Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Sat Aug 15, 2020 16:46 Post subject: New Build - 08-15-2020-r44191
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
• Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
• In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
• WireGuard 1.0.20200712: PBR, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
• For Broadcom ARM devices missing 5GHz channels, via telnet/ssh: 'nvram set brcm_unlock=1' 'nvram commit' 'nvram reboot'
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Broadcom K26 is missing Build "dd-wrt.v24-xxxxx_NEWD-2_K2.6_mega-nv60k.bin"
"dd-wrt.v24-44191_NEWD-2_K2.6_mini-e3000.bin" does NOT support USB Storage. Need an E3000 build with USB Storage Support (NAS isn't needed in my configuration). _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
I Update my R7000 to the version 44191 and want to change my port4 to 100MBit. When i go to " switch config and uncheck the auto-negoiate checkbox and save, it switch back to selected ?????. I try dolfin and firefox browser but it was still the same.
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r44191 std (08/15/20)
Kernel: Linux 4.4.232 #847 SMP Sat Aug 15 08:16:41 +04 2020 armv7l
Previous: r44187
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 1hr 55mins
Temperatures: CPU 66.4 °C / WL0 46.3 °C / WL1 52.5 °C
Joined: 08 May 2018 Posts: 14246 Location: Texas, USA
Posted: Sat Aug 15, 2020 20:19 Post subject:
stupsi99 wrote:
I Update my R7000 to the version 44191 and want to change my port4 to 100MBit. When i go to " switch config and uncheck the auto-negoiate checkbox and save, it switch back to selected ?????. I try dolfin and firefox browser but it was still the same.
Did you uncheck the auto-negotiate box -and- change it to the manual config settings at the same time before clicking "save"? Keep in mind, that page does not work on all routers supported by this firmware to begin with, I don't think it's ever been fixed 100%. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Did you uncheck the auto-negotiate box -and- change it to the manual config settings at the same time before clicking "save"? Keep in mind, that page does not work on all routers supported by this firmware to begin with, I don't think it's ever been fixed 100%.[/quote]
I did
1. Uncheck auto-negotiate and save -> after refresh box checked again
2. Uncheck auto-negotiate and 1GB and save -> after autorefresh both boxes checked again.
I will try it today again with explorer and pc.
-> with explorer i got same result
Last edited by stupsi99 on Sun Aug 16, 2020 9:21; edited 1 time in total
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r44191 std (08/15/20) (prev. DD-WRT v3.0-r44112 std (08/09/20))
Kernel: Linux 4.4.232 #847 SMP Sat Aug 15 08:16:41 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 1h up, fine.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-44191_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r44191 big (08/15/20) (prev. DD-WRT v3.0-r44112 big (08/09/20))
Kernel: Linux 4.4.232 #3304 Sat Aug 15 15:08:10 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: 1.5h up, good.
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r44191 std (08/15/20)
Kernel: Linux 4.4.232 #851 Sat Aug 15 08:38:12 +04 2020 armv7l
Mode: Gateway
Previous: r44048
Reset: No
Status: OK - static dhcp, usb, samba, unbound, wifi and vap working
Aug 16 16:10:59 dd-wrt user.info : wsdd2 : windows service discovery daemon successfully stopped
Aug 16 16:10:59 dd-wrt user.err wsdd2[1083]: Terminated received.
Aug 16 16:10:59 dd-wrt user.info wsdd2[1083]: terminating.
Aug 16 16:10:59 dd-wrt user.info : ksmbd.mountd : samba daemon successfully stopped
Aug 16 16:10:59 dd-wrt local5.err ksmbd: [ksmbd-manager/1086]: ERROR: WARNING: child process exited abnormally: 1087
Aug 16 16:11:01 dd-wrt user.info : cron : daemon successfully started
Aug 16 16:11:01 dd-wrt cron.info cron[1752]: (CRON) DEATH (can't lock /var/run/crond.pid, otherpid may be 1751: Resource temporarily unavailable)
Aug 16 16:11:01 dd-wrt cron.info cron[1753]: (CRON) STARTUP (fork ok)
Aug 16 16:11:02 dd-wrt local5.info ksmbd: [ksmbd-manager/1867]: INFO: Unlink orphaned '/tmp/ksmbd.lock'
Aug 16 16:11:02 dd-wrt local5.info ksmbd: [ksmbd-manager/1870]: INFO: File '/tmp/ksmbd.lock' belongs to pid 1867
Aug 16 16:11:02 dd-wrt local5.err ksmbd: [ksmbd-manager/1870]: ERROR: Failed to create lock file: File exists
Posted: Sun Aug 16, 2020 20:16 Post subject: WRT54GSv1 WNDR4500v2 RT-N66R
Router/Version: RT-N66R
Mode: Gateway
File: dd-wrt.v24-44191_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.232 #3304 Sat Aug 15 15:08:10 +04 2020 mips
Status: 256Mb RAM is displayed and so far working well
Uptime: 1 day, 20 min
Temps: WL0 51.8 °C / WL1 50.3 °C
Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-44191_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.232 #3292 Sat Aug 15 14:53:25 +04 2020 mips
Status: Working
Uptime: 23hrs : 23min
Temps: WL0 44.6 °C / WL1 46.7 °C
Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 44154
Kernel: Linux 2.4.37 #61631 Tue Aug 11 06:59:04 +04 2020 mips
Status: Working - Incorrect build displayed flashed from 44191 broadcom folder
Uptime: 1 day, 24 min
Posted: Sun Aug 16, 2020 20:21 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r44191 std (08/15/20) Kernel: Linux 4.4.232 #847 SMP Sat Aug 15 08:16:41 +04 2020 armv7l Mode: Gateway Reset: No Previous: 08-07-2020-r44085 Status: Working so far...
