New Build - 06-15-2020-r43420

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7450
Location: Texas, USA

PostPosted: Mon Jun 15, 2020 15:58    Post subject: New Build - 06-15-2020-r43420 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43397 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Sponsor
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Mon Jun 15, 2020 16:29    Post subject: Reply with quote
Router: R7000
Firmware: 05/15/2020 -r43420
Previous: 05/13/2020 -r43397
Reset: No
Uptime: about 10 minutes
Mode: AP/Gateway (Second NAT)
Issues/Errors: nothing major this far

Just flashed R7000 this morning, nothing to report other than the same issues of the 0 count for wifi and funny characters for JFFS2 info, however neither seem to affect performance. Will update if anything else shows up.
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 134

PostPosted: Mon Jun 15, 2020 17:34    Post subject: Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43420 std (06/15/20)
Mode: Gateway
Previous: r43334
Reset: Yes
Status: Bad - bootlooping

tftp recover back to r43334
Valeriy_tc
DD-WRT User


Joined: 03 Sep 2016
Posts: 58
Location: Ukraine

PostPosted: Mon Jun 15, 2020 17:48    Post subject: Linksys EA6400 Reply with quote
Router/Version: Linksys EA6400
Mode: Gateway/AP
Firmware: DD-WRT v3.0-r43420 std (06/15/20)
Kernel: Linux 4.4.227 #356 SMP Mon Jun 15 07:43:14 +04 2020 armv7l
Previous: DD-WRT v3.0-r43381 std (06/10/20)
Reset: No.
Status: Working.

Flashed from GUI. Syslog is below.
Jan 1 02:00:12 LINKSYS daemon.info mstpd[649]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:12 LINKSYS daemon.info mstpd[649]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 10
Jan 1 02:00:21 LINKSYS user.err wsdd2[1153]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jun 15 20:43:07 LINKSYS user.err wsdd2[1153]: Terminated received.
Jun 15 20:43:07 LINKSYS local5.err ksmbd: [ksmbd-manager/1158]: ERROR: WARNING: child process exited abnormally: 1160
Jun 15 20:43:11 LINKSYS local5.err ksmbd: [ksmbd-manager/1935]: ERROR: Failed to create lock file: File exists
Jun 15 20:43:11 LINKSYS local5.err ksmbd: [ksmbd-manager/1957]: ERROR: Failed to create lock file: File exists
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 418

PostPosted: Mon Jun 15, 2020 19:07    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43420 std (06/15/20)
Kernel: Linux 4.4.227 #356 SMP Mon Jun 15 07:43:14 +04 2020 armv7l
Previous: r43397
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 1hr 24mins
Temperatures: CPU 62.5 °C / WL0 45.0 °C / WL1 50.9 °C
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 58
Location: France

PostPosted: Mon Jun 15, 2020 20:26    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.227 #358 SMP Mon Jun 15 07:58:55 +04 2020 armv7l
Previous/Reset: r43397/no
Mode/Status: Gateway/Router/2.4GHz & 5GHz AP/Gateway/Openvpn server/Wireguard server
Issues/Errors:
    USB "Run-on-mount Script" (usb_runonmount) is not executed (hasn't - at least - since 42910
    Code:

    Jan  1 01:00:07 archy kern.err kernel: nflash: found no supported devices
    Jan  1 01:00:07 archy kern.err kernel: brcmnand: found no supported devices
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:07 archy daemon.info mstpd[616]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jan  1 01:00:08 archy daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
    Jun 15 22:20:05 archy kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)


Question : Is it normal to have 2 dropbear isntances running ?
Code:
>ps  | grep dropbear
  888 root     dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -a
 2235 root     dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -a

I looked at running processes because cpu usage seemed high compared to usual
tinkeruntilitworks
Guest





PostPosted: Mon Jun 15, 2020 20:44    Post subject: Reply with quote
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.227 #361 SMP Mon Jun 15 08:13:11 +04 2020 armv7l
Previous/Reset: r43397 / yes
Mode/Status: Gateway AP 2.4GHz 5GHz Unbound JFFS2 / working
Issues/Errors: no issues / jffs2 strange characters
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 181

PostPosted: Mon Jun 15, 2020 21:42    Post subject: E1200v2 Reply with quote
Router/Version: E1200v2
File/Kernel: dd-wrt.v24-43420_NEWD-2_K3.x_mega-nv64k.bin
Previous/Reset: 43397 no reset
Mode/Status: Working
Issues/Errors: This build did not show the hang as the previous two builds. I have included the logs from the power cycle recommended by KernelPanic in the previous build thread. I have not seen the httpd error since updating to this build but the night is young.



SyslogCatchAll-2020-06-15.txt
 Description:

Download
 Filename:  SyslogCatchAll-2020-06-15.txt
 Filesize:  67.75 KB
 Downloaded:  76 Time(s)


_________________
Buffalo WZR-600DHP 43516 std
Asus RT-N66R 43516 big
Netgear WNDR4500v2 43516 mega
Linksys WRT-54GSv1 43516 std
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7450
Location: Texas, USA

PostPosted: Mon Jun 15, 2020 22:04    Post subject: Reply with quote
I would venture to say that the page allocation issue in your logs is related to using a Chromium-based browser or some add-on/extension to the browser OR not. I have not noticed this log entry on my E4200, but will keep an eye out. I will forward this log as well to see what BrainSlayer says.
_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 104

PostPosted: Mon Jun 15, 2020 23:50    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43420 std (06/15/20)
Kernel Version: Linux 4.4.227 #363 SMP Mon Jun 15 08:30:15 +04 2020 armv7l
Drivers: Experimental
Reset: no
Upgraded: via webgui
Mode: AP/Gateway
Status: dhcp server enabled, wifi 2.4 Ghz, wireguard, nas, samba, usb working
Previous: DD-WRT v3.0-r43381 std (06/10/20)
Observation: the audio level on the samba is up, proper, thanks
Issues: could not get vap to work. After removing it, I could not access dd-wrt via url but could ping it and it responded, lost internet access. Hard rebooted the router.
Errors: as shown below by syslog



Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1129]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 20:00:19 DD-WRT local5.err ksmbd: [ksmbd-worker/1129]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 20:00:19 DD-WRT user.err wsdd2[1122]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Jun 15 19:35:55 DD-WRT user.err wsdd2[1122]: Terminated received.
Jun 15 19:35:55 DD-WRT local5.err ksmbd: [ksmbd-manager/1128]: ERROR: WARNING: child process exited abnormally: 1129
Jun 15 19:35:56 DD-WRT local5.err ksmbd: [ksmbd-worker/1921]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Jun 15 19:35:56 DD-WRT local5.err ksmbd: [ksmbd-worker/1921]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Jun 15 19:35:58 DD-WRT local5.err ksmbd: [ksmbd-manager/2137]: ERROR: Failed to create lock file: File exists
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 129

PostPosted: Tue Jun 16, 2020 1:19    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.227 #356 SMP Mon Jun 15 07:43:14 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43397 std (06/13/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
phuklok1
DD-WRT Novice


Joined: 21 May 2020
Posts: 6

PostPosted: Tue Jun 16, 2020 2:37    Post subject: Reply with quote
Router Model: Asus RT-AC1900P
Firmware Version: DD-WRT v3.0-r43420 std (06/15/20)
Kernel Version: Linux 4.4.227 #363 SMP Mon Jun 15 08:30:15 +04 2020 armv7l
Reset: no
Upgraded: via webgui
Mode: Wireless CLient
Status: dhcp server enabled, wifi 5 Ghz only, QOS, nas, samba, usb working,
Issues: Front panel Ethernet and power indicators work fine, but wireless indicators do not light up.

possible samba issue:
during attempt to download file via smb from client device, all further access via SMB to router was blocked from all devices. Following errors in log:

syslog:
Jun 17 17:17:18 cable local5.err ksmbd: [ksmbd-worker/24500]: ERROR: Recv() error Invalid input data or parameter [-7]
Jun 17 17:17:18 cable local5.err ksmbd: [ksmbd-manager/24498]: ERROR: WARNING: child process exited abnormally: 24500
Jun 17 17:17:18 cable local5.err ksmbd: [ksmbd-manager/24498]: ERROR: Fatal IPC error. Terminating. Check dmesg.

dmesg:
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: extract_last_component:50: Invalid path /
ksmbd: __rpc_method:85: Unsupported RPC: lsarpc
ksmbd: create_smb2_pipe:1805: Unable to open RPC pipe: -22
ksmbd: __rpc_method:85: Unsupported RPC: mdssvc
ksmbd: create_smb2_pipe:1805: Unable to open RPC pipe: -22
ksmbd: __rpc_method:85: Unsupported RPC: lsarpc
ksmbd: create_smb2_pipe:1805: Unable to open RPC pipe: -22
ksmbd: kill command received
ksmbd: handle_startup_event:360: Server reset is in progress, can't start daemon
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers i.
ksmbd: kill command received
ksmbd: handle_startup_event:360: Server reset is in progress, can't start daemon

Thanks for supporting the 1900P!


Last edited by phuklok1 on Wed Jun 17, 2020 21:24; edited 1 time in total
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1598
Location: Canada

PostPosted: Tue Jun 16, 2020 3:58    Post subject: Reply with quote
1) E3000 - WireGuard Travel Router
-WL0 - Client Mode
-WL1 - AP Mode
-2xVLANs + 2xBridges
-Dnsmasq
-Telnet
-Syslog
-NTP server left blank
-TCP Congestion - hybla
-WireGuard Client (Enabled Policy Based Routing & Firewall Inbound)
-Custom Startup,Firewall Scripts
-USB Disabled
-SFE Enabled
-ttraff Disabled
-Overclocked 533Mhz

Firmware: DD-WRT v3.0-r43420 mega (06/15/20) [from: DD-WRT v3.0-r43334 mega (06/04/20)]
Linux Rel: Linux 4.4.227 #1844 Mon Jun 15 mips [from: Linux 4.4.226 #1622 Thu Jun 4 mips]
WireGuard: WireGuard 1.0.20200611 loaded
Reset: NO
Status & Uptime: Working / Tested over 7 hours
Issues/Fixes: none / none
Tests: WireGuard throughput over Dual-WiFi +25Mbps-Down / +20Mbps-Up

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44483 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44483 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r44483 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r44483 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
otyg
DD-WRT Novice


Joined: 18 Nov 2015
Posts: 43

PostPosted: Tue Jun 16, 2020 9:09    Post subject: Reply with quote
Router/Version: Linksys (Cisco) EA6500 V1
File/Kernel: Linux 4.4.225 #1576 Tue Jun 2 13:27:31 +04 2020 mips
Previous/Reset: r43324 giga / yes (tried dirty and reset)
Mode/Status: Bootloop
Issues/Errors: Appears to bootloop, doesn't boot up cannot access ip/ssh/telnet/web, clearing NVRAM seems to have no effect or work, had to flash back r43324 with tftpd

Currently dont have a serial tty adapter, I can't provide more info.

r43324 - works (one or more of the ten commits after this caused the issue)
r43334 - bootloop
r43381 - bootloop
r43420 - bootloop Sad
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 252

PostPosted: Tue Jun 16, 2020 11:44    Post subject: Reply with quote
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r43420 std (06/15/20)
Kernel: Linux 4.4.227 #363 SMP Mon Jun 15 08:30:15 +04 2020 armv7l
Previous: DD-WRT v3.0-r43392 std (06/12/20)
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: Yes. PPTP will not connect from the Internet (WAN) to the PPTP server, but will connect from the LAN. Not sure which release this started as it’s seldom used. Below is the syslog output when it does not connect from the WAN.

SYSLOG
Jun 16 05:29:59 Idaho daemon.info pptpd[10550]: CTRL: Client 50.37.210.47 control connection started
Jun 16 05:29:59 Idaho daemon.info pptpd[10550]: CTRL: Starting call (launching pppd, opening GRE)
Jun 16 05:29:59 Idaho daemon.notice pppd[10551]: pppd 2.4.8 started by root, uid 0
Jun 16 05:29:59 Idaho daemon.debug pppd[10551]: using channel 33
Jun 16 05:29:59 Idaho daemon.info pppd[10551]: Using interface ppp0
Jun 16 05:29:59 Idaho daemon.notice pppd[10551]: Connect: ppp0 <--> /dev/pts/0
Jun 16 05:29:59 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:02 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:05 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:08 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:11 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:14 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:17 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:20 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:23 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:26 Idaho daemon.debug pppd[10551]: sent [LCP ConfReq id=0x1 <mru 1436> <asyncmap 0x0> <auth chap MS-v2> <magic 0xc207b7c> <pcomp> <accomp>]
Jun 16 05:30:29 Idaho daemon.warn pppd[10551]: LCP: timeout sending Config-Requests
Jun 16 05:30:29 Idaho daemon.notice pppd[10551]: Connection terminated.
Jun 16 05:30:29 Idaho daemon.notice pppd[10551]: Modem hangup
Jun 16 05:30:29 Idaho daemon.info pppd[10551]: Exit.
Jun 16 05:30:29 Idaho daemon.err pptpd[10550]: GRE: read(fd=6,buffer=26470,len=8196) from PTY failed: status = -1 error = I/O error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
Jun 16 05:30:29 Idaho daemon.err pptpd[10550]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7)
Jun 16 05:30:29 Idaho daemon.debug pptpd[10550]: CTRL: Reaping child PPP[10551]
Jun 16 05:30:29 Idaho daemon.info pptpd[10550]: CTRL: Client 50.37.210.47 control connection finished

_________________
Asus AC87U A1 - DD-WRT v3.0-r43217 std (05/22/20)
Repeater Bridges(s)
Asus AC68R A1 - DD-WRT v3.0-r43217 std (05/22/20)
Netgear R6400 V2 - DD-WRT v3.0-r43136 std (05/13/20)
Asus AC66U A1 - DD-WRT v3.0-r43136 giga (05/13/20)
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum