Posted: Mon Feb 20, 2023 9:40 Post subject: New Build - 02/20/2023 - r51787
Welcome to Broadcom r51787 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Linksys E2500
DD-WRT v3.0-r51787 mega (02/20/23)
Linux 4.4.302-st37 #21701 Mon Feb 20 06:01:44 +06 2023 mips
'dd-wrt.v24-51787_NEWD-2_K3.x_mega.bin
scp 'firmware.bin' install over r51729
all fine here -- up---> 5:19
Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r51787 std (02/20/23)
Kernel: Linux 4.4.302-st37 #8718 Mon Feb 20 04:43:42 +06 2023 armv7l
Mode: gateway
Previous: r50012
Reset: yes
Status: After upgrade router went into bootloop, had to reset and reconfigure from scratch. Now all seems stable again.
Firefox detected an issue and did not continue to download1.dd-wrt.com. The website is either misconfigured or your computer clock is set to the wrong time.
It’s likely the website’s certificate is expired, which prevents Firefox from connecting securely.
EDIT 2023-02-21: Solved
Last edited by Tectonic Plates on Tue Feb 21, 2023 17:52; edited 1 time in total
Firefox detected an issue and did not continue to download1.dd-wrt.com. The website is either misconfigured or your computer clock is set to the wrong time.
It’s likely the website’s certificate is expired, which prevents Firefox from connecting securely.
I also had the same problem with Firefox 110.
Update: The problem appears to be resolved! I was able to download files with no warning messages.
Last edited by PaulGo on Tue Feb 21, 2023 0:12; edited 1 time in total
Firefox detected an issue and did not continue to download1.dd-wrt.com. The website is either misconfigured or your computer clock is set to the wrong time.
It’s likely the website’s certificate is expired, which prevents Firefox from connecting securely.
I also had the same problem with Firefox 110.
Add an exception in FF for "https://download1.dd-wrt.com", and you won't see the warning...
HTTPS download page not working? _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Upgrade to this version brick the router Netgear r7000. It works after a factory reset, but it's impossible to restore the configuration from a copy, because that also brick the router.
Back to the previous version of r51741 (02-18-2023) and everything works. Something is wrong with version r51787 (02-20-2023) for this router.
Router/Version: Netgear R7000
File/Kernel: Linux 4.4.302-st37 #8694 SMP Sat Feb 18 03:53:47 +06 2023 armv7l
Previous/Reset: r51741/No
Mode/Status: Gateway & SFE:on & STP:off, DNSmasq, Tunels & WireGuard & PBR sources via WAN, Wireless:2,4/5 GHz & WPA2-PSK & Virtual, Use NVRAM for Client Lease DB, Encrypt DNS, Firewall:on, Port Forwarding, QoS
Issues/Errors: Bricked after update from r51741 to r51787. After rebooting after the update, not all the normal LEDs light up and no communication with the router.
Firmware: v3.0-r51787 std (02/20/23)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st37 #8714 SMP Mon Feb 20 04:18:00 +06 2023 armv7l
Previous: v3.0-r51576 std (02/04/23)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 56.4 °C / WL0 44.5 °C / WL1 49.5 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (Bell Canada "Fibe", 500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 N/G Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Firmware: v3.0-r51787 std (02/20/23)
Router/Version: Archer C9v1
File/Kernel: Linux 4.4.302-st37 #8696 SMP Sat Feb 18 04:28:30 +06 2023 armv7l
Previous/Reset: 02-18-2023-r51741/No
Mode/Status: Gateway and SFE:CTF / FA:CTF & FA, DNSmasq, Firewall:on, AP wired and wireless.
Issues/Errors:
Unstable after update from r51741 to r51787.
Rebooted after the update, saving/applying turned the web ui unresponsive by 8s, and available again.
After changing DNSmasq bricked, even turning off, waiting and turn on again didn´t solve.
Came back again after holding reset button.
The web ui persisted unresponsive after every change save/apply, then came back available after 8s.
I found that Flow Acceleration wasn´t available in this version.
Downgraded to previous version 02-18-2023-r51741, the web ui became stable again after every save/apply, running for hours.
