Joined: 08 May 2018 Posts: 14125 Location: Texas, USA
Posted: Sat Apr 18, 2020 14:00 Post subject: New Build 42925: 04-18-2020-r42925
[WARNING]: This thread is for reporting feedback for the benefit of the developers and the community. Please state your hardware model & version, mode(s), and specific firmware image used (e.g. dd-wrt.v24-00000_NEWD-2_K2.6_mega-nv60k.bin). Please avoid discussions or asking questions, this thread is not meant for support: Please open a new thread if you have questions or need help resolving issues. Failure to follow these simple rules may result in your posts being moved or deleted. DO NOT flash this beta release if you do not understand the risks and know your specific device recovery methods.
Important:BEFORE reporting any issues, reset and manually setup (no nvram backup).
Provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.) including "iptables" info for firewall issues (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).Search SVN tickets prior to opening a new one.
VAPs not working at bootfixed for unbridged VAPs with r40564:40566.Workaround startup command: sleep 10;stopservice nas;stopservice wlconf;startservice wlconf;startservice nas(there are a few alternatives: search)
If start-up scripts do not work from USB add a delay e.g.: wait script or `sleep 25`
Template example to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Asus RT-N12D1
DD-WRT v3.0-r42925 mega (04/18/20)
Linux 3.10.108-d10 #3690 Sat Apr 18 14:20:54 +04 2020 mips
'dd-wrt.v24-42925_NEWD-2_K3.x_mega.bin'
GUI install over r42872
working fine as a WAP
Router: r6300v2
Firmware: DD-WRT v3.0-r42925 std (04/18/20)
Reset: no
In-place upgrade from previous build
No love notes in syslog, services working properly. Seems like brainslayer has been pushing alot of changes around openvpn lately... Nothing to report at this time however.
Posted: Sat Apr 18, 2020 17:13 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r42925 std (04/18/20) Kernel: Linux 4.4.219 #1332 SMP Fri Apr 17 10:09:59 +04 2020 armv7l Mode: Gateway Reset: No Previous: 04-15-2020-r42910 Status: Working, Syslog in the GUI blanks (goes all white) after switching four or five pages and fails to retain log information.
grep -i err /var/log/messages (Initial Flash)
Dec 31 16:00:09 R7000 kern.err kernel: bcmsflash: found no supported devices
Dec 31 16:00:09 R7000 daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 16:00:09 R7000 daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 16:00:09 R7000 daemon.info mstpd[616]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Dec 31 16:00:09 R7000 daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 16:00:09 R7000 daemon.info mstpd[616]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Dec 31 16:00:12 R7000 local5.err ksmbd: [ksmbd-worker/1000]: ERROR: Can't open `/tmp/smb.db': No such file or directory
Dec 31 16:00:12 R7000 local5.err ksmbd: [ksmbd-worker/1000]: ERROR: User database file does not exist. Only guest sessions (if permitted) will work.
Dec 31 16:00:12 R7000 user.err wsdd2[995]: error: wsdd-mcast-v4: wsd_send_soap_msg: send
Dec 31 16:00:19 R7000 daemon.err httpd[1037]: httpd : Request Error Code 408: Unexpected connection close in intitial request
Dec 31 16:00:21 R7000 daemon.err ntpclient[1141]: Failed resolving address to hostname 2.pool.ntp.org: Try again
Dec 31 16:00:21 R7000 daemon.err ntpclient[1141]: Failed resolving server 2.pool.ntp.org: Network is down
Apr 18 10:02:22 R7000 kern.err kernel: hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Apr 18 10:02:31 R7000 daemon.err dnscrypt-proxy[1238]: Unable to retrieve server certificates
Apr 18 10:02:47 R7000 daemon.err dnscrypt-proxy[1238]: Unable to retrieve server certificates
Apr 18 10:03:05 R7000 daemon.err dnscrypt-proxy[1238]: Unable to retrieve server certificates
Apr 18 10:03:26 R7000 daemon.err dnscrypt-proxy[1238]: Unable to retrieve server certificates
Apr 18 10:03:50 R7000 daemon.err dnscrypt-proxy[1238]: Unable to retrieve server certificates
Apr 18 10:04:15 R7000 daemon.err dnscrypt-proxy[1461]: Unable to retrieve server certificates
Apr 18 10:04:31 R7000 daemon.err dnscrypt-proxy[1461]: Unable to retrieve server certificates
Apr 18 10:04:49 R7000 daemon.err dnscrypt-proxy[1461]: Unable to retrieve server certificates
Apr 18 10:05:10 R7000 daemon.err dnscrypt-proxy[1461]: Unable to retrieve server certificates
Apr 18 10:05:34 R7000 daemon.err dnscrypt-proxy[1461]: Unable to retrieve server certificates
Apr 18 10:06:15 R7000 daemon.err dnscrypt-proxy[1503]: Unable to retrieve server certificates
Apr 18 10:06:31 R7000 daemon.err dnscrypt-proxy[1503]: Unable to retrieve server certificates
Apr 18 10:06:49 R7000 daemon.err dnscrypt-proxy[1503]: Unable to retrieve server certificates
Apr 18 10:07:10 R7000 daemon.err dnscrypt-proxy[1503]: Unable to retrieve server certificates
Apr 18 10:07:34 R7000 daemon.err dnscrypt-proxy[1503]: Unable to retrieve server certificates
Apr 18 10:08:15 R7000 daemon.err dnscrypt-proxy[1555]: Unable to retrieve server certificates
I have been running the experimental versions for a couple of months now...
build 04-10-2020 experimental version is the last known good version for my router. On anything newer the WiFi doesn't work at all and doesn't even show up in the web interface.
Joined: 06 Jun 2006 Posts: 7463 Location: Dresden, Germany
Posted: Sun Apr 19, 2020 12:37 Post subject:
PITABoy wrote:
Router: ASUS RT-AC5300
I have been running the experimental versions for a couple of months now...
build 04-10-2020 experimental version is the last known good version for my router. On anything newer the WiFi doesn't work at all and doesn't even show up in the web interface.
Status: broken
usually related to the new wifi driver. let me check and fix
next time post logs. its more helpfull than just complaining (dmesg)
I have been running the experimental versions for a couple of months now...
build 04-10-2020 experimental version is the last known good version for my router. On anything newer the WiFi doesn't work at all and doesn't even show up in the web interface.
Status: broken
usually related to the new wifi driver. let me check and fix
next time post logs. its more helpfull than just complaining (dmesg)
edit: bug is fixed now
since you are talking about experimental driver, can you take a look at repeater mode + vap on the same radio?
never worked for me, thank's !
Posted: Sun Apr 19, 2020 20:44 Post subject: WRT54GSv1 WNDR4500v2 RT-N66R
Router/Version: RT-N66R
File: DD-WRT v3.0-r42925 big (04/18/20)
Previous: 42914
Reset: No
Kernel: Linux 3.10.108-d10 #3686 Sat Apr 18 14:16:24 +04 2020 mips
Mode: AP/Switch
Status: Working
Issues / Errors: None so far
Uptime: 1 day, 3:49
Temps: WL0 52.8 °C / WL1 51.3 °C
Router/Version: WNDR4500v2
File: DD-WRT v3.0-r42925 giga (04/18/20)
Previous: 42914
Reset: No
Kernel: Linux 3.10.108-d10 #3674 Sat Apr 18 14:04:26 +04 2020 mips
Mode: AP/Switch
Status: Working
Issues / Errors: None so far
Uptime: 1 day, 4:09
Temps: WL0 44.5 °C / WL1 44.6 °C
Router/Version: WRT54GSv1
File: DD-WRT v3.0-r42914 mega (04/17/20)
Previous: 42914
Reset: No
Kernel: Linux 2.4.37 #60022 Fri Apr 17 07:53:05 +04 2020 mips
Mode: AP/Switch
Status: Upgrade fails
Issues / Errors: Upgrade Fails
Uptime: 1hr:59min since last attempt
Temps: Usupported
The WRT54GSv1 Fails the upgrade on both WebUI and CLI flashing. Watching CLI output all flashing of blocks is completed and reboot requested. On reboot (I do not have a serial connection for this one yet) it still reports build 42914 as installed and lists no boot errors.