Posted: Tue May 05, 2020 11:53 Post subject: New Build - 05/05/2020 - r43055
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware:6246
• WDS does not work on Broadcom ARM devices(only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
• VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives: search)
• If start-up scripts do not work from USB add a delay e.g.: wait script or `sleep 25`
Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Hey someones night is someones morning, no problem.
TY for forwarding this, if it takes time... it will. Don't feel stressed or something!!! Very grateful for your responses and "workworkwork" for DD-WRT.
Have a nice evening / morning / midnight and stay healthy
Router/Version: Asus RT-N66U
File: r43055 big
Previous: r42954
Reset: Yes
Kernel: Mode: Gateway
Status: Not working
Issues/Errors: No wifi, no ethernet access
No access -- the wifi is out (no lights, no access) and I can't access through ethernet to see what is going on.
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Tue May 05, 2020 19:32 Post subject:
iFrog wrote:
I'm waiting for someone to post results for the R7000 before upgrading. It seems like there have been some successful upgrades reported, but none on my model yet.
Will update this post after seeing other reports and then upgrading if I choose.
apart of the usual boot hag stuff related with my set up or who knows...hmmm my R7000 is doing fine...you can
see what i run in my sig... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43055 std (05/05/20)
Kernel: Linux 4.4.221 #25 SMP Tue May 5 07:18:11 +04 2020 armv7l
Previous: r43028
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.
Uptime: 22min
Temperatures: CPU 61.4 °C / WL0 44.2 °C / WL1 50.2 °C
Joined: 08 May 2018 Posts: 14224 Location: Texas, USA
Posted: Wed May 06, 2020 3:15 Post subject: Cisco Linksys E4200 v1
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-43055_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r43055 mega (05/05/20)
Kernel: Linux 4.4.221 #547 Tue May 5 13:02:04 +04 2020 mips
Previous: DD-WRT v3.0-r43028 mega (04/29/20)
Reset: No
Mode:Client Bridge on 2.4GHz, AP on 5GHz Uptime: ~10 hours
Status: OK
Issues / Errors: None. Previous random/urandom messages gone from serial/syslog. Also, the squashfs error messages during post-flash process are now gone from serial logs -since the upgrade from 43007 alpha. Forgot to include that in previous report _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net