New Build - 05/31/2020 - r43306

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1265

PostPosted: Sun May 31, 2020 12:31    Post subject: New Build - 05/31/2020 - r43306 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (try another if a link doesn't work)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r43290 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken at 40571, then fixed in build r40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle. 6920, 6928, 6931, 6932 (WIP 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
• Broadcom MIPS devices are now on kernel 4.4. N66U/AC66U half memory is fully resolved.
• Local DNS option removed from Services->DNSMasq in changesets 43080 and 43081; ref: #7092
• DHCP and DNS help (English) updated in 43083; ref: #7091
• WAN lease time approaching zero bug on WRT54* devices fixed in 43191; ref: #6456
• Images for WNR3500Lv2 (BRCM NAND flash crash bug) fixed in 43219 (43217); ref: #7098
WireGuard: Policy Based Routing, Kill Switch, Inbound Firewall, Naming of Peers, Status, Key, Guides. Thanks egc!

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives, search).
If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').

Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 61

PostPosted: Sun May 31, 2020 13:01    Post subject: Asus RT-AC68U Reply with quote
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r43306 std (05/31/20)
Previus:asus_rt-ac68u-firmware-r43136
Status: not working properly.
Mode: Gateway
Reset: No
Services: NordVPN w/ openvpn client, SAMBA, FTP.
Wifi: 2.4/5.0Ghz are Ok no issues.
SAMBA still unstable after connect and try to get iside of the folder the connection was lost.
Back to version asus_rt-ac68u-firmware-r43136.

dmesg
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 111, io mem 0x18022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:0c.0: xHCI Host Controller
xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:0c.0: hcc params 0x02501164 hci version 0x100 quirks 0x00000010
hub 3-0:1.0: USB hub found
hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci_hcd 0000:00:0c.0: xHCI Host Controller
xhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
SCSI subsystem initialized
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb-storage 4-1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 4-1:1.0
usbcore: registered new interface driver usb-storage
scsi 0:0:0:0: Direct-Access Seagate Expansion 9300 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sda: sda1
sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16).
sd 0:0:0:0: [sda] Attached SCSI disk
ksmbd: kill command received
EXT4-fs (sda1): Ignoring removed nobh option
EXT4-fs (sda1): barriers disabled
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 61

PostPosted: Sun May 31, 2020 13:15    Post subject: Asus RT-AC3200 Reply with quote
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r43306 std (05/31/20)
Previus: DD-WRT v3.0-r43266 std (05/27/20)
Kernel: Linux 4.4.225 #287 SMP Sun May 31 07:36:39 +04 2020 armv7l
Status: working
Mode: Gateway
Reset: No
Services: SAMBA, FTP.
Wifi: 2.4/5.0Ghz working.
CPU issue fixed was showing 100%.
Leds from wifi 2.4 and 5.0Ghz is bright them the lan ports, any reason why?
Some messagens also was present since last update.

May 31 10:07:56 rt-ac3200 user.err : usbipd: error: socket: :::3240: 97 (Address family not supported by protocol)

May 31 10:08:01 rt-ac3200 kern.warn kernel: EXT4-fs (sda1): Ignoring removed nobh option

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 180

PostPosted: Sun May 31, 2020 15:29    Post subject: WRT54GSv1 Reply with quote
Router/Version: WRT54GSv1
Mode: AP/Switch/Router
File: dd-wrt.v24_mega_generic.bin build 43290
Kernel: Linux 2.4.37 #60455 Wed May 20 06:56:31 +04 2020 mips
Status: Still shows build 43195 with no change in the Kernel
Uptime: 15 min

Attached what logs I can capture.



FlashLog.txt
 Description:

Download
 Filename:  FlashLog.txt
 Filesize:  29 KB
 Downloaded:  19 Time(s)


_________________
Buffalo WZR-600DHP 43516 std
Asus RT-N66R 43516 big
Netgear WNDR4500v2 43516 mega
Linksys WRT-54GSv1 43516 std
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 92

PostPosted: Sun May 31, 2020 16:03    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43306 std (05/31/20)
Kernel Version: Linux 4.4.225 #289 SMP Sun May 31 07:53:20 +04 2020 armv7l
Drivers: Experimental
Mode: AP
Previous: DD-WRT v3.0-r43290 std (05/29/20)
Upgraded: via webgui
Status: 2.4 Ghz, dhcp server enable, wireguard, working
Issues: none
Uptime: 27 min
Load Average: 0.33, 0.33, 0.26
Temperatures: CPU 49.7 °C
Errors: According to the syslog


Dec 31 20:00:10 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 20:00:13 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
May 31 11:51:15 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
May 31 11:51:15 DD-WRT kern.err kernel: brcmfmac: brcmf_cfg80211_dump_survey: cca_get_stats failed (-52)
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Sun May 31, 2020 16:17    Post subject: Reply with quote
Router: Nighthawk R7000
Firmware: 05/31/2020 -r43306
Kernel: Linux 4.4.225 #282 SMP Sat May 30 11:05:59 +04 2020 armv7l
Previous: 05/27/2020: r-43266
Mode: Gateway/AP
Reset: No
Uptime: 1hour and 15 minutes
Issues/Errors none to report

Flashed today without issues. Will update post if problems show up.
dwardo
DD-WRT Novice


Joined: 07 Feb 2013
Posts: 43
Location: France

PostPosted: Sun May 31, 2020 19:29    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.225 #284 SMP Sun May 31 07:24:13 +04 2020 armv7l
Previous/Reset: r43290/no
Mode/Status: Gateway/Router/2.4GHz & 5GHz AP/Gateway/Openvpn server/Wireguard server
Issues/Errors: USB "Run-on-mount Script" (usb_runonmount) is not executed (hasn't - at least - since 42910

Jan 1 01:00:07 archy kern.err kernel: nflash: found no supported devices
Jan 1 01:00:07 archy kern.err kernel: brcmnand: found no supported devices
Jan 1 01:00:07 archy daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[614]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 01:00:07 archy daemon.info mstpd[614]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
May 31 21:11:51 archy kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
turbowells
DD-WRT User


Joined: 14 Sep 2019
Posts: 157
Location: Maine, USA

PostPosted: Sun May 31, 2020 19:50    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43306_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43306 mega (05/31/20)
Kernel: Linux 4.4.225 #1532 Sun May 31 12:28:45 +04 2020 mips
Mode: AP/USB
Previous: 43290
Reset?: N
Status: Working

Router/Version: Asus RT-N12D
File: dd-wrt.v24-43306_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43306 mega (05/31/20)
Kernel: Linux 4.4.225 #1532 Sun May 31 12:28:45 +04 2020 mips
Mode: Gateway/OpenVPN client
Previous: 43290
Reset?: N
Status: Working

Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Status: Still version 43195, file hash is not changing

Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43306_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43306 mega (05/31/20)
Kernel: Linux 4.4.225 #1532 Sun May 31 12:28:45 +04 2020 mips
Mode: Gateway/USB
Previous: 43290
Reset?: N
Status: Working

Flashed from gui. Syslogs clean. Up one hour.
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 398

PostPosted: Sun May 31, 2020 21:56    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43306 std (05/31/20)
Kernel: Linux 4.4.225 #282 SMP Sat May 30 11:05:59 +04 2020 armv7l
Previous: r43290
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 1hr 10min
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 50.5 °C
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 180

PostPosted: Sun May 31, 2020 22:18    Post subject: WNDR4500v2 RT-N66R Reply with quote
Router/Version: RT-N66R
Mode: AP/Switch/Router
File: dd-wrt.v24-43306_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.225 #1468 Fri May 29 13:10:25 +04 2020 mips
Status: Only displays 128Mb not 256Mb... otherwise working
Uptime: 19 min
Temps: WL0 52.3 °C / WL1 50.6 °C

Router/Version: WNDR4500v2
Mode: AP/Switch/Router
File: dd-wrt.v24-43306_NEWD-2_K3.x_giga-WNDR4500V2.bin
Kernel: Linux 4.4.225 #1516 Sun May 31 12:10:22 +04 2020 mips
Status: Working
Uptime: 6:40
Temps: WL0 44.4 °C / WL1 44.3 °C



FlashLog.txt
 Description:

Download
 Filename:  FlashLog.txt
 Filesize:  34.87 KB
 Downloaded:  17 Time(s)


_________________
Buffalo WZR-600DHP 43516 std
Asus RT-N66R 43516 big
Netgear WNDR4500v2 43516 mega
Linksys WRT-54GSv1 43516 std
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 100

PostPosted: Mon Jun 01, 2020 5:20    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.225 #282 SMP Sat May 30 11:05:59 +04 2020 armv7l
Previous/Reset: DD-WRT v3.0-r43290 std (05/29/20) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 124

PostPosted: Mon Jun 01, 2020 10:58    Post subject: Reply with quote
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r43306 std (05/31/20)
Kernel: Linux 4.4.225 #286 Sun May 31 07:30:16 +04 2020 armv7l
Mode: Gateway
Previous: r43055
Reset: Yes
Status: bad
Accessing Samba share will cause instant reboot.
Didn't have chance to check further, reverted to 43055 and all is fine. Will test again for upcoming builds.


Last edited by rnix on Mon Jun 01, 2020 22:38; edited 1 time in total
Zyxx
DD-WRT User


Joined: 28 Dec 2018
Posts: 219

PostPosted: Mon Jun 01, 2020 10:58    Post subject: Reply with quote
Router/Version: Netgear R7000
File: netgear-r7000-webflash.bin
Firmware: DD-WRT v3.0-r43306 std (05/31/20) (prev. DD-WRT v3.0-r43290 std (05/29/20))
Kernel: Linux 4.4.225 #282 SMP Sat May 30 11:05:59 +04 2020 armv7l
Mode: Gateway, Wifi disabled, Wireguard for external access, WAN to DSL
Reset: No
Status: 12h up, everything fine.


Router/Version: Asus RT-N66U
File: dd-wrt.v24-43306_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r43306 big (05/31/20) (prev. DD-WRT v3.0-r43290 big (05/29/20))
Kernel: Linux 4.4.225 #1528 Sun May 31 12:24:13 +04 2020 mips
Mode: Gateway, Wifi disabled, Wireguard Endpoint for external VPS, connected via DHCP WAN to WRT1900ACS v2
Reset: No
Status: Working as intended, 4h up.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 5896
Location: Netherlands

PostPosted: Mon Jun 01, 2020 12:49    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T30_NETGEAR

Firmware Version: DD-WRT v3.0-r43306 Community Build (06/01/20)
Kernel Version: Linux 4.4.225 #1 SMP Mon Jun 1 12:56:25 CEST 2020 armv7l

Upgraded from: DD-WRT v3.0-r43290 std (05/29/20)
Reset: No not this time

Status: Up and running for 8 hours, basic setup as Gateway, static leases, OpenVPN client (on PIA) with Policy Based Routing up and running, 2,4GHz, 5Ghz USB storage NAS working with possible errors.
WireGuard server with 6 peers working.

Errors:
1. DNS leak see: http://svn.dd-wrt.com/ticket/6020, https://svn.dd-wrt.com/ticket/6908
2. On earlier builds I could not save to an NTFS partition (wrong parameter), when I tried it on this build I could save but then I had a spontaneous reboot when accessing my ntfs partition, could be because I build this myself so cannot draw any conclusions, but I used the official repo.

Otherwise build is fine


Big Thanks to BS!!

_________________
Routers:Netgear R7800, Netgear R6400v1, Netgear R6400v2, Linksys EA6900 (XvortexCFE), Linksys E2000 (converted WRT320N), WRT54GS v1.
OpenVPN Policy Based Routing guide: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=321686
Install guide R6400v2:http://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
OpenVPN Server Setup:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=318795
Install guide R7800: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Wireguard server setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1183135
Wireguard client setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324624
Wireguard Advanced setup guide:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324787
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 122
Location: Szczecin, Poland EU

PostPosted: Mon Jun 01, 2020 17:26    Post subject: New Build - 05/31/2020 - r43306 Reply with quote
Router/Version: Netgear WNR3500L v2
File/Kernel: Linux 4.4.225 #1516 Sun May 31 12:10:22 +04 2020 mips
Previous: Original build from May 29,2020
Mode/Status: Internet gateway and wifi AP
Issues/Errors: see below
Reset:No
Uptime: -> 23h

I'm updated router via ssh. I don't see any problems after flash. Some problems are listed in quote. Device working for me.

Quote:
Jan 1 01:00:16 Myrouter kern.warn kernel: Found a AMD NAND flash with 2048B pages or 128KB blocks; total size 128MB
Jan 1 01:00:16 Myrouter kern.warn kernel: Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Jan 1 01:00:16 Myrouter kern.warn kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Jan 1 01:00:16 Myrouter kern.warn kernel: PCI: no core
Jan 1 01:00:16 Myrouter kern.warn kernel: PCI: no core
Jan 1 01:00:16 Myrouter kern.warn kernel: PCI: Fixing up bridge
Jan 1 01:00:16 Myrouter kern.warn kernel: PCI: Fixing up bus 0
Jan 1 01:00:16 Myrouter kern.err kernel: pflash: found no supported devices
Jan 1 01:00:16 Myrouter kern.warn kernel: ERROR: Unknown flash, device_id:0x00
Jan 1 01:00:16 Myrouter kern.err kernel: bcmsflash: found no supported devices
Jan 1 01:00:16 Myrouter kern.warn kernel: Boot partition size = 524288(0x80000)
Jan 1 01:00:16 Myrouter kern.warn kernel: lookup_nflash_rootfs_offset: offset = 0x500000
Jan 1 01:00:16 Myrouter kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Jan 1 01:00:16 Myrouter kern.warn kernel: nf_nat_rtsp v0.7 loading
Jan 1 01:00:16 Myrouter kern.warn kernel: et: module license 'Proprietary' taints kernel.
Jan 1 01:00:16 Myrouter kern.warn kernel: Disabling lock debugging due to kernel taint
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: passivemode set to 0x0
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: txworkq set to 0x0
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: et_txq_thresh set to 0xce4
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Jan 1 01:00:16 Myrouter kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Jan 1 01:00:16 Myrouter kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
May 31 20:11:01 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 20:11:02 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 20:11:03 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 20:11:03 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 20:11:04 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
May 31 23:55:49 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 23:55:49 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 23:55:51 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 23:55:51 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
May 31 23:55:51 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Jun 1 19:09:21 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jun 1 19:09:21 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jun 1 19:09:24 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jun 1 19:09:24 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Jun 1 19:09:24 Myrouter daemon.err httpd[1432]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum