New Build - 08/28/2020 - r44251

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3
Author Message
danielmunoz8274
DD-WRT Novice


Joined: 05 Sep 2020
Posts: 2

PostPosted: Sat Sep 05, 2020 20:09    Post subject: Globalprotect VPN not connect Reply with quote
Router/Version: WZR-1750DHP
File/Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous/Reset: yes
Mode/Status: AP/Gateway
Issues/Errors: Yes, impossible to connect to VPN through the router.

I have a rare issue. i can't be hable to conect to my corporate VPN through the router. I use Globalprotect VPN.

how can i determine the origin of this issue?. Thanks in advance.
Sponsor
DoesItMatter
DD-WRT Guru


Joined: 10 May 2008
Posts: 1378
Location: Pacific North West, USA

PostPosted: Sat Sep 05, 2020 20:17    Post subject: Re: Globalprotect VPN not connect Reply with quote
danielmunoz8274 wrote:
Router/Version: WZR-1750DHP
File/Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous/Reset: yes
Mode/Status: AP/Gateway
Issues/Errors: Yes, impossible to connect to VPN through the router.

I have a rare issue. i can't be hable to conect to my corporate VPN through the router. I use Globalprotect VPN.

how can i determine the origin of this issue?. Thanks in advance.


Temporarily put the computer IP, that you are using the Globalprotect VPN software, into the DMZ IP and see if you can connect.

If you can connect with the computer IP in the DMZ, then some ports may be being blocked.

Might have to do a reset and re-configure from scratch if that is the case.

_________________
Evil or Very Mad Soylent Green Is People ! Evil or Very Mad
Twisted Evil =-=-=-=-=-=-=-=-=-=-= Twisted Evil
Netgear Nighthawk R7000 - DD-WRT Build R45420
Linksys EA8500 - OpenWRT IPQ806x Trunk R15252 5.4 Kernel

TP-Link Archer C7 V3 - OpenWRT Build R15385 5.4 Kernel
Linksys E3000 - FreshTomato Build MIPSR2 2020.8
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 5920
Location: Romerike, Norway

PostPosted: Sat Sep 05, 2020 20:38    Post subject: Reply with quote
Have you enabled the VPN Passtrough?
danielmunoz8274
DD-WRT Novice


Joined: 05 Sep 2020
Posts: 2

PostPosted: Sat Sep 05, 2020 21:02    Post subject: Re: Globalprotect VPN not connect Reply with quote
DoesItMatter wrote:
danielmunoz8274 wrote:
Router/Version: WZR-1750DHP
File/Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous/Reset: yes
Mode/Status: AP/Gateway
Issues/Errors: Yes, impossible to connect to VPN through the router.

I have a rare issue. i can't be hable to conect to my corporate VPN through the router. I use Globalprotect VPN.

how can i determine the origin of this issue?. Thanks in advance.


Temporarily put the computer IP, that you are using the Globalprotect VPN software, into the DMZ IP and see if you can connect.

If you can connect with the computer IP in the DMZ, then some ports may be being blocked.

Might have to do a reset and re-configure from scratch if that is the case.


Thanks for your fast response DoesItMatter and Per Yngve Berg.

I have already enable IPSec Passthrough, PPTP Passthrough, L2TP Passthrough. Already re-configure my router from the scratch. I have put the IP addres of my PC in the DMZ. After that, i have rebooted the router. the result is the same. I don't able to connect to my company vpn.

Thanks for your help. If its posible, i wait for more ideas. Thanks.
puremind
DD-WRT Novice


Joined: 03 Jul 2019
Posts: 17

PostPosted: Sun Sep 06, 2020 10:10    Post subject: Reply with quote
blaser wrote:
Router: Netgear R8500
Kernel: Linux 4.4.233 #936 SMP Thu Aug 27 17:44:00 +04 2020 armv7l
Reset: Yes
Mode: Internet gateway and WIFI AP
Status: Working
Errors: yes, httpd dies
Uptime: 1h

just upgraded my router to Netgear R8500, I had some challenges, finally working.
httpd died couple of times, see syslog


Unfortunately this is not new. My R8500 also experiences this with 44213
The interesting part is that you can log on from another device!

_________________
Netgear R8500
ZenInTexas
DD-WRT Novice


Joined: 11 Aug 2020
Posts: 11

PostPosted: Sun Sep 06, 2020 18:54    Post subject: Reply with quote
Router/Version: Linksys EA2700/V1
File/Kernel: cli dd-wrt-44251-ea2700.trx/Linux 4.4.233 #3476 Fri Aug 28 00:06:39 +04 2020 mips
Previous/Reset: r44213/No
Mode/Status: gateway,AP,DHCP/working
Issues/Errors: None/None

Streams(audio) now work without interruptions, there seemed to be an issue in r44213. Smooth upgrade, running in Texas, lowered MHz due to ambient temp. Took roughly 6 min to settle.

Router/Version: Linksys EA6700/V1
File/Kernel: upgrade.cgi linksys-ea6700-webflash.bin/Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous/Reset: r44191/No
Mode/Status: gateway,AP,DHCP,subnet 224,IP Ports=32768/working
Issues/Errors: None/None

Smooth upgrade

Router/Version: Linksys WRT610N/V2
File/Kernel: upgrade.cgi dd-wrt.v24-44251_NEWD-2_K3.x_mega_wrt610nv2.bin/Linux 4.4.233 #3488 Fri Aug 28 00:21:38 +04 2020 mips
Previous/Reset: r44213/No
Mode/Status: gateway, AP, DHCP, VLAN, Port Forward, IP Ports=32768/working
Issues/Errors: None/None

smooth upgrade, settled in less than 3 min
lunawatp
DD-WRT Novice


Joined: 09 Sep 2020
Posts: 1

PostPosted: Thu Sep 10, 2020 10:15    Post subject: Reply with quote
Router/Version: Asus RT-AC5300 / r44251
File/Kernel: DD-WRT v3.0-r44251 std (08/27/20)/Linux 4.4.233 #938 SMP Thu Aug 27 18:01:34 +04 2020 armv7l/ tried asus_rt-ac5300-firmware.trx and experimental_driver version
Previous/Reset: previous build 2 months old, clean reset during install
Mode/Status: AP, gateway, QoS, DHCP, 443 tcp forward
Issues/Errors: router locks up, no lan/wan connectivity after lock up. disabling all 3 radios makes it not crash
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 735
Location: Hung Hom, Hong Kong

PostPosted: Sat Sep 12, 2020 9:56    Post subject: DD-WRT BS build 43251 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel: Linux 4.4.233 #935 Thu Aug 27 17:37:20 +04 2020 armv7l
Previous: DD-WRT v3.0-r44085 std (08/07/20)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NAS & USB)
Reset: NO reset during firmware upgrade but cold boot

Summary

There were still error messages about ksmbd and wsdd2.

System Log

Samba error(s): grep -E 'wsdd|smbd' /var/log/messages
Code:

Jan  1 08:00:23 RT-N18U user.info wsdd2[1060]: starting.
Jan  1 08:00:24 RT-N18U user.err wsdd2[1060]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jan  1 08:00:24 RT-N18U user.info : smbd : samba started
Jan  1 08:00:24 RT-N18U local5.err ksmbd: [ksmbd-worker/1064]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jan  1 08:00:24 RT-N18U local5.err ksmbd: [ksmbd-worker/1064]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jan  1 08:00:27 RT-N18U user.err wsdd2[1060]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jan  1 08:00:27 RT-N18U user.err wsdd2[1060]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Sep 12 17:07:03 RT-N18U user.info : wsdd2 : windows service discovery daemon successfully stopped
Sep 12 17:07:03 RT-N18U user.err wsdd2[1060]: Terminated received.
Sep 12 17:07:03 RT-N18U user.info wsdd2[1060]: terminating.
Sep 12 17:07:03 RT-N18U user.info : ksmbd.mountd : samba daemon successfully stopped
Sep 12 17:07:03 RT-N18U local5.err ksmbd: [ksmbd-manager/1063]: ERROR: WARNING: child process exited abnormally: 1064
Sep 12 17:07:03 RT-N18U kern.info kernel: ksmbd: kill command received
Sep 12 17:07:06 RT-N18U user.info wsdd2[1616]: starting.
Sep 12 17:07:06 RT-N18U user.info : smbd : samba started
Sep 12 17:07:06 RT-N18U local5.info ksmbd: [ksmbd-manager/1622]: INFO: Unlink orphaned '/tmp/ksmbd.lock'


Error(s): grep -i err /var/log/messages | grep -v -E 'wsdd|smbd'
Code:

Jan  1 08:00:14 RT-N18U kern.err kernel: bcmsflash: found no supported devices
Jan  1 08:00:14 RT-N18U daemon.info mstpd[633]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Jan  1 08:00:14 RT-N18U daemon.info mstpd[633]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 7
Sep 12 17:07:01 RT-N18U kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Sep 12 17:47:00 RT-N18U daemon.err httpd[1296]: httpd : Request Error Code 404: File style/elegant/logo.png not found.
Sep 12 17:47:02 RT-N18U daemon.err httpd[1296]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases


Firmware Size

From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
.... more ....
From 26341376 (b.43209) to 26341376 (b.43217) = 0 bytes
From 26341376 (b.43217) to 26472448 (b.43334) = 131072 bytes
From 26472448 (b.43334) to 26267648 (b.43381) = -204800 bytes
From 26267648 (b.43381) to 26279936 (b.43471) = 12288 bytes
From 26279936 (b.43471) to 26279936 (b.43718) = 0 bytes
From 26279936 (b.43718) to 26341376 (b.44085) = 61440 bytes
From 26341376 (b.44085) to 26382336 (b.44251)= 40960 bytes




_________________
Router: Asus RT-N18U (rev. A1)

May the Force and farces be with you! Live long and proper!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
ampapa
DD-WRT User


Joined: 25 Nov 2011
Posts: 95

PostPosted: Mon Sep 21, 2020 18:41    Post subject: Latest stable... Reply with quote
Reading through the forum and I'm not seeing a "latest stable" version.. are builds not being identified as such anymore?

Should I just grab a nightly build and cross my fingers?

VB,
egosumumbravir
DD-WRT Novice


Joined: 19 Jun 2020
Posts: 16

PostPosted: Tue Sep 22, 2020 1:00    Post subject: Re: Latest stable... Reply with quote
ampapa wrote:
Reading through the forum and I'm not seeing a "latest stable" version.. are builds not being identified as such anymore?

Should I just grab a nightly build and cross my fingers?

I give it a few weeks and have a read of the replies in the thread from people with the same router as I'm using.

I've seen a few owners of R8000's commenting on issues in the r44340 thread. Reckon I'll skip that one.
ampapa
DD-WRT User


Joined: 25 Nov 2011
Posts: 95

PostPosted: Tue Sep 22, 2020 11:01    Post subject: Reply with quote
Thanks for the reply.

Seems like there should be a "Stable" and a "Dev Build" version stuck to the top of the thread for those that want to test and those that are looking for stability.

VB,
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2046

PostPosted: Tue Sep 22, 2020 12:07    Post subject: Reply with quote
ampapa wrote:
Seems like there should be a "Stable" and a "Dev Build" version stuck to the top of the thread for those that want to test and those that are looking for stability.

It seems you have completely missed the purpose of this thread, or any build thread for that matter. All are beta.

Search the model of your router, research user feedback then choose a build and configure. Report your results.
ampapa
DD-WRT User


Joined: 25 Nov 2011
Posts: 95

PostPosted: Tue Sep 22, 2020 18:48    Post subject: Reply with quote
blkt wrote:
ampapa wrote:
Seems like there should be a "Stable" and a "Dev Build" version stuck to the top of the thread for those that want to test and those that are looking for stability.

It seems you have completely missed the purpose of this thread, or any build thread for that matter. All are beta.

Search the model of your router, research user feedback then choose a build and configure. Report your results.


Yes thanks, I understand the purpose of "Build" threads which is why I was looking for the "Stable" builds??
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2046

PostPosted: Wed Sep 23, 2020 4:28    Post subject: Reply with quote
ampapa wrote:
Yes thanks, I understand the purpose of "Build" threads which is why I was looking for the "Stable" builds??
You keep asking for stable and I will repeat all are beta. It's a perpetual beta release cycle, so you will not find the word stable on any release. Think about how many model/revision devices DD-WRT supports; the required tasks needed to certify every device as stable for one build would be monumental. Build threads are for reporting user experience, configuration, errors and logs.

If you have R7000, you should have already read through plenty of feedback by now as it's one of the most commonly reported Broadcom routers. In that case, it's likely just flash the latest build as you have well supported model. Please do your research.
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum