Posted: Wed Jul 29, 2020 9:45 Post subject: jffs2 option support on web interface is missing
I have an Asus RT-N18U router.
I recently upgraded the old firmware from "DD_WRT v24-sp2 (01/04/15) std - build 25760" to the firmware "DD-WRT v3.0-r40559 std (08/06/19)" which is the latest one for this type of router.
Everything works good except that I do not have the option to enable the jffs2 support on the Web interface. This option is completely missing.
Before I used that option successfully and had a small html website on the router. I used the flash memory of the device and did not have any aditional storage.
After the upgrade, which I made it directly from the web interface, I have exactly the same settings as before, except everything related to the jffs2 options and settings.
Is this version of firmware DD-WRT v3.0-r40559 std (08/06/19) not supporting the jffs2 option on this type of router ?
Should I return to a previous version of firmware if I need jffs2 support? In this case what version is supporting jffs2 option ? I do not want to attach any usb device or mount external CIFS or NAS resources. I want to use as before the flash memory of the router.
Anyway, I want to thank and congratulate you for this amazing software. My router worked great 5 years without any issues. I even had uptime of 190 days.
Posted: Fri Aug 07, 2020 1:13 Post subject: Re: jffs2 option support on web interface is missing
Another option might be to add a ext2/3/4 formatted USB stick and mount it as /opt. _________________ Linksys EA8500 (Internet Gateway) - DD-WRT r44236
Netgear R6250 (Access Point) - DD-WRT r44236