New Build - 05/20/2021 - r46716

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Thu May 20, 2021 8:45    Post subject: New Build - 05/20/2021 - r46716 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and device specific recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link does not work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r46690 (GitHub mirror)

Notes:
OpenVPN 2.5.2: Guides, Server, PBR, Reverse PBR, Client (see second post), Kill Switch, update tips, scripts and more.
WireGuard 1.0.20210219/Tools: Guides, Client, Server, Advanced, PBR, KS, update tips, scripts & more. Thanks BS & egc!
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle since r41813.
SmartDNSMiniDLNA • Unbound 1.13.1 • CoovaChilli 1.6 • Tor 0.4.5.7 • OpenSSL 1.1.1k • Dnsmasq 2.85 • Privoxy 3.0.32
In-kernel Samba (ksmbd 3.3.9+): default min/max versions changed. • WSD updateANTFS/NTFS3 kernel mode driver++.
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 (Fragattack) fixed.

Issues:
• Show us your findings with steps to reproduce, configuration, output, logs and important information below!

Important:
• For issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog, klog, serial, strace, tcpdump, wireshark etc.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL', 'iptables -t nat -vnL', 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Search SVN tickets & discuss in forum before opening. Before reporting: reset & manually set up, not restore from a backup.
• Please include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) & relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
Fonzi
DD-WRT Novice


Joined: 20 Mar 2021
Posts: 42

PostPosted: Thu May 20, 2021 15:35    Post subject: Reply with quote
WRT1900ACSv2
Coming from 46069
Config retained


Looking at it from the bright side, its quick to test these builds - and the logs don't get long.
Up 23 min, load average: 3.90, 1.35, 0.48
Kernel crash as previous builds. If anything - there now not a lot of "Mac80211 start..." <Mac-address>. This time its only one. My Galaxy S9+. Then ka-boom. So if Apples bombard the router - add Samsung to that lot too.
Argenis
DD-WRT User


Joined: 18 Feb 2019
Posts: 159

PostPosted: Fri May 21, 2021 5:02    Post subject: Reply with quote
Upgraded 3200ACM from 05/17/2021 build, no resets or anything.

DNSSEC is working fine, although so far the only two providers working in my region are OpenDNS and Adguard (that's more than enough for my use case).

So far so good, will update if there's any issues.

Apple devices are working fine.

_________________
Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled 
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled 
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled 
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled 
Radar Detection Disabled 
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 252

PostPosted: Fri May 21, 2021 13:56    Post subject: Reply with quote
Router/Version: WRT1900ACSv2 / r46716
File/Kernel: webflash / Linux 4.9.268 #2608 SMP Thu May 20 06:06:39 +07 2021 armv7l
Previous/Reset: r46690 / No
Mode/Status: Gateway, OpenVPN Client, FreeRadius Server
Issues/Errors: None! Thank You BS! Smile

Comments:

Updated using Putty SSH over wifi (curl update itself over wire) without any reset. Router has been up over 15 hours without any issues. Tested with 7 client devices including 1 on lan and 6 on wlans. Five wlans include one each for WPA3-EAP and WPA2-EAP on 5 GHz, and one each for WPA3-EAP, WPA2-EAP and WPA3-PSK/SAE on 2.4 GHz. Client devices include a Canon printer/scanner on lan, 2 Windows 10 PCs, 2 Apple devices, and 2 Android phones. One of the PCs (with an Intel AC 8265 wifi) and both of the Apple devices have MAC Randomization enabled (where I believe both Apples use a per-SSID MAC that stays the same from day to day, but the second Windows 10 PC is set to change daily and has used 3 different MACs in this test). The first Apple device is an iPad Air 2 on iOS 14.5.1, and the second Apple device is an Apple Watch 5 on watchOS 7.3.3. The Android phones are older Android 7 and 9.

In Wireless/Wireless_Security for each wlan, I have WPA Strict Rekeying set to Enable, 802.11r (FT) support set to Disable, Disable EAPOL Key Retries set to Enable, and, where applicable, 802.11w Management Frame Protection set to Auto.

No issues! Smile Attached is the log so far:

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
PIZZEDMEOFF
DD-WRT User


Joined: 12 Dec 2017
Posts: 244
Location: FL

PostPosted: Mon May 24, 2021 20:41    Post subject: Reply with quote
This build BS you got me in trouble with the wife to be! fix it!! ffs. Laughing
_________________
Downloads:
ftp site: ftp://ftp.dd-wrt.com/betas/2021
SVN Timeline:
https://svn.dd-wrt.com/timeline
Commands:
Misc: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas
samba: { sleep 30; stopservice samba3; startservice samba3; } &

WRT1900ACv1:

WIFI: 2.4ghz: NG-mixed, 20mhz channel width, channel follows AP, WPA2-CCMP-128.
WIFI: 5ghz: AC/N mixed, 40mhz channel width, channel 100+upper, WPA2-CCMP-128.
Misc Info: WPA2 Personal: "CCMP-128 (AES)" Static IP's VIA Mac+Host, SFE Enabled, No Rebind, Strict, no-resolv. NOTE: this is now just a wireless access point so to speak but all settings still apply to what ever wireless person connects.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum