New Build - 03/30/2020 - r42819

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 1612

PostPosted: Mon Mar 30, 2020 13:40    Post subject: New Build - 03/30/2020 - r42819 Reply with quote
This thread is for feedback on beta build r42819 for developers and users (configuration, status, errors & logs).
Avoid discussions, create a new thread for specific problems, questions or use search as this is not for support.
Please report hardware model, version, operating & wireless modes along with file name (factory, webflash).


Important: if reporting issues, provide applicable info (syslog output, 'dmesg', 'cat /var/log/messages', serial output etc.)
or place into an SVN ticket. For firewall issues, also provide iptables info ('iptables -L', 'iptables -t nat -L', & the /tmp/.ipt file).
Be sure to include operating and wireless modes (Gateway, AP, CB, etc.) along with any relevant configuration information.

Flashing any beta build assumes you are responsible, have researched, know the risks and recovery methods.
If you don't understand your router, which file or recovery methods do NOT flash this experimental test build.


Downloads: (DD-WRT website) HTTPS & FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (or 'curl -k {file URL} -o {file}') with http (not https) or ftp. Then 'write {file} linux'.

Changelogs: SVN changelog since last build: r42813

Notes: 1. CVE-2019-14899 VPN fix from December, since then various revisions including recently 7024.
2. In-kernel Samba has been implemented this year and default min/max versions have changed, WSD now supported.

Issues: 1. VAP appears to break 2.4 Ghz from r42287 onward.
2.) There may be remaining issues with Samba, with frequent updates.

Example Template:
Code:
[b]Router/Version: [/b]
[b]Mode: [/b]
[b]Status: [/b]
[b]Errors: [/b]
[b]File: [/b]
[b]Previous: [/b]
[b]Kernel: [/b]
[b]Reset: [/b]
Sponsor
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5337
Location: Texas

PostPosted: Mon Mar 30, 2020 14:26    Post subject: Reply with quote
Linksys EA8500
DD-WRT v3.0-r42819 std (03/30/20)
Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
ok good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r42819 std (03/30/20)
Linux 3.18.140-d4 #74716 Mon Mar 30 05:15:36 +04 2020 mips
ok good

HFSC FQ_CODEL on the 3700v4
laptop on 2.4
http://www.dslreports.com/speedtest/61377851
https://www.nperf.com/r/3247265696756357-ozd5WUhn
Pjm7
DD-WRT Novice


Joined: 30 Mar 2020
Posts: 1

PostPosted: Mon Mar 30, 2020 14:49    Post subject: Reply with quote
Netgear - WNR2000v3
Image size (3735580) looks to be just over maximum for device (3735552). Any plans to bring size down or is this safe enough to flash?
Currently on r42747
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 215

PostPosted: Mon Mar 30, 2020 17:09    Post subject: Reply with quote
Router: Netgear R7800
Firmware: DD-WRT v3.0-r42819 std (03/30/20)
Kernel: Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Status: Working
Reset: No
Previous: 42803
Errors: No

Temperatures : CPU 53.230 °C / ath0 48 °C / ath1 47 °C

New : library versions: OpenSSL 1.1.1e 17 Mar 2020 LZO 2.09

Working very well :
Router mode : DHCP
SFE Enable
STP Disable
DNSMasq
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Check unsigned DNS replies
Local DNS
No DNS Rebind
ath0, ath1
Vpn (OpenVPN Client)

without VPN


with VPN
Vaako
DD-WRT User


Joined: 10 Jun 2009
Posts: 333

PostPosted: Mon Mar 30, 2020 17:59    Post subject: Reply with quote
Router/Version: R7800
Status: Runnin
Errors: No
Previous: r42819
Reset: Yes
Use DNSMasq for DNS: ON


Router R7800 IP: 192.168.1.1
Fritz modem IP: 192.168.178.1

The Fritzbox is not accesable anymore!
Need to get access again as I need this for managing my VoIP.

-
Used commands:

Startup
ifconfig `nvram get wan_ifname`:0 192.168.178.2 netmask 255.255.255.0

Firewall
iptables -t nat -I POSTROUTING -o `nvram get wan_ifname` -j MASQUERADE

Need to get access again as I need this for managing my VoIP.

_________________
Regards,
Vaako

1x Netgear R7800 Nighthawk - firmware not decided yet !!!!
1x Netgear R7000 Nighthawk r36410
1x Ubiquiti RouterStation Pro DD-WRT r23204 std (12/24/13)
1x Asus RT-N16 SVN revision 20675 NEWD-2 K2.6
1x Linksys E4200 v3.0 r34777 mega (01/31/18 )
1x Buffalo WZR-HP-G300NH B0 B0 Gargoyle FW
1x Linksys WRT600N v1.1 (Bricked)
1x Linksys WRT54GL v1.1 (DD-WRT 26446)
1x Linksys WRT54GS v2.2 (DD-WRT 26446)
1x Linksys RVS4000 (stock fw)
3x D-Link DWL-7100AP (openWRT)
2x TP-Link TL-WA801ND (Bridge mode) 100mW TX-Power
Asus WL-520GU SVN 16403M NEWD-2 Eko std-nokaid
4x Fonera with Gargoyle FW
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 316

PostPosted: Mon Mar 30, 2020 22:14    Post subject: Reply with quote
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?
_________________
Netgear R9000 X10
DD-WRT v3.0-r44628 std (10/22/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
QoS: HTB w/CAKE & ACK, SYN, FIN & RST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0
Xfinity 1Gbps(max)/42Mbps
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1364
Location: Illinois Moderator

PostPosted: Mon Mar 30, 2020 22:29    Post subject: Reply with quote
MLandi wrote:
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?


R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin'

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]44565 nightly (Main Router)
[EA8500]43192 nightly (2xOffsite)
[R7800]napping
[WDR3600]BS 42567 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5337
Location: Texas

PostPosted: Mon Mar 30, 2020 22:37    Post subject: Reply with quote
NOT a problem with SSH --- Worky fine for me Cool
... then again I have 'Secure Shell' Password Login Disable.
I use a RSA 3072 SHA256 key ...same key on all of'em below

Code:
mrjcd@Deb:~$ ssh root@ea8500.mrjcd.com
DD-WRT v3.0-r42819 std (c) 2020 NewMedia-NET GmbH
Release: 03/30/20
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-03-30 02:14:48 +03) built-in shell (ash)

root@EA8500:~# exit
Connection to ea8500.mrjcd.com closed.
mrjcd@Deb:~$ ssh root@3700v4-homeworld.mrjcd.com
DD-WRT v3.0-r42819 std (c) 2020 NewMedia-NET GmbH
Release: 03/30/20
Board: Netgear WNDR3700 V4
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-03-30 05:15:58 +04) built-in shell (ash)

root@3700v4-Homeworld:~# exit
Connection to 3700v4-homeworld.mrjcd.com closed.
mrjcd@Deb:~$ ssh root@VolusRTN12D1.mrjcd.com
DD-WRT v3.0-r42819 mega (c) 2020 NewMedia-NET GmbH
Release: 03/30/20
Board: Asus RT-N12B
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   http://www.dd-wrt.com
 
==========================================================


BusyBox v1.31.1 (2020-03-30 14:42:17 +04) built-in shell (ash)

root@VolusRTN12D1:~# exit
Connection to volusrtn12d1.mrjcd.com closed.
mrjcd@Deb:~$
johnnyNobody999
DD-WRT User


Joined: 10 Jan 2014
Posts: 345

PostPosted: Mon Mar 30, 2020 22:38    Post subject: Reply with quote
msoengineer wrote:
MLandi wrote:
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?


R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin'


ssh works fine on my R7800 routers.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 316

PostPosted: Mon Mar 30, 2020 22:49    Post subject: Reply with quote
Thanks. Now I need to figure out what changed on my system. I've tried three machines and all fail
_________________
Netgear R9000 X10
DD-WRT v3.0-r44628 std (10/22/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
QoS: HTB w/CAKE & ACK, SYN, FIN & RST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0
Xfinity 1Gbps(max)/42Mbps
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1364
Location: Illinois Moderator

PostPosted: Mon Mar 30, 2020 22:52    Post subject: Reply with quote
msoengineer wrote:
MLandi wrote:
I could not use SSH, dd-wrt would not recognize my password. Used the GUI to update, no issues. Clean reboot. SSH is still not working, it does not like my password, even though the GUI does. Can someone confirm that SSH is working or not?


R9000, using putty, network error: software cause connection abort. Well, this is new....I used putty SSH about two weeks ago with BS and it was working fine then... new issue, nfg if SSH ain't workin'


Problem solved, I had to hard reboot the R9000 router via power button. Now I can get access via ssh.

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]44565 nightly (Main Router)
[EA8500]43192 nightly (2xOffsite)
[R7800]napping
[WDR3600]BS 42567 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1442
Location: WCentral Indiana USA

PostPosted: Mon Mar 30, 2020 22:55    Post subject: Reply with quote
SSH working R7500v2.
Both PW and RSA key.

Telnet also works.
MLandi
DD-WRT User


Joined: 04 Dec 2007
Posts: 316

PostPosted: Mon Mar 30, 2020 23:53    Post subject: Reply with quote
Weird. I changed my password on the router and now it works. Hashing algorithm change? Windows update? Very strange.
_________________
Netgear R9000 X10
DD-WRT v3.0-r44628 std (10/22/20)
Gateway, AP
DNSMasq, SmartDNS, Local DNS
IPv4 & IPv6 (Prefix Delegation)
CloudFlare
QoS: HTB w/CAKE & ACK, SYN, FIN & RST
Static Leases & DHCP
2.4GHz: 10 + 6 (2457 MHz HT40), ACK Timing 0
5GHz: 100 + 106 (5500 MHz VHT80), ACK Timing 0
Xfinity 1Gbps(max)/42Mbps
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 7257
Location: Texas, USA

PostPosted: Tue Mar 31, 2020 0:12    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r42819 std (03/30/20)
Kernel: Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Previous: DD-WRT v3.0-r42747 std (03/20/20)
Reset: No
Mode: Cool
Status: OK
Uptime: ~12 hours
Errors: Cool

_________________
Official Forum Rules, Guidelines, and Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware?
DON'T use Chromium-based browsersRTFM/STFW - TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is?
Please DO NOT PM me with questions; Ask in the forum.

---------------------------------------------------------

Linux User #377467 counter.li.org / linuxcounter.net
giuliomagnifico
DD-WRT User


Joined: 11 Apr 2016
Posts: 335
Location: Italy

PostPosted: Tue Mar 31, 2020 6:36    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r42819 std (03/30/20)
Kernel: Linux 4.9.217 #536 SMP Mon Mar 30 02:08:38 +03 2020 armv7l
Previous: DD-WRT v3.0-r42747 std (03/20/20)
Reset: No
Mode: Router/WAN
Status: OK
Uptime: ~12 hours
Errors: NONE
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum