New Build - 08/28/2020 - r44251

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1753

PostPosted: Fri Aug 28, 2020 5:46    Post subject: New Build - 08/28/2020 - r44251 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r44236 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, serial output, strace, tcpdump etc.
• For firewall NAT or WAN issues provide 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 134

PostPosted: Fri Aug 28, 2020 9:18    Post subject: Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel: Linux 4.4.233 #935 Thu Aug 27 17:37:20 +04 2020 armv7l
Mode: Gateway
Previous: r44236
Reset: No
Status: OK


Aug 28 11:58:05 router user.info : smbd : samba started
Aug 28 11:58:05 router local5.info ksmbd: [ksmbd-manager/1757]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Aug 28 11:58:05 router local5.info ksmbd: [ksmbd-manager/1758]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Aug 28 11:58:05 router local5.err ksmbd: [ksmbd-worker/1760]: ERROR: Recv() error Invalid input data or parameter [-7]
Aug 28 11:58:05 router local5.err ksmbd: [ksmbd-manager/1758]: ERROR: WARNING: child process exited abnormally: 1760
Aug 28 11:58:05 router local5.err ksmbd: [ksmbd-manager/1758]: ERROR: Fatal IPC error. Terminating. Check dmesg.



syslog.txt
 Description:

Download
 Filename:  syslog.txt
 Filesize:  14.7 KB
 Downloaded:  23 Time(s)


dmesg.txt
 Description:

Download
 Filename:  dmesg.txt
 Filesize:  9.57 KB
 Downloaded:  19 Time(s)

Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 288

PostPosted: Fri Aug 28, 2020 9:26    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r44251 std (08/27/20) (prev. DD-WRT v3.0-r44236 std (08/22/20))
Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL, Keep Alive reboot 5:00 in the morning
Reset: No
Status: 1h up, fine.

Router/Version: Asus RT-N66U
File: dd-wrt.v24-44251_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r44251 big (08/28/20) (prev. DD-WRT v3.0-r44236 big (08/22/20))
Kernel: Linux 4.4.233 #3484 Fri Aug 28 00:16:30 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: 44m up, fine. Also handy addition to show tunnel Endpoint IP in Status Smile

Ty BS and everyone else involved in this project!
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 6625
Location: Netherlands

PostPosted: Fri Aug 28, 2020 12:33    Post subject: Reply with quote
Zyxx wrote:

Status: 44m up, fine. Also handy addition to show tunnel Endpoint IP in Status Smile

Ty BS and everyone else involved in this project!


Glad to hear you like the addition of the endpoint to the status.

It is part of a bigger update I am developing and testing (route-up and route-down script, Firewall mark, and IPv6 ready)
But showing the endpoint is a small and I think useful update so I decided to bring this update forward and ask BS to already implement it Smile

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard Server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard Client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 139
Location: Szczecin, Poland EU

PostPosted: Fri Aug 28, 2020 15:35    Post subject: New Build - 08/28/2020 - r44251 Reply with quote
Router: Netgear WNR 3500L v2
Kernel: Linux 4.4.233 #3472 Fri Aug 28 00:01:33 +04 2020 mips
Reset: No
Mode: Internet gateway and WIFI AP
Status: Working
Errors: Nothing significant
Uptime: almost 8h

Device is updated via ssh. Router working rather good. I don't see any significant problems.
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 129

PostPosted: Fri Aug 28, 2020 16:14    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r44236 std (08/22/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
Cussiv
DD-WRT Novice


Joined: 15 Feb 2020
Posts: 27

PostPosted: Fri Aug 28, 2020 18:11    Post subject: Reply with quote
Router/Version: Netgear WNDR3700v3
Firmware: DD-WRT v3.0-r44251 mega (08/28/20)
Kernel: Linux 4.4.233 #3488 Fri Aug 28 00:21:38 +04 2020 mips
Mode: AP
Previous: r44236
Reset: NO
Status: OK
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 418

PostPosted: Fri Aug 28, 2020 18:42    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous: r44236
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 11hrs 42mins
Temperatures: CPU 66.4 °C / WL0 46.5 °C / WL1 52.2 °C
amadeus
DD-WRT Novice


Joined: 06 Nov 2019
Posts: 26

PostPosted: Fri Aug 28, 2020 21:05    Post subject: Reply with quote
Router/Version: Netgear R6700 v3
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous: r44213
Mode: Internet Gateway, Wireless AP, IPTV, USB.
Status: OK
Reset: no
Issues/Errors: Unbridged wlan forces lan throughput to half duplex.

Uptime:
11hrs 22mins
Temperatures: CPU 79.1 °C / WL0 50.5 °C / WL1 57.8 °C
brrrknee
DD-WRT Novice


Joined: 27 Aug 2020
Posts: 4

PostPosted: Sat Aug 29, 2020 17:44    Post subject: solid build Reply with quote
Router/Version: Netgear R7000
CPU version: Broadcom BCM4709, 2 cores, EDSP, 1000MHz w256MB memory
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel version: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Previous: r37015M
Reset: Yes

Repeater to hotspot on 2.4GHx radio, AP on 5GHz:
wl0-2.4GHz TurboQAM: Repeater, mode>NG-mixed, Virtual AP wl0.1 bridged (net conf bridged)
wl1-5GHz 802.11ac: AP, mode>mixed (net conf bridged)

Network attached storage available only to dd-wrt AP network, not to those connected to the primary hotspot:
via Services/NAS
enable Samba max vers 3.11
via Services/USB
enable USB options, then attaching drive, viewing the drive info and its device id(/dev/sda1) and mount point(/tmp/mnt/sda1)
via Services/NAS
present the mount point (/mnt/sda1 to the network as Share name usb_storage public, rw

On each linux system needing to connect to this NAS drive:
1> Create a hidden text file for the Router's login credentials, ~/.usbcred:

in cred file
Code:

username=admin
password=admin-pwd-on-rtr


save file, then
2> Set ownership to root, permissions to root-only-rw:
Code:

sudo chown root: ~/.usbcred
sudo chmod 0600 ~/.usbcred


3> Create an automatic at-boot mount of the NAS drive:
add a 1-line entry of the required 6 tab-separated values in file /etc/fstab
//192.168.1.1/usb_storage /media/Ndrive cifs _netdev,vers=3,rw,users,exec,suid,dev,auto,username=linux-username,uid=1000,forceuid,gid=1000,forcegid,file_mode=0777,dir_mode=0777,workgroup=workgroup,credentials=/home/linux-username/.usbcred 0 0
where

value 1 usb_storage is the share name set above in Services/NAS on the dd-wrt router
value 2 /media/Ndrive is an empty directory created on each linux system, with ownership set to nobody:nogroup, and permissions to 0777
value 3 cifs is the filesystem service used by Ubuntu linux to manage Samba connections
value 4 fs/platform specific mount options to enable full access to your NAS directories and files, including reference to the router credentials file created above

Status/Issues: Running very well

all network systems are running Ubuntu linux 20.04

dd-wrt network also serves a wired internet phone VoIP modem SipuraSPA (ITP4you)
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 138

PostPosted: Sat Aug 29, 2020 17:46    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44251 std (08/27/20)
Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Mode: Gateway.
Reset: No.
Previous: 08-22-2020-r44236
Status: Working.



Logs.txt
 Description:
Logs

Download
 Filename:  Logs.txt
 Filesize:  43.5 KB
 Downloaded:  31 Time(s)

xraive
DD-WRT User


Joined: 08 Mar 2016
Posts: 89

PostPosted: Sun Aug 30, 2020 2:20    Post subject: Reply with quote
Router Model / Version: Netgear R6300V2
Previous Firmware: DD-WRT v3.0-r44236 std (08/22/20)
Current Firmware: DD-WRT v3.0-r44251 std (08/27/20)
File: netgear-r6300v2-webflash.bin
Kernel: Linux 4.4.233 #931 SMP Thu Aug 27 08:11:22 +04 2020 armv7l
Reset: No
Mode: Wireless - AP, Operating - Gateway (WAN PPPoE)
Setup: SFE, NTP, DDNS (inadyn/Entware), DNSMasq (GUI+ additional options on USB, Lighttpd, Syslog, SSH, Telnet, USB, Samba (with users), Remote Access (HTTPS & SSH), Startup Script (For DNSMasq & inadyn), Adblock for DD-WRT by Yamaraj
Uptime: up 22:48, load average: 0.23, 0.16, 0.12
Temperatures: CPU 81.9 °C / WL0 51.1 °C / WL1 56.9 °C
Issues: None
Status: Working. Have more than 30 clients on it.

Just want to say thanks once again to BS. This build is working great.Very Happy.
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 170
Location: Maine, USA

PostPosted: Sun Aug 30, 2020 6:34    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-44251_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r44251 mega (08/28/20)
Kernel: Linux 4.4.233 #3488 Fri Aug 28 00:21:38 +04 2020 mips
Mode: AP/USB
Previous: r44213
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-44251_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r44251 mega (08/28/20)
Kernel: Linux 4.4.233 #3488 Fri Aug 28 00:21:38 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: r44213
Reset?: N
Status: Working

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-44251_NEWD-2_K3.x_mega_e2500.bin
Firmware: DD-WRT v3.0-r44251 mega (08/28/20)
Kernel: Linux 4.4.233 #3488 Fri Aug 28 00:21:38 +04 2020 mips
Mode: Gateway/USB/bwmon
Previous: r44213
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Status: Wrong file - Hash has not updated since r44154

Router/Version: Linksys WRT54G2v1
File: dd-wrt.v24_micro_generic.bin
Firmware: DD-WRT v3.0-r44251 micro (08/27/20)
Kernel: Linux 2.4.37 #61808 Thu Aug 27 16:03:30 +04 2020 mips
Mode: Gateway
Previous: r44213
Reset?: Y
Status: Working
egosumumbravir
DD-WRT Novice


Joined: 19 Jun 2020
Posts: 16

PostPosted: Sun Aug 30, 2020 7:17    Post subject: Reply with quote
Router Model / Version: Netgear r8000
Previous Firmware: DD-WRT v3.0-r43471 std (06/19/20)
Current Firmware: DD-WRT v3.0-r44251 std (08/27/20)
File: netgear-r8000-webflash.bin
Kernel: Linux 4.4.233 #936 SMP Thu Aug 27 17:44:00 +04 2020 armv7l
Reset: No
Mode: Wireless - AP, Operating - Gateway (WAN DHCP)
Setup: NTP, DDNS, SSH, USB, Samba, OpenVPN tunnel from remote LAN.
Uptime: up 2:45, load average: 0.03, 0.08, 0.08
Temperatures: CPU 59.1 °C / WL0 48.1 °C / WL1 42.3 °C / WL2 48.3 °C
Issues: Forgot to unmount the USB /OPT. Unit updated and then rebooted when I logged in. After that, seems to be otherwise working entirely as expected.
Status: Currently working.
blaser
DD-WRT Guru


Joined: 16 Jul 2006
Posts: 508

PostPosted: Sun Aug 30, 2020 13:03    Post subject: Reply with quote
Router: Netgear R8500
Kernel: Linux 4.4.233 #936 SMP Thu Aug 27 17:44:00 +04 2020 armv7l
Reset: Yes
Mode: Internet gateway and WIFI AP
Status: Working
Errors: yes, httpd dies
Uptime: 1h

just upgraded my router to Netgear R8500, I had some challenges, finally working.
httpd died couple of times, see syslog



r8500 errors.txt
 Description:
httpd dies and restarts

Download
 Filename:  r8500 errors.txt
 Filesize:  2.99 KB
 Downloaded:  26 Time(s)


_________________
Dlink 890L
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum