5:21    Post subject: Reply with quote
abhijitat wrote:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r44187 std (08/13/20)
Kernel: Linux 4.9.232 #627 SMP Tue Aug 11 03:58:20 +03 2020 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using SSH
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r44112 std (08/09/20)
Setup Using: 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, USB, NTP TimeSync, wireguard
Status: Working Fine

Thank you BrainSlayer for Wonderful firmware.

Thanks kernel-panic & egc for your help in forums.

Update: Just encountered in httpd.
Aug 15 08:20:06 R7800 user.err : Caught SIGSEGV (11) in unl_genl_msg
Aug 15 08:20:06 R7800 user.err : Fault at memory location 0x0000001c due to address not mapped to object (1).
Aug 15 08:20:06 R7800 user.err : Thread 1769: httpd
Aug 15 08:20:06 R7800 user.err : === Context:
Aug 15 08:20:06 R7800 user.err : TRAPNO:0000000e ERRCODE:00000017 OLDMASK:00000000 R0:00c3c490
Aug 15 08:20:06 R7800 user.err : R1:00000000 R2:00000000 R3:00000010 R4:00c3c490
Aug 15 08:20:06 R7800 user.err : R5:00000001 R6:b6c37170 R7:00000000 R8:00000028
Aug 15 08:20:06 R7800 user.err : R9:b6c388d9 R10:00000002 FP:00000000 IP:b6fc433c
Aug 15 08:20:06 R7800 user.err : SP:b6c36fe8 LR:b6f74a84 PC:b6c902cc CPSR:60000010
Aug 15 08:20:06 R7800 user.err : FAULTADDR:0000001c
Aug 15 08:20:06 R7800 user.err : === Backtrace:
Aug 15 08:20:06 R7800 user.err : # Searching frame 0 (FP=0x00000000, PC=0xb6c902cc)
Aug 15 08:20:06 R7800 user.err : # PC-37c[0xb6c8ff50]: 0xe92d4ff0 stmfd sp!
Aug 15 08:20:06 R7800 user.err : # Stack at 0x00000000 is not mapped; terminating backtrace.
Aug 15 08:20:06 R7800 user.err : /usr/lib/libnl-tiny.so[0xb6c8b000](unl_genl_msg+0x00000038)[0xb6c902cc]
Aug 15 08:20:06 R7800 user.err : === Code:
Aug 15 08:20:06 R7800 user.err : b6c9028c: e1a00005 e8bd8070 e92d40f0 e24dd014 e1a06000 e1a05001 e1a07002 ebfff320
Aug 15 08:20:06 R7800 user.err : b6c902ac: e2504000 0a00000e e5962008 e3570000 e6ef5075 03a01000 13a01c03 e1a00004
Aug 15 08:20:06 R7800 user.err : b6c902cc: >e592301c e2133001 11d232b0 e3a02000 e58d2000 e98d0022 e1a01002 e58d200c
Aug 15 08:20:06 R7800 user.err : b6c902ec: ebfff321 e1a00004 e28dd014 e8bd80f0 e92d47ff e1a06000 e3a00003 e1a05001
Aug 15 08:22:00 R7800 user.info : httpd : maybe died, we need to re-exec it
Aug 15 08:22:00 R7800 daemon.info httpd[1785]: httpd : httpd server started at port 80
Aug 15 08:22:00 R7800 user.info : httpd : http daemon successfully started


nice log. but how to reproduce? i dont know what you did

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum