Beamforming. Also should probably change your ack back to the old default of 2000, if not something else.
all beamforming settings do nothing for me, i never noticed any change honestly in performance or stability when i change them. same for ACK timing, i do not notice a difference between 500 and 2000 but i am mostly using wifi indoors so not sure if it will make a difference for others. its worth mentioning that the 5GHz coverage of R7000P is much much better than that of the R6700v3 when both are put in the same location (not at the same time for sure).
I have a similar experience with my R7000P. if i leave everything default with the exception of using 80 width i get the same performance if i use recommended settings. my isp is only 100 down 10 up though. i can only get about 60 down on 2.4 though
Joined: 16 Mar 2019 Posts: 131 Location: Szczecin, Poland EU
Posted: Wed Jun 03, 2020 22:38 Post subject: New Build - 06/02/2020 - r43324
Router/Version: Netgear WNR3500L v2
File/Kernel: Linux 4.4.225 #1576 Tue Jun 2 13:27:31 +04 2020 mips
Previous/Reset: update via ssh from build Jun 1, 2020
Mode/Status: Internet gateway and WIFI AP, working good
Issues/Errors: some warnings, but device work
Uptime: ->2 hours
I'm update device via ssh. I don't see issues. Router work rather good.
Router/Version: Netgear R7000P
File/Kernel: netgear-r7000p-webflash.bin / Linux 4.4.225 #301 SMP Tue Jun 2 08:39:15 +04 2020 armv7l
Previous/Reset: r43320 / yes
Mode/Status: Gateway AP 2.4GHz 5GHz Unbound JFFS2 / working
Issues/Errors: i haven't noticed any issues but somethings off with the size value. it was previous 48mb jffs2 size. now it shows slightly larger.
Posted: Mon Jun 08, 2020 23:04 Post subject: sus RT-AC3200
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r43324 std (06/02/20)
Previus: DD-WRT v3.0-r43266 std (05/27/20)
Kernel: Linux 4.4.225 #301 SMP Tue Jun 2 08:39:15 +04 2020 armv7l
Services: SAMBA, FTP.
Wifi: 2.4/5.0Ghz working.
CPU Load Average is showing 100%.
Leds from wifi 2.4 and 5.0Ghz is bright them the lan ports.
Some small issues happened since last update.
rt-ac3200 kern.warn kernel: conntrack: generic helper won't handle protocol 47. Please consider loading the specific helper module.
I general is stable.
Nice work guys. _________________ RT-AC68U
Firmware: DD-WRT v3.0-r43334 mega (06/04/20) [from: DD-WRT v3.0-r43306 mega (05/31/20)]
Linux Rel: Linux 4.4.226 #1622 Thu Jun 4 [from: Linux 4.4.225 #1532 Sun May 31 mips]
WireGuard: WireGuard 1.0.20200520 loaded
Status & Uptime: Working / Tested about a 1 day
WireGuard throughput over Dual-WiFi (2.4Ghz-AP)<wifi>(WireGuard-E3000)<wifi>(5Ghz-Client): +25Mbps-Down / +20Mbps-Up
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r44340 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r44340 Std
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r44112 Std
WRT610Nv1 - Client Bridge - DDWRT r33679 Mega K2.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r43217 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
File/Kernel: DD-WRT v3.0-r43324 std (06/02/20)
Previous/Reset: First build using ddwrt
Mode/Status: WIFI AP, working somewhat ok
Issues/Errors: Some clients (iphone and laptop running ubuntu 20.04.1) get disconnected and lose connection. Usually it's a dnsmasq/resolving timeout issue. I have local resolver on separate wired machine. I sometimes have to disconnect/reconnect client to router to get anything to work.
Uptime: 21 hours _________________ [ NetGear R7000 : DD-WRT v3.0-r44340 std (09/10/20) ]