Posted: Sun May 10, 2020 14:21 Post subject: New Build - 05/09/2020 - r43099
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware:6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives: search)
• If start-up scripts do not work from USB add a delay e.g.: wait script or `sleep 25`
Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /tmp/var/log/messages', serial output, strace etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Router/Version: Asus RT-N66U
File: v3.0-r43099 big (05/09/20)
Previous: r43078
Reset: Yes
Kernel: Linux 4.4.222 #793 Sat May 9 17:05:07 +04 2020 mips
Mode: Gateway
Status: Working
Issues/Errors: No errors
Working well and I can verify that full 256MB memory access has returned to my RT-N66U.
Joined: 14 Sep 2019 Posts: 301 Location: Maine, USA
Posted: Sun May 10, 2020 17:35 Post subject:
Router/Version: Asus RT-N66U
File: dd-wrt.v24-43099_NEWD-2_K3.x_mega_RT-N66U.trx
Firmware: dd-wrt.v24-43099_NEWD-2_K3.x_mega.bin
Kernel: Linux 4.4.222 #797 Sat May 9 17:09:44 +04 2020 mips
Mode: AP/USB
Previous: r42617
Reset?: N
Status: Working
Router/Version: Asus RT-N12D
File: dd-wrt.v24-43099_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r43099 mega (05/09/20)
Kernel: Linux 4.4.222 #797 Sat May 9 17:09:44 +04 2020 mips
Mode: Router/OpenVPN client
Previous: r42617
Reset?: N
Status: Working, had to manually power off/on after flash
Router/Version: Asus WL-500G Premium v2
File: dd-wrt.v24_mega_generic.bin
Firmware: DD-WRT v3.0-r43099 mega (05/09/20)
Kernel: Linux 2.4.37 #60235 Sat May 9 08:21:43 +04 2020 mips
Mode: Router/USB
Previous: r42617
Reset?: N
Status: Working-USB not mounting
Router/Version: Linksys E2500 V3
File: dd-wrt.v24-43099_NEWD-2_K3.x_mega-e2500.bin
Firmware: DD-WRT v3.0-r43099 mega (05/09/20)
Kernel: Linux 4.4.222 #797 Sat May 9 17:09:44 +04 2020 mips
Mode: Router/USB
Previous: r42617
Reset?: N
Status: Working, had to manually power off/on after flash
Joined: 06 Feb 2020 Posts: 167 Location: Maharashtra, India
Posted: Sun May 10, 2020 17:36 Post subject:
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r43099 std (05/09/20)
Kernel: Linux 4.4.222 #60 SMP Sat May 9 15:44:36 +04 2020 armv7l
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r43078 std (05/07/20)
Status: Working Fine Temperatures: CPU 53.6 °C / WL0 46.5 °C / WL1 44.1 °C
SysLog error -
user.err : usbipd: error: socket: :::3240: 97 (Address family not supported by protocol)
Router/Version: Asus RT-AC66U
File/Kernel: dd-wrt-43099-Asus_RT-AC66U.trx
Previous/Reset: dd-wrt-42278-Asus_RT-AC66U.trx
Mode/Status: AP - not working
Issues/Errors: No Internet, even after multiple reboots and a post-flash reversion to factory defaults. _________________ My router: Asus RT-AC66U
Operating systems on devices that I use with that router: GNU-Linux; Windows 10; Android 13
Working well and I can verify that full 256MB memory access has returned to my RT-N66U.
Mine still reads 128 total, any where to check besides the gui?
Router/Version: RT-N66R
Mode: AP/Switch
File: DD-WRT v3.0-r43099 big (05/09/20)
Kernel: Linux 4.4.222 #793 Sat May 9 17:05:07 +04 2020 mips
Status: Working
Uptime: 1Hrs:17min
Temps: WL0 52.0 °C / WL1 50.5 °C
Router/Version: WNDR4500v2
Mode: AP/Switch
File: DD-WRT v3.0-r43099 giga (05/09/20)
Kernel: Linux 4.4.222 #781 Sat May 9 16:22:39 +04 2020 mips
Status: Working
Uptime: 1hrs:25min
Temps: WL0 42.7 °C / WL1 43.1 °C
Router/Version: WRT54GSv1
Mode: AP/Switch
File: DD-WRT v3.0-r43099 mega (05/09/20)
Kernel: Linux 2.4.37 #60235 Sat May 9 08:21:43 +04 2020 mips
Status: Working
Uptime: 1hrs:26min _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
Working well and I can verify that full 256MB memory access has returned to my RT-N66U.
Mine still reads 128 total, any where to check besides the gui?
Router/Version: RT-N66R
Mode: AP/Switch
File: DD-WRT v3.0-r43099 big (05/09/20)
Kernel: Linux 4.4.222 #793 Sat May 9 17:05:07 +04 2020 mips
Status: Working
Uptime: 1Hrs:17min
Temps: WL0 52.0 °C / WL1 50.5 °C
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43099 std (05/09/20)
Kernel: Linux 4.4.222 #55 SMP Sat May 9 14:51:59 +04 2020 armv7l
Previous: r43078
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 8hrs 11min
Temperatures: CPU 61.4 °C / WL0 44.5 °C / WL1 50.5 °C
Router/Version: Asus RT-N66U
File/Kernel: dd-wrt.v24-43099_NEWD-2_K3.x-big-RT-N66U.trx, Linux 4.4.222 #793 Sat May 9 17:05:07 +04 2020 mips
Previous/Reset: 43074 / no
Mode/Status: Wireguard Gateway to VPS, operational
Issues/Errors: currently working, need to test under load (multiple kodi devices use this tunnel)
Added a log of update from 43074 to 43099 and Screenshot of Memory Section in Webif.
Posted: Mon May 11, 2020 14:09 Post subject: RT-N66U build 43099
Router Model: Asus RT-N66U
Firmware Version: DD-WRT v3.0-r43099 big (05/09/20)
File: dd-wrt.v24-43099_NEWD-2_K3.x-big-RT-N66U.trx
Kernel Version: Linux 4.4.222 #793 Sat May 9 17:05:07 +04 2020 mips
Reset: No
Setup as wired AP with VAP and Wan port assigned to switch.
10 hour uptime
No issues observed. 256 memory is showing in GUI. Is JFFS2 size correct?
root@DD-WRT:~# grep -i err /var/log/messages
Dec 31 18:00:08 DD-WRT kern.info kernel: Writing ErrCtl register=80000ff0
Dec 31 18:00:08 DD-WRT kern.info kernel: Readback ErrCtl register=80000ff0
Dec 31 18:00:08 DD-WRT kern.info kernel: BRCM Errata: Disable CPU_WAIT
Dec 31 18:00:08 DD-WRT kern.info kernel: enable BCMA BUS Errata
Dec 31 18:00:08 DD-WRT kern.warn kernel: ERROR: Unknown flash, device_id:0x00
Dec 31 18:00:08 DD-WRT kern.err kernel: bcmsflash: found no supported devices
Dec 31 18:00:08 DD-WRT kern.err kernel: brcmnand: found no supported devices
Dec 31 18:00:08 DD-WRT kern.err kernel: nflash: found no supported devices
May 11 08:12:48 DD-WRT daemon.err httpd[849]: httpd : Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases
May 11 08:51:13 DD-WRT daemon.err httpd[849]: httpd : Request Error Code 408: No request appeared within a reasonable time period.
root@DD-WRT:~# grep -i warn /var/log/messages
Dec 31 18:00:08 DD-WRT kern.warn kernel: Primary instruction cache 32kB, 4-way, VIPT, I-cache aliases, linesize 32 bytes.
Dec 31 18:00:08 DD-WRT kern.warn kernel: Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Dec 31 18:00:08 DD-WRT kern.warn kernel: boardflags are 110
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Initializing host
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Reset RC
Dec 31 18:00:08 DD-WRT kern.warn kernel: boardflags are 110
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Initializing host
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Reset RC
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Fixing up bridge
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Fixing up bus 0
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI/PCIe coreunit 0 is set to bus 1.
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Fixing up bus 1
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI/PCIe coreunit 1 is set to bus 2.
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Fixing up bus 2
Dec 31 18:00:08 DD-WRT kern.warn kernel: mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Dec 31 18:00:08 DD-WRT kern.warn kernel: ERROR: Unknown flash, device_id:0x00
Dec 31 18:00:08 DD-WRT kern.warn kernel: No NAND flash type found
Dec 31 18:00:08 DD-WRT kern.warn kernel: No NAND flash type found
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: passivemode set to 0x0
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: txworkq set to 0x0
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: et_txq_thresh set to 0xce4
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_timeout set to 0x3e8
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_framecnt set to 0x20
Dec 31 18:00:08 DD-WRT kern.warn kernel: et_module_init: et_rxlazy_dyn_thresh set to 0
Dec 31 18:00:08 DD-WRT kern.warn kernel: bcm_robo_enable_switch: EEE is disabled
Dec 31 18:00:08 DD-WRT kern.warn kernel: eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.89.21 (r524987)
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Enabling device 0000:01:01.0 (0000 -> 0002)
Dec 31 18:00:08 DD-WRT kern.warn kernel: PCI: Enabling device 0000:02:01.0 (0000 -> 0002)
Dec 31 18:00:08 DD-WRT kern.warn kernel: nf_conntrack_rtsp v0.7 loading
Dec 31 18:00:08 DD-WRT kern.warn kernel: nf_nat_rtsp v0.7 loading
Dec 31 18:00:08 DD-WRT kern.warn kernel: lzma_compress: module license 'unspecified' taints kernel.
Dec 31 18:00:08 DD-WRT kern.warn kernel: Disabling lock debugging due to kernel taint