Posted: Mon Mar 30, 2020 13:40 Post subject: New Build - 03/30/2020 - r42819
This thread is for feedback on beta build r42819 for developers and users (configuration, status, errors & logs).
Avoid discussions, create a new thread for specific problems, questions or use search as this is not for support.
Please report hardware model, version, operating & wireless modes along with file name (factory, webflash).
Important: if reporting issues, provide applicable info (syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.)
or place into an SVN ticket. For firewall issues, also provide iptables info ('iptables -L', 'iptables -t nat -L', & the /tmp/.ipt file).
Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.
Flashing any beta build assumes you are responsible, have researched, know the risks and recovery methods.
If you don't understand your router, which file or recovery methods do NOT flash this experimental test build.
Notes: 1. CVE-2019-14899 VPN fix from December, since then various revisions including recently 7024.
2. In-kernel Samba has been implemented this year and default min/max versions have changed, WSD now supported.
Netgear - WNR2000v3
Image size (3735580) looks to be just over maximum for device (3735552). Any plans to bring size down or is this safe enough to flash?
Currently on r42747
Router: Netgear R7800
Firmware: DD-WRT v3.0-r42819 std (03/30/20)
Kernel: Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Status: Working
Reset: No
Previous: 42803
Errors: No
Temperatures : CPU 53.230 °C / ath0 48 °C / ath1 47 °C
New : library versions: OpenSSL 1.1.1e 17 Mar 2020 LZO 2.09
Working very well :
Router mode : DHCP
SFE Enable STP Disable
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
Local DNS
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not? _________________ Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Mon Mar 30, 2020 22:29 Post subject:
MLandi wrote:
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?
R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin' _________________ FORUM RULES
NOT a problem with SSH --- Worky fine for me
... then again I have 'Secure Shell' Password Login Disable.
I use a RSA 3072 SHA256 key ...same key on all of'em below
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?
R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin'
Joined: 21 Jan 2017 Posts: 1783 Location: Illinois Moderator
Posted: Mon Mar 30, 2020 22:52 Post subject:
msoengineer wrote:
MLandi wrote:
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?
R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin'
Problem solved, I had to hard reboot the R9000 router via power button. Now I can get access via ssh. _________________ FORUM RULES
Joined: 08 May 2018 Posts: 14224 Location: Texas, USA
Posted: Tue Mar 31, 2020 0:12 Post subject:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r42819 std (03/30/20)
Kernel: Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Previous: DD-WRT v3.0-r42747 std (03/20/20)
Reset: No
Mode: Status: OK
Uptime: ~12 hours
Errors: _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
