New Build - 03/18/2020 - r42729

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3888

PostPosted: Wed Mar 18, 2020 11:25    Post subject: New Build - 03/18/2020 - r42729 Reply with quote
New Build - 03/18/2020 - r42729

ftp://ftp.dd-wrt.com/betas/2020/03-18-2020-r42729/

https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-18-2020-r42729/

Release Notes: http://svn.dd-wrt.com/

Router model and version? Config? Status? Errors? What's your experience?
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 12452
Location: Texas, USA

PostPosted: Wed Mar 18, 2020 12:53    Post subject: New Build 42729: 03-18-2020-r42729 Reply with quote
WARNING: DO NOT flash this experimental test build unless you know the risks and recovery methods. Report here to provide important info for developers and users. Always state your hardware model & version, mode (e.g. Repeater) and SPECIFIC build (e.g. netgear-r7000-webflash). Avoid discussions and create a new thread for specific problems or questions as this thread is not for support, and posts may be deleted or moved.

Downloads: if a link does not work, try another (alternative @DD-WRT website)
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2020/03-18-2020-r42729/
ftp://ftp.dd-wrt.com/betas/2020/03-18-2020-r42729/
Note: for wget (or curl) with CLI flash (`write {f/w} linux`), change the https to http, use `curl -k {link} -o {file}`, or ftp

Changelogs:
SVN* changelog since last build: 42681
Summary: (deprecated after 29739)
*Github mirror: https://github.com/mirror/dd-wrt/

Important: if reporting any issues, provide applicable info (GUI syslog, `dmesg`, `cat /var/log/messages`, etc.)
Or put into SVN ticket. For firewall issues, also provide "iptables" info (`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).

Notes:
1. SFE accelerated NAT is in 33006+ builds but only in kernel 3.2 and newer
2. 'KRACK' vulnerability fixes were completed in r33555 for non-Broadcom.
3. PBR/UDP with SFE working again since r40513 (see 6729)
4. CAKE scheduler changes "completed" with r41057 (see 5796) & FQ_CODEL_FAST with r41027 (reset first!)
5. Reset button was broken in 40571; fixed in build 40750.
6. CVE-2019-14899 VPN fix (r41784: applicability depends on VPN setup) and GUI toggle (r41812): ticket 6920, 6928, 6931, 6932
7. In-kernel samba now used and default min/max versions have changed, so change them if needed: 6954, 6957

Issues, observations, and/or workarounds reported:
1. DNScrypt is mostly only using v2 protocols now, but requires Golang that DD can't use (without entware): 6246

Template example to copy (after "Code:") for posting issues, be sure to include the mode in use (gateway, AP, CB, etc.):
Code:
[b][u]Router/Version:[/u][/b]
[b]Mode: [/b]
[b]File: [/b]
[b]Kernel: [/b]
[b]Status: [/b]

_________________
Official Forum Rules, Guidelines & Helpful InformationFirmware FAQInstallation WikiWhere Do I Download Firmware‽
DON'T use Chromium-based browsersRTFM/STFW TL;DR is NOT an excuse. • Why Should I Care What Color the Bikeshed Is‽
Please DO NOT PM me with questions; Ask in the forum. ---------------------- Linux User #377467 counter.li.org / linuxcounter.net
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Wed Mar 18, 2020 13:33    Post subject: DD-WRT v3.0-r42729 std (03/18/20) Reply with quote
WRT3200ACM V1 r42729 Firefox 74 (64-bit) webflash

OpenVPN CLIENT seems ok (nordvpn server)
5GHz wpa2 CCMP-128 (AES)conditional 40MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)conditional 20MHz Mixed
NAS via USB Samba conditional

Still having issues with the wifi dropping connections, and in many cases, requiring a router reboot to resolve. Samba issues I'm having seem to be related to the newer version options. If I use earlier "protocol version" settings, the request for credentials (which don't exist), seems to stay away. All my clients are current Windows 10.0.18363. So...
Argenis
DD-WRT User


Joined: 18 Feb 2019
Posts: 159

PostPosted: Wed Mar 18, 2020 18:18    Post subject: Re: DD-WRT v3.0-r42729 std (03/18/20) Reply with quote
scar1943 wrote:
WRT3200ACM V1 r42729 Firefox 74 (64-bit) webflash

OpenVPN CLIENT seems ok (nordvpn server)
5GHz wpa2 CCMP-128 (AES)conditional 40MHz Mixed
2.4GHz wpa2 CCMP-128 (AES)conditional 20MHz Mixed
NAS via USB Samba conditional

Still having issues with the wifi dropping connections, and in many cases, requiring a router reboot to resolve. Samba issues I'm having seem to be related to the newer version options. If I use earlier "protocol version" settings, the request for credentials (which don't exist), seems to stay away. All my clients are current Windows 10.0.18363. So...


Is the wireless mode set to mixed on your antennas?

If not, set it to mixed, apply and reboot, then see if it makes a difference.

_________________
Router: Linksys WRT3200ACM WLAN0 and 1 have same SSID
88W8964 802.11ac WLAN0 Mode AP VHT80 80MHz Mixed Mode Channel and Extension Channel Auto Extension LL-6
88W8964 802.11ac WLAN1 Mode AP 20 MHz Mixed Mode Channel Auto
SD8887 802.11ac disabled but visible on GUI and CLI
TX Power 18 dBm
Antenna Gain 0 dBi
U-APSD (Automatic Power Save)Enabled 
Protection Mode None
RTS Threshold Disabled
Short Preamble Disabled 
Short GI Enabled
Single User Beamforming Enabled
Multi User Beamforming Enabled 
AP Isolation Disabled
Beacon Interval 100
DTIM Interval 2
WMM Support Enabled 
Radar Detection Disabled 
ScanList default
Sensitivity Range (ACK Timing) 500 (Default: 500 meters)
Max Associated Clients 256 (Default: 256 Clients)
Minimum Signal for authenticate -128
Minimum Signal for connection -128
Poll Time for signal lookup 10
Amount of allowed low signals 3
Wireless security is WPA2 Personal CCMP-128 only
QAM256 is on
deathbyharakira
DD-WRT Novice


Joined: 18 Mar 2020
Posts: 1

PostPosted: Wed Mar 18, 2020 18:42    Post subject: Reply with quote
Alright, I chose the wrong time to flash ddwrt. I'm pretty sure I half bricked myself.

I had ddwrt on my 3200acm for a few years and switched back to the stock firmware when I saw it was updated in January. It was fine but I was noticing some weird issues every now and then but I was being lazy about switching back. I decided to do that today after a server I was running was constantly dropping internet friends but wasn't dropping me.

I flashed this version of the factory-to-ddwrt and I couldn't get to the web interface but the internet is working when I connect to the open DD-WRT network. I download putty and try to connect via ssh and telnet. It refuses to do either. I try the power off/on/off thing to switch partitions. No dice.

I have internet on an open network but I can't get to any admin interface. Any ideas? I just wanted to play minecraft with my friends. Sad

EDIT: Nevermind. I'm actually a little retarded. I switched to http instead of https and it happily lets me into the web interface.
James80
DD-WRT Novice


Joined: 09 Mar 2020
Posts: 22

PostPosted: Wed Mar 18, 2020 22:41    Post subject: Reply with quote
Linksys WRT1900ACS
Firmware v3.0-r42729 std (03/18/20)
Kernel:Linux 4.9.216 #1690 SMP Wed Mar 18 02:36:03 +03 2020
no reset
update from GUI

my 2 bands have problems, wifi disconnection, it was the same with the last build I had, R42335 and still the same. And not sure but my cpu temp seems to be pretty high??

Temperatures: CPU 75.1 °C / WL0 49.1 °C / WL1 50.6 °C

EDIT: I reflashed to older build, same thing so I tried the last stable openwrt build, no problem, no dropping wifi, no disconnection....

?


Last edited by James80 on Thu Mar 19, 2020 13:30; edited 1 time in total
Eyerex
DD-WRT User


Joined: 11 Feb 2016
Posts: 198
Location: South London

PostPosted: Thu Mar 19, 2020 10:08    Post subject: Reply with quote
Linksys 1900ACSv1

Upgraded from 03-05-2020-r42617 to 03-18-2020-r42729 no reset and everything working my end

PC, iPad v2, Amazon FireCube v2, Roku plus 4 Raspberry Pi's running Plex, PiHole, Tvheadend and Picoreplayer

Big thanks

_________________
| Netgear Nighthawk X4S R7800 | Linksys WRT1900ACS V1 | Huawei Echolife HG612 3B |
scar1943
DD-WRT User


Joined: 10 Nov 2018
Posts: 350
Location: South Carolina

PostPosted: Fri Mar 20, 2020 14:43    Post subject: Re: DD-WRT v3.0-r42729 std (03/18/20) Reply with quote
Argenis wrote:
Is the wireless mode set to mixed on your antennas?

If not, set it to mixed, apply and reboot, then see if it makes a difference.


Mixed mode has always been problematic for me. So far, the best and most dependable has been forcing "N" at a 20MHz spread. When I start mixing modes, things seem to be worse. Then the Coup de grace to keep things going is a reboot every 24 hours in the middle of the night.
oliver44
DD-WRT User


Joined: 01 Jun 2016
Posts: 211
Location: Romania

PostPosted: Fri Mar 20, 2020 18:10    Post subject: Reply with quote
Router Model:Linksys WRT1900ACS
Firmware Version:DD-WRT v3.0-r42729 (03/18/20)
Kernel Version:
Linux 4.9.216 #1690 SMP Wed Mar 18 02:36:03 +03 2020 armv7l
Current Time:Fri, 20 Mar 2020 20:01:24
Uptime:19:43
CPU Model:Marvell Armada 385
CPU Cores2
CPU Features:VFP VFPv3 NEON VFPD32 EDSP
CPU Clock:1600 MHz
Temperatures:CPU 68.4 °C / WL0 41.9 °C / WL1 43.5 °C

Connection Type 1Gbps PPPoE works
IPv6 Type DHCPv6 Prefix Delegation


Hi all,
I use the following installation model for ddwrt, on the first partition i use the latest firmware version from Linksys, and on the second partition I use dd-wrt, every time I use the factory-to install from the linksys web interface,for installation I use the waterfox browser 2020.03.1 (64-bit) never write on both sides ddwrt!
This firmware version runs well on wrt1900acs v2!
In this version, the allocation to IPv6 after making changes in the web interface works!!!!!!Cool Cool Cool
Details with the wireless configuration and other details can be found in the link below!
http://s.go.ro/xxn8diis

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS RCS & RDS 1Gbps
Linksys WRT1900ACS v.2 -OpenWrt/DD-WRT
WDR3600 rev.1.5 - OpenWrt


Last edited by oliver44 on Fri Mar 20, 2020 19:09; edited 1 time in total
oliver44
DD-WRT User


Joined: 01 Jun 2016
Posts: 211
Location: Romania

PostPosted: Fri Mar 20, 2020 18:37    Post subject: Reply with quote
It seems that the problem with allocating to ipv6 after making changes from the web interface in the wifi settings seems to stop allocating after saving the desired changes ...
I'll leave some logs ...
Mar 20 20:29:19 DD-WRT user.info : bridge : interface ath1 successfully added to bridge br0
Mar 20 20:29:19 DD-WRT user.info : radio_timer : radio timer daemon successfully started
Mar 20 20:29:19 DD-WRT user.info : dhcp6c : daemon successfully stopped
Mar 20 20:29:19 DD-WRT user.info : dnsmasq : daemon successfully stopped
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[14612]: exiting on receipt of SIGTERM
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: started, version 2.81rc4 cachesize 1500
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: compile time options: IPv6 GNU-getopt no-DBus no-UBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack no-ipset no-auth DNSSEC loop-detect no-inotify no-dumpfile
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq-dhcp[15046]: DHCP, IP range 192.168.1.100 -- 192.168.1.149, lease time 1d
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain test
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain onion
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain localhost
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain local
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain invalid
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain bind
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: reading /tmp/resolv.dnsmasq
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain test
Mar 20 20:29:20 DD-WRT user.info : dnsmasq : daemon successfully started
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain onion
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain localhost
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain local
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain invalid
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using only locally-known addresses for domain bind
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using nameserver .1#53
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: using nameserver 1#53
Mar 20 20:29:20 DD-WRT daemon.info dnsmasq[15046]: read /etc/hosts - 2 addresses
Mar 20 20:29:23 DD-WRT user.info : httpd : daemon successfully stopped
Mar 20 20:29:23 DD-WRT daemon.info httpd[14815]: httpd : httpd server shutdown
Mar 20 20:29:24 DD-WRT daemon.info httpd[15048]: httpd : httpd server started at port 80
Mar 20 20:29:24 DD-WRT daemon.info httpd[15048]: httpd : httpd SSL server started at port 443
Mar 20 20:29:24 DD-WRT user.info : httpd : http/https daemon successfully started
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA MLME: auth request, signal -63 (Accepted)
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA IEEE 802.11: authenticated
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA MLME: assoc request, signal -63 (Accepted)
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA IEEE 802.11: associated (aid 1)
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA RADIUS: starting accounting session F3FAF1
Mar 20 20:29:24 DD-WRT daemon.info hostapd: ath1: STA WPA: pairwise key handshake completed (RSN)
Mar 20 20:29:27 DD-WRT daemon.info hostapd: ath0: STA 6 MLME: auth request, signal -47 (Accepted)
Mar 20 20:29:27 DD-WRT daemon.info hostapd: ath0: STA IEEE 802.11: authenticated
Mar 20 20:29:27 DD-WRT daemon.info hostapd: ath0: STA MLME: assoc request, signal -47 (Accepted)

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS RCS & RDS 1Gbps
Linksys WRT1900ACS v.2 -OpenWrt/DD-WRT
WDR3600 rev.1.5 - OpenWrt
M
DD-WRT User


Joined: 29 Dec 2012
Posts: 176

PostPosted: Sat Mar 21, 2020 9:32    Post subject: Reply with quote
Have anyone find the router network speed after alive schedule reboot please?

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=323577

This build had been found the speed of network slow down after 2 hours with alive schedule reboot about WRT1900ACSV2.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum