Posted: Tue Nov 03, 2020 4:33 Post subject: Problem with Multiple IPV4 Wan Adresses to internal Servers
Hi i have a Problem with my Setup on
Router-Modell
TP-Link TL-WR841ND v10
Firmware-Version
DD-WRT v3.0-r44700 std (10/30/20)
Kernel Version
Linux 3.18.140-d5 #95164 Fri Oct 30 01:19:33 GMT 2020 mips
before i had a Wrt54 gl with much older Software version
I have 3 Ip V4 Wan adresses and Want to bind 2 on virtual internal interfaces to get the data to my servers
The following config was working on my old router for some years.
If thats a wrong way to do it, it would be perfect if you can give me a advice
WanIP1 is setup in normal config and is working without any problems
Thank you very much & regards
Last edited by Fox1Lead on Tue Nov 03, 2020 9:28; edited 1 time in total
Given the difference in age between the two routers, if I had to guess, there's a good chance the WAN interface name has changed from vlan1 to vlan2. That's why it's better to NOT hardcode such values but instead determine them dynamically.