Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Sun Mar 15, 2020 13:50 Post subject:
if you know how to unbrick those in case of....than go ahead
there a new builds, but i haven't seen anyone, that is using those 2 routers for ages...
so, i don't know where to point you out...as well i never had those units to help you with serial recovery, so you are on your own... not much help sry... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Sun Mar 15, 2020 15:02 Post subject: Re: Old Buffalo routers
zcx2009 wrote:
I have a WHR-G54S and WZR-RS-G54 that I would like to use in my home network as client bridges. [...]
What about even more recent builds e.g. 03-05-2020-r42617 or later?
You'd at least want builds w/ the rekey fix (in r41662). Start with 42617, though 42681 should be fine on k2.4 builds, nobody has reported on it yet (and k4.4 builds are getting a new irqbalance warning). _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Thank you gentlemen. I have flashed the WZR-RS-G54 with r42617 dd-wrt.v24_mega_generic.bin and all seems good configured as a client bridge. Nothing untoward reported by syslog.
Will try the WHR-G54S with r42617 and report back.
I have flashed the WZR-RS-G54 with r42617 dd-wrt.v24_mega_generic.bin and all seems good configured as a client bridge. Nothing untoward reported by syslog.
And note; if you haven't read the FAQ, etc...Client Bridge is not recommended for more than a single client. If you have issues, use WDS or Client Mode instead, if possible.
https://wiki.dd-wrt.com/wiki/index.php/Linking_Routers _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Done. Will keep an eye out for bugs and edit my post.
jwh7 wrote:
And note; if you haven't read the FAQ, etc...Client Bridge is not recommended for more than a single client. If you have issues, use WDS or Client Mode instead, if possible.
https://wiki.dd-wrt.com/wiki/index.php/Linking_Routers
Need one network for Airprint (mDNS multicast). Can't use WDS; primary router is different chipset.