Posted: Tue May 19, 2020 16:08 Post subject: New Build - 05/19/2020 - r43192
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware. 6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives, search).
• If start-up scripts do not work from USB add a delay (e.g. wait script or 'sleep 25').
Important:
• If reporting issues provide applicable info: 'dmesg', 'cat /tmp/var/log/messages', syslog/serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with relevant configuration information.
Joined: 18 Jul 2017 Posts: 45 Location: Wisconsin, USA
Posted: Tue May 19, 2020 16:24 Post subject: EA6500 V1
Router/Version: Linksys EA6500 v1
Firmware: DD-WRT v3.0-r43192 giga (05/19/20)
Kernel: Linux 4.4.223 #1195 Tue May 19 14:15:42 +04 2020 mips
Previous: DD-WRT v3.0-r43171 std (05/16/20)
Mode/Status: Gateway/AP
Reset: No
Issues/Errors: None so far
It's been awhile since I've posted. Just been lurking, silently upgrading on every release. I must say last build was a bit flaky. At first it seemed my unit was boot looping but when I was trying to recover via TFTP it happened to boot up so i just let it run even restarted twice after that with no issues but with this build it loaded right up right away. _________________
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Tue May 19, 2020 17:07 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43192_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 4.4.223 #1211 Tue May 19 14:35:46 +04 2020 mips
Mode: AP/USB
Previous: r43171
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43192_NEWD-2_K3.x_mega.trx
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 4.4.223 #1211 Tue May 19 14:35:46 +04 2020 mips
Mode: Router/OpenVPN client
Previous: r43136
Reset?: N
Status: Working
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 2.4.37 #60435 Tue May 19 07:09:38 +04 2020 mips
Mode: Router/USB
Previous: r43136
Reset?: N
Status: Working-USB not mounting
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43192_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 4.4.223 #1211 Tue May 19 14:35:46 +04 2020 mips
Mode: Router/USB
Previous: r43136
Reset?: N
Status: Working
Router/Version: RT-AC87U A1
File: asus_rt-ac87u-firmware.trx
Firmware: DD-WRT v3.0-r43192 std (05/19/20)
Kernel: Linux 4.4.223 #169 SMP Tue May 19 09:10:16 +04 2020 armv7l
Previous: DD-WRT v3.0-r43171 std (05/16/20)
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DNSMasq, Port Forwarding, USB, NAS, NTP TimeSync, and Wake-on-WAN(internet)
Issues/Errors: OK
Router/Version: RT-AC68R A1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r43192 std (05/19/20)
Kernel: Linux 4.4.223 #162 SMP Tue May 19 08:27:11 +04 2020 armv7l
Previous: DD-WRT v3.0-r43171 std (05/16/20)
Mode/Status: Repeater Bridge 5Ghz (AC Only)/Ok
Reset: No
Issues/Errors: OK
Router/Version: R6400 V2 (board_id=U12H332T30_NETGEAR)
File: netgear-r6400v2otp-webflash.bin
Firmware: DD-WRT v3.0-r43192 std (05/19/20)
Kernel: Linux 4.4.223 #162 SMP Tue May 19 08:27:11 +04 2020 armv7l
Previous: DD-WRT v3.0-r43171 std (05/16/20)
Mode/Status: Repeater Bridge 5Ghz (AC Only) /OK
Reset: No
Issues/Errors: OK
Router/Version: RT-AC66U A1
File: dd-wrt-43192-Asus_RT-AC66U.trx
Firmware: DD-WRT v3.0-r43192 giga (05/19/20)
Kernel: Linux 4.4.223 #1195 Tue May 19 14:15:42 +04 2020 mips
Previous: DD-WRT v3.0-r43171 giga (05/16/20)
Mode/Status: Repeater Bridge 5Ghz (AC Only)/Ok
Reset: No
Issues/Errors: OK
Router/Version: E4200 V1
File: dd-wrt.v24-43192_NEWD-2_K3.x_mega-e4200.bin
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 4.4.223 #1211 Tue May 19 14:35:46 +04 2020 mips
Previous: DD-WRT v3.0-r43136 mega (05/13/20)
Mode/Status: Repeater Bridge 5Ghz (N-Only 5 GHz) /OK
Reset: No
Issues/Errors: OK
Router/Version: E2000 V1
File: dd-wrt.v24-43192_NEWD-2_K3.x_mega-e2000.bin
Firmware: DD-WRT v3.0-r43192 mega (05/19/20)
Kernel: Linux 4.4.223 #1211 Tue May 19 14:35:46 +04 2020 mips
Previous: DD-WRT v3.0-r43136 mega (05/13/20)
Mode/Status: Repeater Bridge (Requires VAP with different SSID because single radio 2.4Ghz) /OK
Reset: No
Issues/Errors: OK
NOTE: The only RB with a VAP is the E2000 _________________ Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43192 std (05/19/20)
Kernel: Linux 4.4.223 #162 SMP Tue May 19 08:27:11 +04 2020 armv7l
Previous: r43171
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 38min
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 50.6 °C
Router/Version: Asus RT-AC68U / asus_rt-ac68u-firmware.trx
Version Flashed: DD-WRT v3.0-r43192 std (05/19/20)
Previous Version: DD-WRT v3.0-r42681 std (03/13/20)
Reset: No
Mode/Status: AP - both 2.4Ghz and 5Ghz
Issues/Errors: Working fine so far.
Router/Version: Asus RT-AC68U / asus_rt-ac68u-firmware.trx
Version Flashed: DD-WRT v3.0-r43192 std (05/19/20)
Previous Version: DD-WRT v3.0-r43136 std (05/13/20)
Reset: No
Mode/Status: Client Bridge
Issues/Errors: Working fine so far. _________________ ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
Asus RT-N66U: nested gateway for testing
Flash: big trx file via GUI, no reset
Kernel: Linux 4.4.223 OpenWrt GCC 10.1.0 r13225-bc0288b768 #1207 Tue May 19 14:31:18 +04 2020
Status: Just verifying that highmem is still working, and it is:
Router Model: Netgear R6250
Firmware Version: DD-WRT v3.0-r43192 std (05/19/20)
Kernel Version: Linux 4.4.223 #162 SMP Tue May 19 08:27:11 +04 2020 armv7l
Uptime: 13 min
Previous: DD-WRT v3.0-r43171 (05/16/20)
Upgrade: webgui
Mode: AP
Reset: no
Status: 2.4 ghz, samba, usb and nas working
Issue: none
Errors: as shown below from syslog
May 19 20:58:52 DD-WRT user.err wsdd2[1544]: Terminated received
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43192 std (05/19/20)
Kernel Version: Linux 4.4.223 #169 SMP Tue May 19 09:10:16 +04 2020 armv7l
Previous: DD-WRT v3.0-r43171 (05/16/20)
Upgrade: webgui
Mode: AP
Reset: no
Status: wifi 2.4 ghz, openvpn client, dhcp working
Drivers: experimental
Issues: none
Errors: as shown in the syslog extract below
May 19 19:32:53 DD-WRT daemon.err httpd[1190]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
May 19 19:36:27 DD-WRT daemon.err httpd[1190]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
May 19 21:19:23 DD-WRT daemon.err httpd[1190]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
May 19 21:23:28 DD-WRT kern.err kernel: ieee80211 phy1: brcmf_netdev_wait_pend8021x: Timed out waiting for no pending 802.1x packets
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Wed May 20, 2020 11:21 Post subject: DD-WRT BS build 43192 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r43192 std (05/19/20)
Kernel: Linux 4.4.223 #166 Tue May 19 08:47:23 +04 2020 armv7l
Previous: DD-WRT v3.0-r43171 std (05/16/20)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (Not 24/7; Not using IPv6, VAP, VPN; Using NAS & USB)
Reset: NO reset during firmware upgrade but cold boot
Summary
Again, short report this time.
Kernel size is reduced further, compared to build 42681 and then build 43171
Firmware Size
From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
.... <snipped> ....
From 26988544 (b.42366) to 26988544 (b.42514) = 0 bytes
From 26988544 (b.42514) to 29143040 (b.42681) = 2154496 bytes
From 29143040 (b.42681) to 27693056 (b.42914) = -1449984 bytes
From 27693056 (b.42914) to 27705344 (b.43055) = 12288 bytes
From 27705344 (b.43055) to 26619904 (b.43171) = -1085440 bytes
From 26619904 (b.43171) to 26345472 (b.43192) = -274432 bytes
_________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!