New Build - 04/29/2020 - r43028

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 2806

PostPosted: Wed Apr 29, 2020 17:11    Post subject: New Build - 04/29/2020 - r43028 Reply with quote
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: (DD-WRT website) HTTPS & FTP (If one link doesn't work, try another)

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Repository: Trac SVN changelog since last build r42954 (GitHub mirror)

Notes:
r41664 or later for SFE NAT (k3.2+), KRACK (k24+), PBR+SFE, CAKE & FQ_CODEL_FAST (reset!), GTK Rekey timer fixes.
• Reset button was broken in 40571; fixed in build 40750.
Experimental build option for Broadcom 8MB+ K2.x devices (limited currently): broadcom_K3X_mipsel32r1
• CVE-2019-14899 VPN fix (applicability depends on VPN setup) and GUI toggle: 6920, 6928, 6931, 6932 (WIP: 7040)
In-kernel Samba has been implemented this year and default min/max versions have changed 6954, 6957, with WSD support.
WireGuard 1.0 & tools! New GUI Tunnel options have appeared since r42872, script no longer required! Setup Guide is by egc.
Broadcom MIPS devices are now on the 4.4 kernel (N66U/AC66U trx' are broken atm due to highmem)

Issues, observations, and/or workarounds reported:
DNScrypt 1.95 can still be used in the GUI but v2 (not compatible) requires Golang and thus Entware: 6246
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) and bridge modes on k4.4 devices may sometimes work in some configurations in certain builds but are not supported by the bcmdhd driver. Use client or repeater instead.
VAPs not working at boot fixed for unbridged VAPs with r40564:40566. Workaround startup command:
sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas (there are a few alternatives: search)
If start-up scripts do not work from USB add a delay e.g.: wait script or `sleep 25`

Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 119
Location: Maharashtra, India

PostPosted: Wed Apr 29, 2020 17:37    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Kernel: Linux 4.4.220 #7 SMP Wed Apr 29 12:14:37 +04 2020 armv7l
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r42914 std (04/17/20)
Status: Working Fine, All ok including Wireless tab

Load Average 0.01, 0.09, 0.06

All wireless channels visible depending on channel width and extension channel selection. Seems earlier issue is fixed which was showing only 2 channels for R7000/R7000P

Syslog Warning -
daemon.warn dnsmasq[872]: no servers found in /tmp/resolv.dnsmasq, will retry
Syslog errors -
user.err : usbipd: error: socket: :::3240: 97 (Address family not supported by protocol)
daemon.err httpd[1172]: httpd : Request Error Code 404: File favicon.ico not found.
iFrog
DD-WRT User


Joined: 10 Apr 2019
Posts: 90

PostPosted: Wed Apr 29, 2020 19:02    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Kernel: Linux 4.4.220 #2 SMP Wed Apr 29 02:56:57 +04 2020 armv7l
Mode: Gateway/AP
Reset: No
Previous: DD-WRT 04-20-2020-r42954 v3.0
Status: Working Fine, including wireless. No issues to report.

Time: 15:39:10 up 1:54, load average: 0.03, 0.01, 0.00

To save time, I copied and pasted the above status, and filled in the details applicable to my specific setup. Hope this corrected the reporting problem, I was asked to.
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 64

PostPosted: Wed Apr 29, 2020 20:35    Post subject: Asus RT-AC68U r43028 Reply with quote
Router: Asus RT-AC68U
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Kernel: Linux 4.4.220 #2 SMP Wed Apr 29 02:56:57 +04 2020 armv7l
Status: working
Mode: Gateway
Reset: No
Services: NordVPN w/ openvpn client, SAMBA, FTP.
Wifi: 2.4/5.0Ghz working.
Received (RX) 100% 2235 OK, no error
Transmitted (TX) 100% 1848 OK, no error
DNS issues looks fine...Nice JOB guys.

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
claudinei
DD-WRT User


Joined: 21 Mar 2009
Posts: 64

PostPosted: Wed Apr 29, 2020 21:04    Post subject: Asus RT-AC3200 - r43028 Reply with quote
Router: Asus RT-AC3200
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Previus: r42925
Kernel: Linux 4.4.220 #7 SMP Wed Apr 29 12:14:37 +04 2020 armv7l
Status: working
Mode: Gateway
Reset: No
Services: SAMBA, FTP.
Wifi: 2.4/5.0Ghz working.
wl0
Received (RX)100% 23701 OK, 10 errors
Transmitted (TX)100% 26338 OK, no error
wl1
Received (RX) 100% 3211 OK, 9 errors
Transmitted (TX) 100% 5428 OK, no error

syslog: rt-ac3200 kern.warn kernel: dhd_flow_rings_delete_for_peer: ifindex 0

Nice JOB!

_________________
RT-AC68U
RT-AC3200
TL-MR3020
TL-WDR3600 v1
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5399
Location: Texas

PostPosted: Wed Apr 29, 2020 21:08    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r43028 mega (04/29/20)
Linux 4.4.220 #428 Wed Apr 29 18:16:02 +04 2020 mips
GUI install over r43012
'dd-wrt.v24-43028_NEWD-2_K3.x_mega.bin'
all good

#

Asus RT-N12D1
DD-WRT v3.0-r43028 mega (04/29/20)
Linux 4.4.220 #428 Wed Apr 29 18:16:02 +04 2020 mips
GUI install over r43012
'dd-wrt.v24-43028_NEWD-2_K3.x_mega.bin'
all good
nolimitz
DD-WRT Guru


Joined: 26 Nov 2010
Posts: 573

PostPosted: Wed Apr 29, 2020 21:15    Post subject: Reply with quote
abhijitat wrote:
Router/Version: Netgear R7000P
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Kernel: Linux 4.4.220 #7 SMP Wed Apr 29 12:14:37 +04 2020 armv7l
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r42914 std (04/17/20)
Status: Working Fine, All ok including Wireless tab

Load Average 0.01, 0.09, 0.06

All wireless channels visible depending on channel width and extension channel selection. Seems earlier issue is fixed which was showing only 2 channels for R7000/R7000P

Syslog Warning -
daemon.warn dnsmasq[872]: no servers found in /tmp/resolv.dnsmasq, will retry
Syslog errors -
user.err : usbipd: error: socket: :::3240: 97 (Address family not supported by protocol)
daemon.err httpd[1172]: httpd : Request Error Code 404: File favicon.ico not found.


My R7000P Still shows one channel, 5GHz AC/N mixed, VHT80. how many channels do you see on VHT80 and which region?
Abboo
DD-WRT User


Joined: 03 Apr 2016
Posts: 170

PostPosted: Wed Apr 29, 2020 21:37    Post subject: Reply with quote
Router Model: Netgear R8000
Firmware Version: DD-WRT v3.0-r43028 std (04/29/20)
Kernel Version: Linux 4.4.220 #7 SMP Wed Apr 29 12:14:37 +04 2020 armv7l
Reset: yes and reboot
Previous: r42514
Mode: Client
Wireless: 2.4 ghz
Services:vpn client, usb, samba
Status: Working
flyzipper
DD-WRT User


Joined: 21 Feb 2016
Posts: 471

PostPosted: Wed Apr 29, 2020 22:13    Post subject: Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r43028 std (04/29/20)
Kernel: Linux 4.4.220 #2 SMP Wed Apr 29 02:56:57 +04 2020 armv7l
Previous: r42954
Mode/Status: Gateway / working
Reset: no
Issues/Errors: Working well so far.

Uptime: 4hrs 6min
Temperatures: CPU 61.9 °C / WL0 44.5 °C / WL1 50.5 °C
gabrielra
DD-WRT Novice


Joined: 21 May 2015
Posts: 30

PostPosted: Wed Apr 29, 2020 22:32    Post subject: Reply with quote
Router/Version: Asus RT-N18U
File/Kernel: DD-WRT v3.0-r43028 std (04/29/20)
Reset: YES
Mode/Status: Gateway/AP
Issues/Errors: ProFTPD not working

I have an issue with ProFTPD. Folders are empty. I need to stop the service and enable start the service again via WEBGUI to get my files mounted again. Seems like the service starts before the mount process.

There is a way to automate the stop/enable again ?

Killall -HUP proftpd isn't working.

Thanks
CTEC
DD-WRT User


Joined: 10 Dec 2015
Posts: 84

PostPosted: Wed Apr 29, 2020 22:47    Post subject: Reply with quote
Belkin F7D3302 / F7D7302 v1
r43028 mega (04/29/20)
Linux 4.4.220 #428 Wed Apr 29 18:16:02 +04 2020 mips
Previous: r42954
Reset: Yes (update below)
Mode status: Client Bridge

Decided to be an early tester for k4.x kernel on MIPS, so I expect bugs. Glad that BS has accomplished this arduous undertaking.

Used 64k limit build as the CFE on this router fails when it's over 32K. Standard 128K build should also work but router still unable to use over 32K. It refuses specific build, but it accepts generic build. This has always been a problem for this router and similar Belkin routers.

Errors:
dmesg shows

Code:
random: nas: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 52 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 57 bits of entropy available)
random: nonblocking pool is initialized


Noticed a new entry in partitions.
Code:

cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00030000 00010000 "cfe"
mtd1: 007b0000 00010000 "linux"
mtd2: 0054d400 00010000 "rootfs"
mtd3: 00010000 00010000 "nvram"
mtd4: 00060000 00010000 "ddwrt"
mtd5: 00010000 00010000 "nvram_cfe"


Is this normal? Doesn't seem like it as I have never seen a nvram_cfe partition. dmesg shows:

Code:
Creating 5 MTD partitions on "Physically mapped flash":
0x000000000000-0x000000030000 : "cfe"
0x000000030000-0x0000007e0000 : "linux"
0x000000232c00-0x000000780000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
mtd: partition "rootfs" set to be root filesystem
0x0000007e0000-0x0000007f0000 : "nvram"
0x000000780000-0x0000007e0000 : "ddwrt"
Creating 1 MTD partitions on "Physically mapped flash":
0x0000007f0000-0x000000800000 : "nvram_cfe"
ERROR: Unknown flash, device_id:0x00
bcmsflash: found no supported devices
brcmnand: found no supported devices
nflash: found no supported devices


I think everything else works, but I think I will do a reset soon though these messages worry me.

Update: I did a reset and still get the same error messages (now more) and partitions.

Code:
random: dnsmasq: uninitialized urandom read (128 bytes read, 23 bits of entropy available)
random: dnsmasq: uninitialized urandom read (48 bytes read, 23 bits of entropy available)
br0: port 3(vlan2) entered forwarding state
random: nas: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
br0: port 2(eth1) entered forwarding state
br0: port 1(vlan1) entered forwarding state
random: nas: uninitialized urandom read (16 bytes read, 49 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
random: nas: uninitialized urandom read (16 bytes read, 54 bits of entropy available)
random: nonblocking pool is initialized


I don't have a nas setup (no USB storage attached), so why is it mentioned? USB service is disabled.

Well, it works. I may revert back to the previous K3.X build if these messages are something that I should not see.

_________________
ASUS RT-AC68R: 42954
Belkin F7D7302: 43078
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 174
Location: Szczecin, Poland EU

PostPosted: Thu Apr 30, 2020 0:37    Post subject: Reply with quote
This build totally not working for Netgear WNR3500L v2. After update fromm build Apr 20, 2020. I use ssh method usally. Flash operation good. I'm wait 30 seconds after finish and send reboot command via putty. After this operation It was only orange power led with working switch. I haven't any access to device. I try hard reset with small button on case. Without any changes. In next step I try force tftp method with reset button press and start device. Without any changes. Tftp can't to connect to my device. Finally I must use USB -> TTL cord and recovery router with serial connection. I'm use build #42954. It's rather stable. The newest build is step to brick the WNR3500L v2. It's some odd situation cause many users have rather good work on build from Apr 29. I don't know what's wrong.
Veritech
DD-WRT User


Joined: 02 Jan 2007
Posts: 191

PostPosted: Thu Apr 30, 2020 4:30    Post subject: WRT54GSv1 WNDR4500v2 RT-N66R Reply with quote
Router/Version: RT-N66R
File: DD-WRT v3.0-r43028 big (04/29/20)
Kernel: Linux 4.4.220 #424 Wed Apr 29 18:11:31 +04 2020 mips
Previous: 42954
Reset: No
Mode/Status: Working
Uptime: 5 min
Temps: WL0 52.6 °C / WL1 51.3 °C
Issues/Errors: None so far

Router/Version: WNDR4500v2
File: DD-WRT v3.0-r43028 giga (04/29/20)
Kernel: Linux 4.4.220 #412 Wed Apr 29 17:55:12 +04 2020 mips
Previous: 42954
Reset: No
Mode/Status: Working
Uptime: 13 min
Temps: WL0 41.6 °C / WL1 42.0 °C
Issues/Errors: A few ECC errors listed in syslog concerning jffs. Serious?

Code:
Dec 31 18:00:19 WNDR4500v2 kern.err kernel: __nand_correct_data: uncorrectable ECC error
Dec 31 18:00:19 WNDR4500v2 kern.warn kernel: jffs2: mtd->read(0x559 bytes from 0x5c9e000) returned ECC error


Router/Version: WRT54GSv1
File: DD-WRT v3.0-r42914 mega (04/17/20)
Kernel: Linux 2.4.37 #60022 Fri Apr 17 07:53:05 +04 2020 mips
Previous: 42914
Reset: No
Mode/Status: Upgrade failing or error in compile script for mega build
Uptime: 45 min
Issues/Errors: Logs all state flashing is successful then reboots. Attempted both GUI and CLI update. Both report success but fail or kernel and build number is incorrect in the compile. Still reports build 42914 and kernel 2.4.37 from April 17th. The standard build shows correct build and kernel version (43028 and 2.4.37 #60119).

_________________
Asus RT-N66R 45229 big
Netgear WNDR4500v2 45229 mega
Linksys WRT-54GSv1 45229 std
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 227

PostPosted: Thu Apr 30, 2020 4:59    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: r43028 dir868a-webflash.bin / Linux 4.4.220 #2 SMP Wed Apr 29 02:56:57 +04 2020 armv7l
Previous/Reset: r42954 dir868a-webflash.bin / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) / working
Issues/Errors: none
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 8483
Location: Texas, USA

PostPosted: Thu Apr 30, 2020 5:02    Post subject: Cisco Linksys E4200 v1 Reply with quote
Router Model / Version: Cisco Linksys E4200 v1
File: dd-wrt.v24-43028_NEWD-2_K3.x_mega.bin
Firmware: DD-WRT v3.0-r43028 mega (04/29/20)
Kernel: Linux 4.4.220 #428 Wed Apr 29 18:16:02 +04 2020 mips
Previous: DD-WRT v3.0-r43007 mega (04/26/20)
Reset: No
Mode: Client Bridge on 2.4GHz, AP on 5GHz
Uptime: ~2 hours
Status: OK
Issues / Errors: random/urandom syslog messages that were not present in K3.10 builds, but nothing that affects functionality.

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
Goto page 1, 2, 3, 4, 5  Next Display posts from previous:    Page 1 of 5
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum