Posted: Wed Aug 12, 2020 14:59 Post subject: Help for Buffalo WZR-HP-G300NH2 user/pass
Hi,
Got a bunch of buffalo wzr-hp-g300nh2,the version is A1C1,not seen in any post.
Press reset about 15 or 20 seconds,still the same as it's known to have run DD-WRT.
But user/pass are not known,so can't login to DD-wrt webgui.
Attached a USB-ttl to it.
Showed running dd-wrt,also a tftp window.
What can I do to reset nvram in this case?
Formerly debricked with tftp method,but this bunch of units doesn't work,10 seconds,12 seconds,even with the bootlog shows tftp server,waiting for 4 seconds,then press
Posted: Thu Aug 13, 2020 18:48 Post subject: Re: Help for Buffalo WZR-HP-G300NH2 user/pass
eeff11 wrote:
Hi,
Got a bunch of buffalo wzr-hp-g300nh2,the version is A1C1,not seen in any post.
Press reset about 15 or 20 seconds,still the same as it's known to have run DD-WRT.
But user/pass are not known,so can't login to DD-wrt webgui.
Attached a USB-ttl to it.
Showed running dd-wrt,also a tftp window.
What can I do to reset nvram in this case?
Formerly debricked with tftp method,but this bunch of units doesn't work,10 seconds,12 seconds,even with the bootlog shows tftp server,waiting for 4 seconds,then press
tftp -i 192.168.11.1 put d:\wzr.enc
nothing....
Help,any ideas?really at my wits end...
I dropped you a PM but here's the gist of how I got in when the default passwords failed me after flash upgrade and reset. Try the following:
telenet to 192.168.11.1
user: root
pwd: password
open browser to 192.168.11.1
user: admin
pwd: password