Posted: Wed Apr 29, 2020 17:10 Post subject: New Build - 04/29/2020 - r43028
[WARNING]: This thread is only for feedback on this beta release for developers and the community's benefit.
DO NOT flash this beta release unless you understand the risks involved and specific device recovery methods.
Avoid discussions! Create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Notes:
• CVE-2019-14899 VPN fix from December, since then various revisions including recently 7040.
• In-kernel Samba has been implemented this year and default min/max versions have changed, with WSD support.
• VAP issue is fixed! For any Wireless Mode, create a VAP and both ath0/ath1 should now function properly.
• WireGuard 1.0 & tools! New GUI Tunnel options have appeared since r42872, script no longer required! Setup Guide is by egc.
Issues:
• There may be remaining issues for Samba (for example NTFS), with frequent updates.
Important:
• If reporting issues provide applicable info: syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.
• For firewall issues provide 'iptables -L', 'iptables -t nat -L' and the /tmp/.ipt file.
• Search existing SVN tickets before opening a new one. Before reporting, reset and manually setup (no nvram backup).
• Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Linksys EA8500
DD-WRT v3.0-r43028 std (04/29/20)
Linux 4.9.220 #541 SMP Tue Apr 28 16:24:14 +03 2020 armv7l
GUI install over r43012
I just put on EA8500 switch, VLAN, OVPN server, samba share
looky like everything is working
I might put it on main but not right now --- lots going on
and looks 'bout same as r43012 anyways on this unit but for lil kernel bump
-----
Netgear WNDR3700 V4
DD-WRT v3.0-r43028 std (04/29/20)
Linux 3.18.140-d4 #77043 Wed Apr 29 08:02:12 +04 2020 mips
GUI install over r43012
he's just a switch, samba share, OVPN server
all working just fine
Linksys EA8500
DD-WRT v3.0-r43028 std (04/29/20)
Linux 4.9.220 #541 SMP Tue Apr 28 16:24:14 +03 2020 armv7l
GUI install over r43012
I just put on EA8500 switch, VLAN, OVPN server, samba share
looky like everything is working
I might put it on main but not right now --- lots going on
and looks 'bout same as r43012 anyways on this unit but for lil kernel bump
-----
Netgear WNDR3700 V4
DD-WRT v3.0-r43028 std (04/29/20)
Linux 3.18.140-d4 #77043 Wed Apr 29 08:02:12 +04 2020 mips
GUI install over r43012
he's just a switch, samba share, OVPN server
all working just fine
blackraiin, I mainly use linux Debian but have WIN10 handy.
just guessing you are asking about samba mounts
No problems at all for me on any machine. You do know you have to use like so ---
routerIP/sambasharename
I do use local DNS so mine are (from Debian machine)
AND
all mount just fine on the oldass MAC G5 PPC running Lubuntu
it's in back room and I ain't gonna go there to do any screenshots but this is what she is ---
root@da-box:~# uname -r
4.4.0-177-powerpc64-smp
root@da-box:~# uname -a
Linux da-box 4.4.0-177-powerpc64-smp #207-Ubuntu SMP Mon Mar 16 01:54:24 UTC 2020 ppc64 ppc64 ppc64 GNU/Linux
root@da-box:~# cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.6 LTS"
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Thu Apr 30, 2020 9:41 Post subject:
mrjcd wrote:
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 15248
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Retrieving information for the selected server...
Hosted by WesTex Connect (Abilene, TX) [130.81 km]: 39.853 ms
Looked like a worthwile way of testing speeds. After installing speedtest-cli, I tried to run mrjcd's command line ...
This is the reply I got in Helsinki:
Retrieving speedtest.net configuration...
Testing from DNA Oyj (<my public IP>)...
Retrieving speedtest.net server list...
ERROR: No matched servers: 15248
The 15248 must be a magic number, which works from Texas only ...
Router: Linksys EA8500
Kernel: Linux 4.9.220 #541 SMP Tue Apr 28 16:24:14 +03 2020 armv7l
Previous/Reset: Upgrade over r43012
Mode/Status: Access Point/Up and working 12 hrs
Issues/Errors: None that I could tell. Wireless has been very good the last few builds. When home I use WiFi calling on cell phone and much more stable than in past without the occasional dropped calls
The 15248 must be a magic number, which works from Texas only ...
many far away servers that DID work for me NO longer work as of last couple weeks & I dunno why ---
maybe they change sompin thinking you ain't got NO bussines cheking server over 1000 km away.
guess I could try some thru different VPN but really no point and there is too much world internet traffic these days anyways
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 15248
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Retrieving information for the selected server...
Hosted by WesTex Connect (Abilene, TX) [130.81 km]: 44.814 ms
Testing download speed................................................................................
Download: 48.09 Mbit/s
Testing upload speed......................................................................................................
Upload: 47.46 Mbit/s
Share results: http://www.speedtest.net/result/9363308580.png
Shaw Communications (Winnipeg, MB, Canada) [1841.95 km]no loger works for me
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 4244
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
ERROR: No matched servers: 4244
IBH IT-Service GmbH (Dresden, Germany) [8550.23 km]no loger works for me
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 2495
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
ERROR: No matched servers: 2495
Aus Net Servers Australia Pty Ltd (Sydney, Australia) [13673.09 km]no loger works for me
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 15899
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
ERROR: No matched servers: 15899
# 5211) AltusHost B.V. (Amsterdam, Netherlands) [7964.62 km]no loger works for me
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 5211
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
ERROR: No matched servers: 5211
mrjcd@Will-Be-Was:~$ speedtest-cli --share --server 17386
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Retrieving information for the selected server...
Hosted by Windstream (Dallas, TX) [170.52 km]: 33.14 ms
Testing download speed................................................................................
Download: 49.43 Mbit/s
Testing upload speed......................................................................................................
Upload: 49.12 Mbit/s
Share results: http://www.speedtest.net/result/9363315303.png
mrjcd@Will-Be-Was:~$
---
if you just use:
speedtest-cli it will pick closest server to you
or
speedtest-cli --share also include the neat image file that can be accessed
mrjcd@Will-Be-Was:~$ speedtest-cli
Retrieving speedtest.net configuration...
Testing from Brazos Internet (96.46.208.xxx)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by Spectrum (Fort Worth, TX) [124.98 km]: 23.996 ms
Testing download speed................................................................................
Download: 49.74 Mbit/s
Testing upload speed......................................................................................................
Upload: 49.44 Mbit/s
mrjcd@Will-Be-Was:~$
Mode/Status: Up and running for 16 hours, Gateway/Router/WiFi AP, static leases in file dnsmasq.common, 2,4GHz N/G mixed dynamic, 5Ghz AC/N-mixed VHT80, one VLAN on either band, JFFS on thumb drive shared as JFFS2 over samba, QoS: HTB/Cake, IPv4 & IPv6
Issues/Errors: none observed - performing well, just like other recent builds
Thanks to BS for excellent firmware, and MrJCD for the speedtest command:
7800
DD-WRT v3.0-r43012 (04/28/20)- i know it was pulled but had already applied
went from Kong to this build - full reset and nvram erase
having some random intermittent drops on the wireless . seems to drop but sync right back up after 1-2 seconds. i would say its stable 85% and then would just drop a device or two.
any ideas
I have been using mostly recoomended QCA settings - but therer are a bunch of new otions in this build - any guidance on how to set them as not sure what they mean, right now all the new ones are disabled