Nanostation M5 XW No conecta como Cliente

Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware basado en Atheros
Goto page 1, 2, 3  Next
Author Message
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 2:14    Post subject: Nanostation M5 XW No conecta como Cliente Reply with quote
Hola amigos, espero puedan ayudarme, he buscado en todo el foro y la web y no encuentro nada.

Tengo un Nanostation M5 XW... instale dd-wrt, compre licencia de activacion y superchannel.

El asunto es que no se conecta a mi ISP. Esta configurado modo cliente, les dejo log aunque no dice mucho.

Mi ISP tiene 3 AP en diferentes canales y en todos me pasa lo mismo.

Todos en 20 MHz

AP-1 CH 100 5500 11:11:11:11:11:11
AP-2 CH 104 5520 22:22:22:22:22:22
AP-3 CH 108 5540 33:33:33:33:33:33

Mis log:

Apr 15 01:34:54 DD-WRT kern.info kernel: [11948.900000] ath0: associate with 11:11:11:11:11:11 (try 1/3)
Apr 15 01:34:54 DD-WRT kern.info kernel: [11949.010000] ath0: associate with 11:11:11:11:11:11 (try 2/3)
Apr 15 01:34:54 DD-WRT kern.info kernel: [11949.130000] ath0: associate with 11:11:11:11:11:11 (try 3/3)
Apr 15 01:34:54 DD-WRT kern.info kernel: [11949.240000] ath0: association with 11:11:11:11:11:11 timed out


Apr 15 01:34:55 DD-WRT kern.info kernel: [11950.500000] ath0: associate with 22:22:22:22:22:22 (try 1/3)
Apr 15 01:34:56 DD-WRT kern.info kernel: [11950.610000] ath0: associate with 022:22:22:22:22:22 (try 2/3)
Apr 15 01:34:56 DD-WRT kern.info kernel: [11950.720000] ath0: associate with 22:22:22:22:22:22 (try 3/3)
Apr 15 01:34:56 DD-WRT kern.info kernel: [11950.830000] ath0: association with 22:22:22:22:22:22 timed out


Apr 15 01:34:57 DD-WRT kern.info kernel: [11952.100000] ath0: associate with 33:33:33:33:33:33 (try 1/3)
Apr 15 01:34:57 DD-WRT kern.info kernel: [11952.210000] ath0: associate with 33:33:33:33:33:33 (try 2/3)
Apr 15 01:34:57 DD-WRT kern.info kernel: [11952.320000] ath0: associate with 33:33:33:33:33:33 (try 3/3)
Apr 15 01:34:57 DD-WRT kern.info kernel: [11952.430000] ath0: association with 33:33:33:33:33:33 timed out


Gracias.


Last edited by kny on Wed Apr 15, 2020 3:07; edited 1 time in total
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 2:31    Post subject: Reply with quote
Este NO es un foro de soporte oficial para versiones / licencias de pago de DD-WRT y, por lo tanto, no puede reclamar soporte oficial aquí.

Installation Wiki

Where Do I Download Firmware?

Firmware FAQ

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2019/

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 3:05    Post subject: Nanostation M5 XW No conecta se como Cliente Reply with quote
Amigo, no estoy reclamando soporte... estoy pidiendo ayuda para solucionar el problema con mi router.

Saludos
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 3:11    Post subject: Reply with quote
Es decir, pedir apoyo, técnicamente. No estoy seguro de que las reglas del foro hayan cambiado desde que se publicaron sobre dispositivos con licencia pagados. Considere actualizar su versión de firmware a la versión más reciente de 2020 según los enlaces que publiqué.

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 3:15    Post subject: Nanostation M5 XW No conecta como Cliente Reply with quote
kernel-panic69 wrote:
Es decir, pedir apoyo, técnicamente. No estoy seguro de que las reglas del foro hayan cambiado desde que se publicaron sobre dispositivos con licencia pagados. Considere actualizar su versión de firmware a la versión más reciente de 2020 según los enlaces que publiqué.

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/



Instale todos los firmwares del 2020 y ademas los que estan listados en "Router Database" sin ningun resultado positivo.

No soy de estar preguntando en foros, primero busco en la web e intento todo lo que esta a mi alcance, creeme que esta es mi ultima y unica opcion de solucionarlo.

Saludos
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 3:28    Post subject: Reply with quote
Tu publicación en inglés dijo 40559. Si no funciona, entonces está roto, obviamente. Probablemente no se solucionará hasta la próxima versión, si es el problema, creo que es.

Realmente no nos ha dado ninguna configuración para ver para intentar ayudarlo si pudiéramos, esto también podría ser un error de configuración del usuario.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 3:31    Post subject: Nanostation M5 XW No conecta como Cliente Reply with quote
kernel-panic69 wrote:
Tu publicación en inglés dijo 40559. Si no funciona, entonces está roto, obviamente. Probablemente no se solucionará hasta la próxima versión, si es el problema, creo que es.

Realmente no nos ha dado ninguna configuración para ver para intentar ayudarlo si pudiéramos, esto también podría ser un error de configuración del usuario.



Digame que informacion necesita para ver que puede estar mal ?
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 3:37    Post subject: Reply with quote
La configuración inalámbrica es probablemente un buen comienzo. Mantenga el tamaño de la imagen a no más de 800x600.

https://wiki.dd-wrt.com/wiki/index.php/Client_Mode

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 4:07    Post subject: Nanostation M5 XW -- Not connect in Client Mode Reply with quote
kernel-panic69 wrote:
La configuración inalámbrica es probablemente un buen comienzo. Mantenga el tamaño de la imagen a no más de 800x600.

https://wiki.dd-wrt.com/wiki/index.php/Client_Mode



captura-de-pantalla_2020-04-14(1).jpg
 Description:
 Filesize:  163.9 KB
 Viewed:  12903 Time(s)

captura-de-pantalla_2020-04-14(1).jpg



captura-de-pantalla_2020-04-14.jpg
 Description:
 Filesize:  160.1 KB
 Viewed:  12903 Time(s)

captura-de-pantalla_2020-04-14.jpg


kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 4:11    Post subject: Nanostation M5 XW No conecta como Cliente Reply with quote
kernel-panic69 wrote:
La configuración inalámbrica es probablemente un buen comienzo. Mantenga el tamaño de la imagen a no más de 800x600.

https://`wiki.dd-wrt.com/wiki/index.php/Client_Mode



root@DD-WRT:~# iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2261 bytes
max # sched scan SSIDs: 0
max # match sets: 0
max # scan plans: 1
max scan plan interval: -1
max scan plan iterations: 0
Retry short limit: 7
Retry long limit: 4
Coverage class: 2 (up to 900m)
Device supports AP-side u-APSD.
Device supports T-DLS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP-128 (00-0f-ac:4)
* CMAC (00-0f-ac:6)
* CMAC-256 (00-0f-ac:13)
* GMAC-128 (00-0f-ac:11)
* GMAC-256 (00-0f-ac:12)
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
* P2P-client
* P2P-GO
* outside context of a BSS
* TDMA
Band 2:
Capabilities: 0x11ef
RX LDPC
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Frequencies:
* 5180 MHz [36] (20.0 dBm)
* 5185 MHz [37] (20.0 dBm) (no IR)
* 5190 MHz [38] (20.0 dBm) (no IR)
* 5195 MHz [39] (20.0 dBm) (no IR)
* 5200 MHz [40] (20.0 dBm) (no IR)
* 5205 MHz [41] (20.0 dBm) (no IR)
* 5210 MHz [42] (20.0 dBm) (no IR)
* 5215 MHz [43] (20.0 dBm) (no IR)
* 5220 MHz [44] (20.0 dBm) (no IR)
* 5225 MHz [45] (20.0 dBm) (no IR)
* 5230 MHz [46] (20.0 dBm) (no IR)
* 5235 MHz [47] (20.0 dBm) (no IR)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (no IR)
* 5265 MHz [53] (20.0 dBm) (no IR)
* 5270 MHz [54] (20.0 dBm) (no IR)
* 5275 MHz [55] (20.0 dBm) (no IR)
* 5280 MHz [56] (20.0 dBm) (no IR)
* 5285 MHz [57] (20.0 dBm) (no IR)
* 5290 MHz [58] (20.0 dBm) (no IR)
* 5295 MHz [59] (20.0 dBm) (no IR)
* 5300 MHz [60] (20.0 dBm) (no IR)
* 5305 MHz [61] (20.0 dBm) (no IR)
* 5310 MHz [62] (20.0 dBm) (no IR)
* 5315 MHz [63] (20.0 dBm) (no IR)
* 5320 MHz [64] (20.0 dBm) (no IR)
* 5500 MHz [100] (20.0 dBm)
* 5505 MHz [101] (20.0 dBm)
* 5510 MHz [102] (20.0 dBm) (no IR)
* 5515 MHz [103] (20.0 dBm) (no IR)
* 5520 MHz [104] (20.0 dBm)
* 5525 MHz [105] (20.0 dBm) (no IR)
* 5530 MHz [106] (20.0 dBm) (no IR)
* 5535 MHz [107] (20.0 dBm) (no IR)
* 5540 MHz [108] (20.0 dBm)
* 5545 MHz [109] (20.0 dBm) (no IR)
* 5550 MHz [110] (20.0 dBm) (no IR)
* 5555 MHz [111] (20.0 dBm) (no IR)
* 5560 MHz [112] (20.0 dBm) (no IR)
* 5565 MHz [113] (20.0 dBm) (no IR)
* 5570 MHz [114] (20.0 dBm) (no IR)
* 5575 MHz [115] (20.0 dBm) (no IR)
* 5580 MHz [116] (20.0 dBm)
* 5585 MHz [117] (20.0 dBm) (no IR)
* 5590 MHz [118] (20.0 dBm) (no IR)
* 5595 MHz [119] (20.0 dBm) (no IR)
* 5600 MHz [120] (20.0 dBm) (no IR)
* 5605 MHz [121] (20.0 dBm) (no IR)
* 5610 MHz [122] (20.0 dBm) (no IR)
* 5615 MHz [123] (20.0 dBm) (no IR)
* 5620 MHz [124] (20.0 dBm) (no IR)
* 5625 MHz [125] (20.0 dBm) (no IR)
* 5630 MHz [126] (20.0 dBm) (no IR)
* 5635 MHz [127] (20.0 dBm) (no IR)
* 5640 MHz [128] (20.0 dBm) (no IR)
* 5645 MHz [129] (20.0 dBm) (no IR)
* 5650 MHz [130] (20.0 dBm) (no IR)
* 5655 MHz [131] (20.0 dBm) (no IR)
* 5660 MHz [132] (20.0 dBm) (no IR)
* 5665 MHz [133] (20.0 dBm) (no IR)
* 5670 MHz [134] (20.0 dBm) (no IR)
* 5675 MHz [135] (20.0 dBm) (no IR)
* 5680 MHz [136] (20.0 dBm) (no IR)
* 5685 MHz [137] (20.0 dBm) (no IR)
* 5690 MHz [138] (20.0 dBm) (no IR)
* 5695 MHz [139] (20.0 dBm) (no IR)
* 5700 MHz [140] (20.0 dBm) (no IR)
* 5705 MHz [141] (20.0 dBm) (no IR)
* 5710 MHz [142] (20.0 dBm) (no IR)
* 5715 MHz [143] (20.0 dBm) (no IR)
* 5720 MHz [144] (20.0 dBm) (no IR)
* 5745 MHz [149] (20.0 dBm) (no IR)
* 5750 MHz [150] (20.0 dBm) (no IR)
* 5755 MHz [151] (20.0 dBm) (no IR)
* 5760 MHz [152] (20.0 dBm) (no IR)
* 5765 MHz [153] (20.0 dBm) (no IR)
* 5770 MHz [154] (20.0 dBm) (no IR)
* 5775 MHz [155] (20.0 dBm) (no IR)
* 5780 MHz [156] (20.0 dBm) (no IR)
* 5785 MHz [157] (20.0 dBm) (no IR)
* 5790 MHz [158] (20.0 dBm)
* 5795 MHz [159] (20.0 dBm) (no IR)
* 5800 MHz [160] (20.0 dBm) (no IR)
* 5805 MHz [161] (20.0 dBm) (no IR)
* 5810 MHz [162] (20.0 dBm) (no IR)
* 5815 MHz [163] (20.0 dBm) (no IR)
* 5820 MHz [164] (20.0 dBm) (no IR)
* 5825 MHz [165] (20.0 dBm) (no IR)
valid interface combinations:
* #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS, TDMA } <= 1,
total <= 2048, #channels <= 1, STA/AP BI must match
* #{ WDS } <= 2048,
total <= 2048, #channels <= 1, STA/AP BI must match
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
P2P GO supports CT window setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports active monitor (which will ACK incoming frames)
Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
Device supports ACK timeout estimation.
Device supports configuring vdev MAC-addr on create.
Supported extended features:
* [ RRM ]: RRM
* [ CQM_RSSI_LIST ]: multiple CQM_RSSI_THOLD records
* [ TXQS ]: FQ-CoDel-enabled intermediate TXQs
* [ AIRTIME_FAIRNESS ]: airtime fairness scheduling
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 4:25    Post subject: Reply with quote
kernel-panic69 wrote:
La configuración inalámbrica es probablemente un buen comienzo. Mantenga el tamaño de la imagen a no más de 800x600.

https://wiki.dd-wrt.com/wiki/index.php/Client_Mode



root@DD-WRT:/tmp# cat ath0_hostap.conf
driver=nl80211
ctrl_interface=/var/run/hostapd
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
country_code=CN
tx_queue_data2_burst=2.0
wmm_ac_be_txop_limit=64
ieee80211n=1
dynamic_ht40=0
ht_capab=[HT20][LDPC][TX-STBC][RX-STBC1][DSSS_CCK-40]
hw_mode=a
channel=100
frequency=5500
beacon_int=100

interface=ath0.1
preamble=0
disassoc_low_ack=1
wmm_enabled=1
uapsd_advertisement_enabled=0
bssid=82:2A:A8:F5:EE:0F
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=ISP200
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 5:03    Post subject: Reply with quote
I have to switch to English. Does SuperChannel even work or apply? Does radar detection apply? And why not set short preamble and short GI? Also, why 20dbm and not 30dbm? Honestly, I am not familiar enough with the device, but that's the only things I see that may be improperly configured.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
kny
DD-WRT Novice


Joined: 15 Apr 2020
Posts: 24

PostPosted: Wed Apr 15, 2020 6:00    Post subject: Reply with quote
kernel-panic69 wrote:
I have to switch to English. Does SuperChannel even work or apply? Does radar detection apply? And why not set short preamble and short GI? Also, why 20dbm and not 30dbm? Honestly, I am not familiar enough with the device, but that's the only things I see that may be improperly configured.



Hice los cambios que me recomendabas... sin exito.




<7>[ 3645.970000] ath: EEPROM regdomain: 0x8348
<7>[ 3645.970000] ath: EEPROM indicates we should expect a country code
<7>[ 3645.970000] ath: doing EEPROM country->regdmn map search
<7>[ 3645.970000] ath: country maps to regdmn code: 0x3a
<7>[ 3645.970000] ath: Country alpha2 being used: US
<7>[ 3645.970000] ath: Regpair used: 0x3a
<7>[ 3645.970000] ath: regdomain 0x8348 dynamically updated by user
<6>[ 3646.700000] ath0: authenticate with 04:25:c5:2a:6e:30
<6>[ 3646.720000] ath0: send auth to 04:25:c5:2a:6e:30 (try 1/3)
<6>[ 3646.730000] ath0: authenticated
<6>[ 3646.760000] ath0: associate with 04:25:c5:2a:6e:30 (try 1/3)
<6>[ 3646.870000] ath0: associate with 04:25:c5:2a:6e:30 (try 2/3)
<6>[ 3646.980000] ath0: associate with 04:25:c5:2a:6e:30 (try 3/3)
<6>[ 3647.090000] ath0: association with 04:25:c5:2a:6e:30 timed ou
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14246
Location: Texas, USA

PostPosted: Wed Apr 15, 2020 6:05    Post subject: Reply with quote
kny wrote:
kernel-panic69 wrote:
I have to switch to English. Does SuperChannel even work or apply? Does radar detection apply? And why not set short preamble and short GI? Also, why 20dbm and not 30dbm? Honestly, I am not familiar enough with the device, but that's the only things I see that may be improperly configured.



Hice los cambios que me recomendabas... sin exito.



Did you reboot the router after you made changes?

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
feliciano
DD-WRT Guru


Joined: 24 Oct 2008
Posts: 1079
Location: Latin America

PostPosted: Wed Apr 15, 2020 11:50    Post subject: Reply with quote
Para ayudarnos a ofrecer sugerencias, por favor recordar colocar el build que se está usando en cada conjunto de pruebas.

De igual manera, como indicó kernel-panic69, se puede probar con otros builds, más nuevos o más viejos, para descartar si se trata de alguna falla de alguna serie en particular.

Por último, ¿Hay alguna configuración que sí funcione, por ejemplo, desactivando superchannel y otras funciones avanzadas? ¿Por ejemplo haciendo la conexión más básica posible (para probar)? Si se logra acotar lo que está fallando en particular, sería más fácil buscar una solución o paliativo.

_________________
If you want support, please read first the announcements and forum rules.
Si usted desea ayuda, por favor lea primero los anuncios y las reglas del foro.
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Hardware basado en Atheros All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum