WRT600n v 1.1 and broadcom_K3X_mipsel32r1

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
pizzulicchio
DD-WRT User


Joined: 16 Dec 2009
Posts: 83
Location: Florence (ITALY)

PostPosted: Thu Mar 26, 2020 22:37    Post subject: WRT600n v 1.1 and broadcom_K3X_mipsel32r1 Reply with quote
Hi to all,
i'd like to test on my old but always glorious, WRT600N, the broadcom_K3X_mipsel32r1 release.

What is the correct flash order to flash this build?

currently i'm using this build :
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-20-2020-r42747/broadcom/dd-wrt.v24_mega_special_wrt600n.bin

but i'm not be able to flash :

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-20-2020-r42747/broadcom_K3X_mipsel32r1/dd-wrt.v24-42747_NEWD-2_K3.x_mega-nv64k.bin

What's wrong?
Sponsor
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Fri Mar 27, 2020 2:31    Post subject: Reply with quote
It means your going to brick your router if you don't know what your doing. I would not recommend "testing" on a wrt600n as there is no jtag to bring it back.
_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Fri Mar 27, 2020 2:56    Post subject: Reply with quote
BrainSlayer didn't really disseminate the actual procedure to flash that build AFAIK, just that he had tested it on this device. The only thing I can think of is TFTP flashing, but you do it at your own risk or bricking your router.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Fri Mar 27, 2020 4:59    Post subject: Reply with quote
about all I know...
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1180265#1180265

I am not sure I would want to brick the beauty, but it's been collecting dust for a long time over here...

I just remember how big of a PITA timing the TFTP client push would be on this router...but I was always able to recover it...

What's the advantage of this mipsel build vs the regular old bcm builds?

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Fri Mar 27, 2020 12:53    Post subject: Reply with quote
Newer patched kernel is probably the only "advantage". But if all you are using it for is as an AP, I don't see the need.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Fri Mar 27, 2020 16:47    Post subject: Reply with quote
So I tried to load the mipselr1 firmware on the 600N and it resulted in a bootloop so I had to TFTP back to V2.4 42803. I have an email in to BS to ask how to "properly" load the mipselr1 version on the 600N.

Also, I thought this was a 300mbps MCS router...both radios seem to top out at 270....it's been so long....is that the best on this thing-270? No 64-QAM 5/6 support? Am I forgetting to enable some feature...again...I've forgotten more than I can remember about the 600N.

EDIT:
I think it's because this was a draft N chipset and no short gain index of 400ns, only 800ns, which makes sense why it can't hit 300 then...

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
pizzulicchio
DD-WRT User


Joined: 16 Dec 2009
Posts: 83
Location: Florence (ITALY)

PostPosted: Sat Mar 28, 2020 13:58    Post subject: Reply with quote
Hi,
i have a serial pin connection to the mainboard of this router so it's easy to revert to a previous firmware using a tftp flash.
I have tested the K3X_mipsel32r1( and i can confirm the boot loop ) the days that i have wrote this article on the forum. Sad

the main reason of this post is to undertand WHY to use this kernel/build and how to flash.

i have found into the wiki of this router, at the end, that is possible to flash:
https://wiki.dd-wrt.com/wiki/index.php/WRT600N

for "msoengineer" i can confirm what i remember about the WRT600N, so 270 Mbit is the theorical max for this old router.
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Sat Mar 28, 2020 21:33    Post subject: Reply with quote
I just soldered on two 4 pin headers onto the board, but I cannot get putty to see the router. I am using this as my guide for the wiring:



Anyone know if this is correct?

I did not connect the 5V, as I was using past experience to not hook it up.

I confirmed my usb to ttl is working right.

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Sat Mar 28, 2020 21:39    Post subject: Reply with quote
It would help to see the reset of the reference. Maybe orientation is the issue?
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Sat Mar 28, 2020 23:04    Post subject: Reply with quote
No guide regrettably... Just the wikicat page with it...

I don't know if my USB to ttl is 5V or 3.3.... No way to tell...have to break out the multimeter...

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Sun Mar 29, 2020 2:35    Post subject: Reply with quote
msoengineer wrote:
I just soldered on two 4 pin headers onto the board, but I cannot get putty to see the router. I am using this as my guide for the wiring:



Anyone know if this is correct?

I did not connect the 5V, as I was using past experience to not hook it up.

I confirmed my usb to ttl is working right.


I can confirm the pin layout, my info here...

http://en.techinfodepot.shoutwiki.com/wiki/Linksys_WRT600N_v1.1#JTAG-Serial_Info

_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Sun Mar 29, 2020 4:49    Post subject: Reply with quote
either of these two make any sense? or should I be able to fully read the output?

I had to name them with a txt extension to upload.
putty logs below.



600n goofy2.txt
 Description:

Download
 Filename:  600n goofy2.txt
 Filesize:  1.72 KB
 Downloaded:  84 Time(s)


600n goofy.txt
 Description:

Download
 Filename:  600n goofy.txt
 Filesize:  1.73 KB
 Downloaded:  80 Time(s)


_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
Dark_Shadow
DD-WRT Guru


Joined: 31 Aug 2009
Posts: 2448
Location: Third Rock from the Sun

PostPosted: Sun Mar 29, 2020 6:33    Post subject: Reply with quote
msoengineer wrote:
either of these two make any sense? or should I be able to fully read the output?

I had to name them with a txt extension to upload.
putty logs below.


Should look kinda like:
Code:
Restarting system.
Decompressing...........done


CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Jan 18 15:59:34 CST 2008 (joseph@localhost)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network, rev 0x02)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10
, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20
, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev
0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev
 0x02)
Initializing Devices.
Boot partition size = 262144(0x40000)
PCI bus 0 slot 1/0: pci_map_mem: attempt to map 64-bit region tag=0x800 @ addr=1
8010004
PCI bus 0 slot 1/0: pci_map_mem: addr=0x18010004 pa=0x18010000
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 32768 KBytes

Total memory used by CFE:  0x80300000 - 0x804066F0 (1074928)
Initialized Data:          0x80337C80 - 0x8033AC10 (12176)
BSS Area:                  0x8033AC10 - 0x8033C6F0 (6880)
Local Heap:                0x8033C6F0 - 0x804046F0 (819200)
Stack Area:                0x804046F0 - 0x804066F0 (8192)
Text (code) segment:       0x80300000 - 0x80337C80 (228480)
Boot area (physical):      0x00407000 - 0x00447000
Relocation Factor:         I:00000000 - D:00000000

Invalid switch: -mask
Loader:raw Filesys:tftp Dev:(null) File:: Options:(null)
Loading: Failed.
Could not load :: Error
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ..... 2408448 bytes read
Entry at 0x80001000
Starting program at 0x80001000
CPU revision is: 0002901a
Primary instruction cache 32kb, linesize 16 bytes (4 ways)
Primary data cache 32kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (joseph@localhost) (gcc version 3.2.3 with Broadcom modific
ations) #2782 ¥| 2¤ë 28 19:10:16 CST 2008
Setting the PFC to its default value
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4785 rev 2 at 300 MHz
Calibrating delay loop... 299.82 BogoMIPS
Memory: 29812k/32768k available (2116k kernel code, 2956k reserved, 136k data, 7
6k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.1 (2006/08/19) Phillip Lougher
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
SCSI subsystem driver Revision: 1.00
 Amd/Fujitsu Extended Query Table v0.0 at 0x0040
Physically mapped flash: JEDEC Device ID is 0xE2. Assuming broken CFI table.
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 1277
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x007e0000 : "linux"
0x0013f430-0x007e0000 : "rootfs"
0x007e0000-0x007f0000 : "factory"
0x007f0000-0x00800000 : "nvram"
sflash: found no supported devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
hcd.c: ehci-hcd @ 00:02.1, PCI device 14e4:471a
hcd.c: irq 3, pci mem b8002800
usb.c: new USB bus registered, assigned bus number 1
hcd/ehci-hcd.c: USB 0.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: $Revision$ time 16:20:54 Feb 28 2008
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-ohci.c: USB OHCI at membase 0xb8002000, IRQ 3
usb-ohci.c: usb-00:02.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (256 buckets, 2048 max) - 384 bytes per conntrack
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
ipt_trigger : register proc success
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 (usagi-cvs) for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
FAT: bogus logical sector size 2788
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 2788
FAT: bogus logical sector size 2788
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
Algorithmics/MIPS FPU Emulator v1.5
adduser: /home/admin: No such file or directory
adduser: /home/admin: No such file or directory
adduser: /home/admin: No such file or directory
Changing password for admin
Bad password: too simple.

Warning: weak password (continuing).
Password changed.
adduser: /home/guest: No such file or directory
adduser: /home/guest: No such file or directory
adduser: /home/guest: No such file or directory
Changing password for guest
Enter the new password (minimum of 5, maximum of 8 characters)
Please use a combination of upper and lower case letters and numbers.
Enter new password: Bad password: too short.

Warning: weak password (continuing).
Re-enter new password: Password changed.
ERROR: group admin already exists!
ERROR: group guest already exists!
Broadcom Gigabit Ethernet Driver bcm5700 with Broadcom NIC Extension (NICE) ver.
 8.3.14 (11/2/05)
PHY ID unknown, assume it is a copper PHY.
eth0: Broadcom BCM4785 10/100/1000 Integrated Controller found at mem 18010000,
IRQ 5, node addr 001ee5fe6ac4
eth0: Unknown transceiver found
eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q V
LAN ON, NAPI ON
PCI: Enabling device 01:01.0 (0004 -> 0006)
eth1: Broadcom BCM4329 802.11 Wireless Controller 4.158.4.0
PCI: Enabling device 01:02.0 (0004 -> 0006)
eth2: Broadcom BCM432a 802.11 Wireless Controller 4.158.4.0
ufsd: driver loaded
UFSD version 5.28 (Jun 25 2007, 10:45:03)
NTFS read/write support included

ufsd: address 0xc0101060
Checking to see that USB initialization is done...
eth0: Using PCI INTX interrupt
device vlan1 entered promiscuous mode
device eth1 entered promiscuous mode
device eth2 entered promiscuous mode
RC_ACTION = 1003
System Start...
eth1: Numerical result out of range
waitpid: No child processes
wlconf eth1 down: No child processes
eth1: Numerical result out of range
eth1: Operation not supported
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth1: Invalid argument
eth2: Numerical result out of range
eth2: Numerical result out of range
eth2: Operation not supported
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
eth2: Operation not supported
eth2: Operation not supported
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
eth2: Invalid argument
br0: Cannot assign requested address
ifconfig, br0: Cannot assign requested address
*********************************************
Wi-Fi Simple Config Application - Intel Corp.
Version: Build 1.0.5, November 19 2006
*********************************************
Initializing stack... OK
Now starting stack
get mac = 00 1E E5 FE 6A C3
DEVICE PIN: 16808881
(easytest.c->main(263)) Start easytest 20061221 14:23
(easytest.c->main(346)) Fail to SetSockopt IP_MULTICAST_IF
(easytest.c->main(357)) set socket option IP_ADD_MEMBERSHIP error
(easyconf.c->main(640)) Dream: Start easyconf 20070725 17:48
(easyconf.c->main(712)) Fail to SetSockopt IP_MULTICAST_IF
(easyconf.c->main(723)) set socket option IP_ADD_MEMBERSHIP error
Dante's tiny TFTP Server is ready on port 69
Segmentation fault
Sending SIGTERM to all processes
Exiting Syslogd!
Terminated
Sending SIGTERM to all processes
Sending SIGKILL to all processes
Sending SIGKILL to all processes

_________________
Peacock Thread-FAQ -- dd-wrt Wiki

Testing Multiple Routers -- Bootloader Collection Project -- My Wiki
msoengineer
DD-WRT Guru


Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

PostPosted: Sun Mar 29, 2020 6:47    Post subject: Reply with quote
Well, I'm throwing the towel in on this one...I see there are two pads for resistors just below the tx and rx lines on the pcb...tried to jumper one of them and my iron was too hot and burned up the trace on the tx line out from the pcb (rx of ttl). Still get an output... But not clean... Something else is up.... Maybe you can sort out why the mipselr1 won't load...bs asked me to send my bootlog for troubleshooting...

He has the OG 1.0 of the 600N. I have the 1.1 and the mipsel firmware fails both tftp and webgui upgrade...

I know my ttl worked to flash my two ea8500's... Maybe got lucky? I'm not sure what is causing the gobbly gook output...need sleep... Night and thanks!

_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14126
Location: Texas, USA

PostPosted: Sun Mar 29, 2020 13:32    Post subject: Reply with quote
Usually, garbled output is a loose or bad connection. I've had to reflow solder and all kinds of fun on some devices.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum